LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

Incubators

SURETHERM™ CO₂ INCUBATOR SERIES WITH INCUVIEW™ LCI

  • Internal microscope option
  • Precision temperature control
  • Excellent accuracy and recovery
  • Heated door and door frame

MYTEMP™ MINI CO2

At only 13 inches wide, the myTemp Mini CO2 is the smallest and most economical incubator for applications requiring CO2 gas control. Its small footprint makes the incubator ideal for use inside of biological safety cabinets, isolating sensitive cultures or for any laboratory simply trying to conserve bench space. With a thick layer of high efficiency insulation surrounding the chamber, the incubator is also ideal for transportation of cells. Once power has been disconnected, the incubator maintains temperature levels within 10% of the set parameter for up to 1 hour*. In addition

each model includes a 12V vehicle power adapter for operating the instrument in a car, boat, etc.

Both temperature and CO2 percentage are digitally adjustable and displayed in real time on the large LED control panel. This panel also features a “Cal” function, for easy in-lab calibration of the temperature or CO2. In addition, humidity (up to 80%) can be added to the chamber by inserting the included (stainless steel) humidity reservoir.

The CO2 level is constantly monitored using dual beam infrared sensing technology. In the event of a drop in CO2 , audible and visual alarms are triggered, notifying the user of the error.

Despite its small size, the incubator features a relatively large 20L chamber with the capacity for flasks and bottles up to 2 liters. Two removable, stainless-steel shelves are included. The shelves are perforated to improve airflow within the chamber.

* If disconnected from the CO2 supply, CO2 percentage decreases by approx. 1% /30 min
 

  • Digital control of temperature and CO2
  • Personal sized, 13 x 14.5″ footprint (20L)
  • Accepts bottles and flasks up to 2L
  • Includes 2 stainless steel shelves
  • Dual beam, infrared sensor

MYTEMP™65HC HEATING AND COOLING INCUBATOR

The myTemp 65HC Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications. A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.


With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature..

With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32″/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).
 

  • Accurate temperature control from 0° to 60°C
  • Powerful compressor maintains 0°C
  • Stainless-steel internal chamber
  • Internal power outlet for shaker, mixers, etc.
  • For floor standing use or on bench-tops less than 32″ tall
  • Ideal for BOD and Drosophila applications

SURETEMP™ PRECISION INCUBATORS

The new SureTemp™ Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck™ data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping.


Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode* (for exceptional temperature uniformity) or gravity convection mode* (for longer incubations where airborn contamination or drying of samples may be an issue). The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.

* Mechanical Convection: Incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperatue.
Gravity Convection: Eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature.

 

  • Precision temperature control up to 75°C
  • Dual-Convection technology, excellent uniformity and recovery
  • Includes SureCheck™ temperature logger and software
  • Stainless steel chamber with internal power outlet

MYTEMP™MINI DIGITAL INCUBATORS

The MyTemp Mini Incubators provide digital temperature control in a convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up (or cool down, -HC model only) while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel.


Despite a modest footprint of 14.5 x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 Liters. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation.
 

  • Digital temperature control
  • Personal sized, 13 x 14.5″ footprint (20 L)
  • Accepts bottles and flasks up to 2 L
  • Two models: Heat Only or Heat/Cool
  • Internal outlet, for installation of shaker, rockers, etc.

BENCHMARK CO2 INCUBATORS

With our unique and proprietary heat distribution technology, the Benchmark ST Series of CO2 incubators provide the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system, in combination with a low speed internal fan, uniformly spreads air throughout the chamber (without air exchange from the external environment). The chamber walls are constructed of high grade (316) stainless-steel, and all

corners are rounded, preventing the accumlation of dirt/debris.

For added security, all models feature an internal alarm to alert the user if the CO2 percentage changes, or the temperature fluctuates by more than 1°C from the set point. In addition, a “quick-cal” calibration button allows for quickly adjusting the chamer temperature to match that of a properly calibrated external thermometer.

Two series (standard and PLUS) are each available in 45L and 180L chamber sizes. PLUS models include advanced programming for high heat decontamination (at 125°C), a unique split inner glass door for access to the chamber without exposing it fully to the external environment and programmable humidity percentage, up to 95%.
 

  • Precision temperature control, 6-sided heating
  • Precise monitoring over CO2 with dual beam IR sensor
  • Seamless, stainless-steel chamber
  • Digital control of humidity percentage (PLUS models only)
  

Switch to Mobile Version