LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

Vibration Meters

Extech 407860 Heavy Duty Vibration Meter

Measure Acceleration, Velocity, and Displacement plus built-in PC interface

407860 Heavy Duty Vibration Meter has a Velocity range of 7.87 in./s or 200 mm/s; Acceleration range of 656 ft./s or 200 m/s, and Displacement range of 0.078 in. or 2 mm. It features a basic accuracy of 5%, a remote vibration sensor (magnetic or stud mounted) with a 39 in. (1 m) cable, RMS, Peak Value measurement modes, and auto/manual store with recall of up to 500 readings. The captured readings can be downloaded to your PC for further analysis using the optional Windows compatible data logging software. Meter comes complete with remote sensor, magnetic mount, 9V battery, holster with stand, and case.

  • Ranges - Acceleration: 200m/s², Velocity: 200mm/s, Displacement: 2mm
  • Remote vibration sensor with magnetic adapter on 39'' (1m) cable
  • Record mode stores the maximum and minimum values for later recall
  • Wide frequency range of 10Hz to 1kHz
  • Resolution to 0.5m/s², 0.5mm/s, and 0.005mm
  • Basic accuracy of ±(5% + 2 digits)
  • RMS or Peak Value measurement modes
  • Data Hold, Auto shut-off
  • 9V battery power or optional AC adaptor
  • Complete with remote sensor, magnetic mount, 9V battery, protective rubber holster with stand, and hard carrying case

Extech SDL800 Vibration Meter/Datalogger

Records data on an SD card in Excel® format

The SDL800 measures and datalogs vibration using a remote vibration sensor with magnetic adapter on 47.2''(1.2m) cable. It offers a wide frequency range of 10Hz to 1kHz with basic accuracy of ±(5% + 2 digits). Manually store 99 readings or continuously datalog using a SD memory card, which allows user to easily transfer collected data to a PC for further analysis as an Excel format. Complete with remote sensor, magnetic mount, 6 x AA batteries, SD card, and hard carrying case.

  • Remote vibration sensor with magnetic adapter on 47.2'' (1.2m) cable
  • Wide frequency range of 10Hz to 1kHz
  • Basic accuracy of ±(5% + 2 digits); Meets ISO2954
  • RMS, Peak Value or Max Hold measurement modes
  • Adjustable data sampling rate
  • Offset adjustment used for zero function to make relative measurements
  • Large backlit LCD
  • Stores 99 readings manually and continuous datalogging via SD memory card
  • Record/Recall MIN, MAX, Data Hold and Auto power off
  • Complete with remote sensor, magnetic mount, 6 x AA batteries, SD card, and hard carrying case

Extech VB300 3-Axis G-Force USB Datalogger

Records and times 3-axis shock and peaks

The VB300 is a G-Force datalogger which records and times 3-axis shock and vibration (acceleration) readings over its ±18g measurement range. This device will record 3-axis g-force and related peaks to provide a history of shock and vibration conditions. Complete with Magnetized/Bolt-on Mounting Base, 3.6V Lithium battery and Windows compatible analysis software.

  • Built-in 3-axis accelerometers record the time when shock occurs
  • Real time FFT Frequency and Time-Domain Vibration Analysis
  • Record storage, transport or operational data over time
  • USB interface for easy set-up and data download
  • Datalogs 112028 Motion Detection samples per axis, or 168042 Normal samples
  • Selectable X-, Y-, Z-axis or any combination (via software)
  • Selectable data sampling rate: 50ms to 24 hours
  • Manual and Programmable start modes
  • User-programmable alarm threshold
  • Long battery life
  • Complete with Magnetized/Bolt-on Mounting Base, 3.6V Lithium battery and Windows® compatible analysis software

Extech VB400 Pen Vibration Meter

Measures RMS Acceleration and Velocity

The VB400 is designed to provide easy and accurate velocity and acceleration measurements on industrial machinery. Measurement ranges including Acceleration (RMS): 656ft/s2; 20.39g; 200m/s2; and Velocity (RMS): 7. 87in/s; 2.00cm/s; 200mm/s. Wide frequency range from 10Hz to 1kHz. Lt has resolutions of 1ft/s2; 0.01g; 0.1m/s2 and 0.02in/s; 0.01cm/s; 0.1mm/s. Basic accuracy of ±(5% + 2 digits). Additional features include Zero adjustment, Data Hold, and Low battery indicator. Water and dust resistant to IP65. Complete with test pin tip, magnetic base, 4 × AAA batteries, and pouch case.

  • Measures RMS Acceleration and Velocity with metric and imperial units of measure
  • Measurement ranges:
    • Acceleration (RMS): 656ft/s²; 20.39g; 200m/s²
    • Velocity (RMS): 7.87in/s; 2.00cm/s; 200mm/s
  • Wide frequency range of 10Hz to 1kHz
  • Resolution to 1ft/s²; 0.01g; 0.1m/s² and 0.02in/s; 0.01cm/s; 0.1mm/s
  • Basic accuracy of ±(5% + 2 digits)
  • Zero adjustment, Data Hold, Low battery indicator
  • Water and dust resistant to IP65
  • Complete with test pin tip, magnetic base, 4 x AAA batteries, and pouch case

Extech VB450 Vibration Meter

Wide Frequency Vibration Meter with Displacement, Velocity and Acceleration Measurements

The VB450 is a convenient compact sized Vibration Meter which measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases. VB450 features a wide 10Hz to 1500Hz frequency range and provides Displacement, Velocity, and Acceleration measurement. Complete with remote sensor, magnetic mount, 9V battery, wrist strap, and soft case.

  • Remote vibration sensor with magnetic adapter on 7.9'' (0.2m) coiled cable
  • Wide frequency range of 10Hz to 1500Hz
  • Velocity (RMS), Acceleration (Peak), and Displacement (Peak-to-Peak) measurements
  • Automatic data hold after measurement button is released
  • Auto power off after 1 minute
  • Low battery indicator
  • Complete with remote sensor, magnetic mount, 9V battery, wrist strap, and soft case
   

Switch to Mobile Version