18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
YSI 5200A Multiparameter Monitoring and Control InstrumentDesigned specifically for Aquaculture Systems, the YSI 5200A, AquaManager™ Software and AquaViewer II mobile app integrate process control, alarming, and data management into one solution. Simple enough to monitor one tank, powerful enough to manage a full scale farming operation from anywhere in the world. Simultaneously measure dissolved oxygen, pH, conductivity, ORP, salinity and temperature. YSI also offers a multi-channel dissolved oxygen monitor that can be networked with a 5200A or used independently. The 5500D can measure dissolved oxygen in up to four tanks/ponds using optical-based sensors which reduce maintenance and calibration requirements over traditional membrane-covered sensors. Engineered specifically for recirculating aquaculture systems, the YSI 5200A continuous monitor and AquaManager® Software can be used to integrate process control, feeding, alarming, and data management into one product or can be used to simply monitor one tank. Powerful enough to manage a full scale farming operation from anywhere in the world yet simple enough for anyone to use. Access your facilities water quality data at any time with the AquaViewer App from the App Store or manage your network with AquaManager desktop software.
Feed Smart software manages food delivery based on user-selectable inputs to manage feed delivery based on number of daily feedings, daily feed weights, total biomass and FCRs, along with parameter control based on water quality values. interfaces with most auto feeders. AquaManager desktop software provides the ability to instantly see an overview of your facility, manage parameter set points, and conveniently manage data to make informed operation decisions. If you're interested in a continuous monitor for dissolved oxygen, please visit the 5500D (optical dissolved oxygen) or 5400 (galvanic dissolved oxygen) page. The YSI IOEM and REM expansion modules increase the flexibility and capability of the YSI aquaculture platform when networked with 5200A, 5400 or 5500D instruments. Configure 4 (IOEM-4) or 8 (IOEM-8) analog channels as inputs or outputs for the ability to integrate 3rd party sensors or output from other devices. Outputs can be configured to control pumps, UV systems, analog valves, or send data to SCADA/ PLC systems. REMs (Relay Expansion Module) add relays where needed to control feeders, lighting, heaters, alarming, and more. | YSI 5500D MultiDO Optical Monitoring and Control InstrumentMultiDO Monitoring and Control Instrument Designed specifically for Aquaculture Systems, the YSI 5500D and AquaManager® Software integrate process control, alarming, and data management into one product. Simple enough to monitor one tank, powerful enough to manage a full scale farming operation from anywhere in the world. Simultaneously measure dissolved oxygen with optical technology in multiple tanks or ponds. Optical Dissolved Oxygen (DO) Meter for Continuous Monitoring and Control 5500D monitors and their optical probes proved to be a valuable tool for the management of super-intensive shrimp culture, allowing quick adjustments to be made to minimize stress from low DO while setting upper and lower DO limits helped to optimize oxygen use. Win a Free System! Enter to win - it's quick, easy and smart. Designed specifically for aquaculture systems, the YSI 5500D continuous monitor for dissolved oxygen and AquaManager® Software can be used to integrate process control, feeding, alarming and data management into one product or can be used to simply monitor one tank. With YSI's ODO® optical dissolved oxygen technology you'll benefit from reduced costs, less maintenance and better data. The ODO sensors require no membrane changes, no electrode cleaning, no stirring requirement and less frequent calibrations. Access your facilities water quality data at any time with the AquaViewer App from the App Store or manage your network with AquaManager desktop software.
•MultiDO monitor using optical DO technology; 1-4 DO probe inputs depending on model The standard conditional feed timer, Feed Smart, manages food delivery based on user's preset criteria. Manage feed delivery based on user-selectable inputs for the number of daily feedings, daily feed weights, total biomass and feed conversion ratios (FCRs), along with parameter control based on water quality values. Interfaces with most auto feeders. Optional AquaManager® desktop software allows you to view, configure, or setup instruments from the convenience of one central location. Instantly see an overview of your facility, manage parameter set points, and conveniently manage data to make informed operational decisions. The facility mapping feature provides an immediate overview of all ponds or tanks indicating their current state. The YSI IOEM and REM expansion modules increase the flexibility and capability of the YSI aquaculture platform when networked with 5200A, 5400 or 5500D instruments. Configure 4 (IOEM-4) or 8 (IOEM-8) analog channels as inputs or outputs for the ability to integrate 3rd party sensors or output from other devices. Outputs can be configured to control pumps, UV systems, analog valves, or send data to SCADA/ PLC systems. REMs (Relay Expansion Module) add relays where needed to control feeders, lighting, heaters, alarming, and more. | YSI 5400D MultiDO Monitoring and Control InstrumentMultiDO Monitoring and Control Instrument Designed specifically for Aquaculture Systems, the YSI 5400 and AquaManager® Software integrate process control, alarming, and data management into one product. Simple enough to monitor one tank, powerful enough to manage a full scale farming operation from anywhere in the world. Simultaneously measure dissolved oxygen in multiple tanks or ponds. Engineered specifically for aquaculture systems, the YSI 5400 and AquaManager® Software integrate process control, alarming, and data management into one product. Simple enough to monitor one tank, powerful enough to manage a full scale farming operation from anywhere in the world. Simultaneously measure dissolved oxygen in multiple tanks or ponds. Access your facilities water quality data at any time with the AquaViewer App from the App Store or manage your network with AquaManager desktop software.
Feed Smart software manages food delivery based on user-selectable inputs to manage feed delivery based on number of daily feedings, daily feed weights, total biomass and FCRs, along with parameter control based on water quality values. interfaces with most auto feeders. If you're interested in a continuous monitor for multiple parameters, please visit the 5200A page or if you'd prefer optical dissolved oxygen please visit the 5500D page. The YSI IOEM and REM expansion modules increase the flexibility and capability of the YSI aquaculture platform when networked with 5200A, 5400 or 5500D instruments. Configure 4 (IOEM-4) or 8 (IOEM-8) analog channels as inputs or outputs for the ability to integrate 3rd party sensors or output from other devices. Outputs can be configured to control pumps, UV systems, analog valves, or send data to SCADA/ PLC systems. REMs (Relay Expansion Module) add relays where needed to control feeders, lighting, heaters, alarming, and more. | YSI AquaViewer II AppThe YSI AquaViewer II App displays current and logged data acquired from YSI continuous monitoring and control aquaculture instruments - the 5200A, 5400 and 5500D. The app helps you keep a close watch on the water quality conditions at your facility.
The app makes it easy for aquaculture and aquatic life support system operators to monitor the water quality of their facilities, even when they are away from the facility. Current data is updated every 10 seconds giving the operator precise, real-time data. Data is logged every 10 minutes for historical data. AquaViewer II Features:
The App is free. Subscription includes monthly hosting fees and are based on the number of units being used. Compatible with Apple devices, versions iOS 9.0 or higher:
|
YSI AquaManager® SoftwareAquaManger desktop software allows for control and set up of any YSI monitoring instrument - 5200A, 5400 or 5500D AquaManager desktop software allows you to control and set up any instrument on the network (5200A, 5400, 5500D) to view data, set alarming options, and change relays or set points depending on application - conveniently from one central location. Instantly see an overview of your aquaculture facility, manage parameter set points, and manage your data in order to make informed operational decisions in real time. The browser-based format makes navigation and maintenance easy. The facility-mapping feature provides an immediate overview of all ponds or tanks indicating their current state - normal (inactive), control (active), or alarm (control hasn't corrected it and it's beyond the set point). All parameter and system settings can be managed from the desktop with AquaManager software. In order for issues at your facility to be quickly identified, a visual map can be created to look like your facility. When displayed on a monitor, anyone can see where and when maintenance or action is needed. Real-time data is continually displayed. A facility jpg or bmp file can be used as a background and data easily added in the foreground. Or access the library of icons provided to build your map. The icon library includes raceways, tanks, lights, pumps, valves, and much more in order to accurately depict what's needed for your facility. Just tailor it to your needs. | YSI IOEM Input, Output Expansion ModuleEnsure healthy livestock and maximum profits with tighter control of water quality and system parameters. The YSI IOEM and REM expansion modules increase the flexibility and capability of the YSI aquaculture platform when networked with 5200A, 5400 or 5500D instruments. Configure 4 (IOEM-4) or 8 (IOEM-8) analog channels as inputs or outputs for the ability to integrate 3rd party sensors or output from other devices. Outputs can be configured to control pumps, UV systems, analog valves, or send data to SCADA/ PLC systems.
* user-configurable inputs can be used for additional sensors like DO, pH, Total Gas Pressure, ORP, photo period, etc. Some sensors require an additional transmitter. Building a system is easy. Choose the expansion module appropriate for your needs (control, communications, etc.) and network with a 5200A, 5400, and/or 5500D with AquaManager®. REMs (Relay Expansion Module) add relays where needed to control feeders, lighting, heaters, alarming, and more. Applications:
| YSI REM-4 Relay Expansion ModuleEnsure healthy livestock and maximum profits with tighter control of water quality and system parameters. The YSI IOEM and REM expansion modules increase the flexibility and capability of the YSI aquaculture platform when networked with 5200A, 5400 or 5500D instruments. REMs (Relay Expansion Module) add relays where needed to control feeders, lighting, heaters, alarming, and more.
Building a system is easy. Choose the expansion module appropriate for your needs (control, communications, etc.) and network with a 5200A, 5400 and/or 5500D with AquaManager®. Configure 4 (IOEM-4) or 8 (IOEM-8) analog channels as inputs or outputs for the ability to integrate 3rd party sensors or output from other devices. Outputs can be configured to control pumps, UV systems, analog valves, or send data to SCADA/ PLC systems. Applications:
| YSI ODO Sensors for Monitoring and ControlOptical Dissolved Oxygen and Temperature Sensor for Aquaculture Continuous Monitoring and Control Engineered specifically for aquaculture applications, the optical dissolved oxygen sensor can be used with the 5500D MultiDO monitor for process control to ensure adequate oxygen levels for your livestock or for improved energy efficiency. With YSI’s ODO® optical dissolved oxygen technology you’ll benefit from reduced costs, less maintenance and better data. The ODO sensors require no membrane changes, no electrode cleaning, no stirring for accurate data and less frequent calibrations. You can also incorporate the DO sensor directly with your PLC via the RS485 communication. Additional inputs for barometric pressure and salinity are used to accurately calculate the DO % and mg/L. Features:
Applications:
|
YSI 5562 Polarographic DO, Temperature, and Conductivity CableThe 5562 probe and cable assembly is multiparameter and allows for the measurement of temperature, dissolved oxygen (polarograhic sensor), conductivity, and has a port for either a pH or pH/ORP sensor (must be ordered separately). It is available in lengths of 4 m, 10 m, and 20 m. . This cable is compatible with the 5200 and 5200A Multiparameter Monitoring and Control Instrument The 5562 probe and cable assembly includes a 559 polarographic sensor, a 5560 combination conductivity/temperature sensor and a 5204 DO Membrane Kit (2 mil, Teflon). Please order the 5564 pH/ORP sensor separately | YSI 5420 Galvanic DO Cable | YSI 5421 Galvanic DO and Temperature CableGalvanic dissolved oxygen and temperature cable for the 5400 multi-DO aquaculture instrument Comes with a 5405 DO Membrane Kit (2 Mil Teflon) | YSI 5561 Polarographic DO and Temperature CablePolarographic DO and Temperature Cable for the 5200A Instrument Comes with a 5204 DO Membrane Kit (2 Mil, Teflon) |