LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

DC Load Banks / Battery Capacity Testers

SBS-200CT FORKLIFT BATTERY REGENERATOR & DISCHARGE CYCLER

Motive Power Battery Discharge and Charge Cycle Testing with Individual Cell Monitoring Capabilities

The SBS-200CT is a discharge and charge cycler for battery testing and battery rejuvenation. The voltage range of 24–96 Vdc covers many types of traction batteries including: stationary, forklifts, automobile, golf cart, train, wheel chair, etc. When equipped with any industrial charger (compatible with most models, sold separately), the SBS-200CT provides an unmanned discharge and charge cycling solution to help increase battery capacity and prevent scrapping and warrantying those batteries. The unit includes wireless modules to collect and record individual cell readings during discharge/charge and software to generate detailed reports.
 

Applications

  • Telecommunications
  • Utility
  • UPS
  • Battery manufacturing
  • Industrial maintenance
  • Critical power
  • Data center

Benefits

  • Automatically run multiple discharge/charge cycles unmanned
  • Increase run time in sulfated batteries
  • Bring capacity back into warranty or scrap batteries
  • Extend battery service life
  • Quickly identify problematic cells with wireless modules
  • Generate custom reports for trending, records and reporting
  • Automatically protects and saves data from an unexpected test stop/end

Features

  • Wide voltage and current range from 24–96 Vdc / 0–200 Amps
  • 5.7 in. LCD touch screen
  • 30 parameter presets with stop/alarm points that can be adjusted during testing
  • 4 adjustable stop points and multiple alarm designs to control the discharge process intelligently
  • Wireless modules that measure and record individual cell voltages during testing
  • View test data in real time on screen or with computer via RS232
  • Download data after discharge to USB drive
  • Computer software for capacity evaluation and report generation

Computer Analysis Software

  • User friendly and easy to navigate
  • Data downloading and analyzing through real-time communication or USB memory devices
  • Software interface includes: battery voltages curve and bar chart, battery resistances bar chart, group voltage curve, current curve, capacities histogram, data form, etc.
  • Generate custom and detailed Excel reports with USB and software

Wireless Modules

  • Wireless modules included for collection of individual cell voltage data during testing
  • Advanced technology that wirelessly communicates readings between modules and load bank
  • Includes 1.2/2V wireless modules; 2/6/12V wireless modules available separately
  • One module supports voltage measurement for 4 cells
  • Easily locate failed cells in battery and estimate actual capacity of each cell

SBS-200CT Includes

  • Main unit
  • Instruction manual
  • Wireless 1.2/2V modules (qty. 10 +1 spare)
  • Computer analysis software
  • DC test (power) cables
  • 3 ft. AC power cable
  • RS232 wire
  • Carrying case with wheels

SBS-4815CT BATTERY CAPACITY TESTER

Battery Discharger / Capacity Tester for 20–60 Vdc Battery Systems

The SBS-4815CT is a fully programmable and portable constant current load bank including individual cell monitoring wireless modules with detailed data acquisition, display and reporting capabilities.

Built-in memory continuously records discharge data including: overall system voltage, current and individual cell voltages (when modules are installed).

Parallel Operation

Alone the SBS-4815CT has a 0–150 Amp constant current draw range. However it is possible to parallel additional load banks of the same voltage range with the SBS-4815CT to increase current draw.

With the optional P/N 8400-600A DC clamp the user can discharge up to 750 Amps and the SBS-4815CT will monitor the total DC current being drawn by up to three load banks in parallel.
 

Benefits

  • Can be powered from DC or AC power supply
  • Weighs only 21 lb.; designed for portability
  • Can be slaved with other load banks of the same voltage to increase discharge current

Features

  • Voltage and current range: 20–60 Vdc / 0–150 Amps
  • 5.7'' LCD touch screen
  • 4 adjustable stop points and multiple alarm designs to control the process intelligently
  • Wireless modules that measure and record individual cell voltages during testing
  • View test data in real time on screen or with computer via RS232
  • Download data after discharge to USB drive
  • Computer software for capacity evaluation and report generation

Analytical Software and Internal Memory

  • Powerful analytical software calculates test results and reports cell/battery conditions and capacity
  • Software interface displays detailed graphs and charts
  • Ability to export raw data into customized Excel reports
  • Automatically protects and saves data from an unexpected test stop/end
  • Menu interface provides data management operations for parameter settings, test results review, and download by RS232 or USB device to the computer software

Wireless Modules

  • Included for collection of cell voltage data during testing
  • Advanced technology that wirelessly communicates readings between modules and load bank
  • For 2/6/12V batteries
  • One module supports voltage measurements for up to 4 cells
  • Easily locate failed cells in battery and estimate actual capacity of each cell

SBS-4815CT Includes

  • Main unit
  • Instruction manual
  • Wireless 2/6/12 Volt modules (qty. 6 +1 spare)
  • Computer analysis software
  • DC test (power) cables
  • 3 ft. AC power cable
  • RS232 wire
  • Carrying case with wheels



 

SBS-1110S BATTERY CAPACITY TESTER

Constant Current DC Load Bank 125 Vdc 0–100 Amp

The only way to know if your stationary batteries will perform to specification is to test them regularly.

NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (NiCd) systems be discharge tested every six (6) years and valve regulated lead acid (VRLA) batteries every three (3) years. IEEE recommends load testing stationary flooded/vented lead acid and NiCd stationary batteries every five (5 )years and VRLA batteries every 12–18 months.

The SBS-1110S constant current load banks are an easy and affordable way to perform accurate IEEE450 (Vented Lead-Acid), IEEE1106 (Ni-Cad) and IEEE1188 (VRLA) load tests.

These units are quick and easy to set up. They display the voltage, current and Ah removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the test.

These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharge.

Built-in Protection

  • Audible alarm
  • Warning on LCD screen
  • High temperature shutdown
  • High voltage shutdown
  • Over load protection

Features

  • Many unit options with wide voltage and current range
  • Automatically discharges batteries unmanned without danger of over-discharging
  • Continuously holds the current set throughout the test
  • LCD screen displays real time voltage, discharge current and capacity/Ah removed
  • Test parameters are adjustable during test without stopping test
    • End system voltage
    • Discharge time
    • Discharge capacity (Ah)
  • Units can be slaved with the SBS-8400 and/or other load banks to increase amp draw

3 adjustable stop points

  • End system voltage
  • Discharge time
  • Discharge capacity (Ah)





 

SBS-1230S BATTERY CAPACITY TESTER

Constant Current DC Load Bank 125 Vdc 0–300 Amp

The only way to know if your stationary batteries will perform to specification is to test them regularly.

NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (NiCd) systems be discharge tested every six (6) years and valve regulated lead acid (VRLA) batteries every three (3) years. IEEE recommends load testing stationary flooded/vented lead acid and NiCd stationary batteries every five (5 )years and VRLA batteries every 12–18 months.

The SBS-1230S constant current load banks are an easy and affordable way to perform accurate IEEE450 (Vented Lead-Acid), IEEE1106 (Ni-Cad) and IEEE1188 (VRLA) load tests.

These units are quick and easy to set up. They display the voltage, current and Ah removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the test.

These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharge.
 

Built-in Protection

  • Audible alarm
  • Warning on LCD screen
  • High temperature shutdown
  • High voltage shutdown
  • Over load protection

Features

  • Many unit options with wide voltage and current range
  • Automatically discharges batteries unmanned without danger of over-discharging
  • Continuously holds the current set throughout the test
  • LCD screen displays real time voltage, discharge current and capacity/Ah removed
  • Test parameters are adjustable during test without stopping test
    • End system voltage
    • Discharge time
    • Discharge capacity (Ah)
  • Units can be slaved with the SBS-8400 and/or other load banks to increase amp draw

3 adjustable stop points

  • End system voltage
  • Discharge time
  • Discharge capacity (Ah)



 

SBS-2206S BATTERY CAPACITY TESTER

Constant Current DC Load Bank 250 Vdc 0–60 Amp

The only way to know if your stationary batteries will perform to specification is to test them regularly.

NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (NiCd) systems be discharge tested every six (6) years and valve regulated lead acid (VRLA) batteries every three (3) years. IEEE recommends load testing stationary flooded/vented lead acid and NiCd stationary batteries every five (5 )years and VRLA batteries every 12–18 months.

The SBS-2206S constant current load banks are an easy and affordable way to perform accurate IEEE450 (Vented Lead-Acid), IEEE1106 (Ni-Cad) and IEEE1188 (VRLA) load tests.

These units are quick and easy to set up. They display the voltage, current and Ah removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the test.

These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharge.


 

Built-in Protection

  • Audible alarm
  • Warning on LCD screen
  • High temperature shutdown
  • High voltage shutdown
  • Over load protection

Features

  • Many unit options with wide voltage and current range
  • Automatically discharges batteries unmanned without danger of over-discharging
  • Continuously holds the current set throughout the test
  • LCD screen displays real time voltage, discharge current and capacity/Ah removed
  • Test parameters are adjustable during test without stopping test
    • End system voltage
    • Discharge time
    • Discharge capacity (Ah)
  • Units can be slaved with the SBS-8400 and/or other load banks to increase amp draw

3 adjustable stop points

  • End system voltage
  • Discharge time
  • Discharge capacity (Ah)

 

SBS-2415S BATTERY CAPACITY TESTER

 

Constant Current DC Load Bank 250 Vdc 0–150 Amp

The only way to know if your stationary batteries will perform to specification is to test them regularly.

NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (NiCd) systems be discharge tested every six (6) years and valve regulated lead acid (VRLA) batteries every three (3) years. IEEE recommends load testing stationary flooded/vented lead acid and NiCd stationary batteries every five (5 )years and VRLA batteries every 12–18 months.

The SBS-2415S constant current load banks are an affordable way to perform easy and accurate IEEE450 (vented lead acid), IEEE1106 (NiCd) and IEEE1188 (VRLA) load tests.

These units are quick and easy to set up. They display the voltage, current and Ah removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the test.

These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharg
 

Built-in Protection

  • Audible alarm
  • Warning on LCD screen
  • High temperature shutdown
  • High voltage shutdown
  • Over load protection

Features

  • Many unit options with wide voltage and current range
  • Automatically discharges batteries unmanned without danger of over-discharging
  • Continuously holds the current set throughout the test
  • LCD screen displays real time voltage, discharge current and capacity/Ah removed
  • Test parameters are adjustable during test without stopping test
    • End system voltage
    • Discharge time
    • Discharge capacity (Ah)
  • Units can be slaved with the SBS-8400 and/or other load banks to increase amp draw

3 adjustable stop points

  • End system voltage
  • Discharge time
  • Discharge capacity (Ah)
 

 


SBS-4830S BATTERY CAPACITY TESTER

 

Constant Current DC Load Bank 20–40 Vdc 0–150 Amp / 40–60 Vdc 0–300 Amp

The only true way to be certain if your stationary batteries will perform to specification under load is to capacity test the batteries regularly.

NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (NiCd) systems be discharge tested every six (6) years and valve regulated lead acid (VRLA) batteries every three (3) years. IEEE recommends load testing stationary flooded/vented lead acid and NiCd stationary batteries every five (5) years and VRLA batteries every 12–18 months.

The SBS-4830S constant current load bank is an affordable way to perform easy and accurate load tests, including IEEE450 (vented lead acid), IEEE1106 (NiCd) and IEEE1188 (VRLA) load tests.

SBS load banks are quick and easy to set up. The SBS-4830S load bank includes a touch screen to set test parameters and display voltage, current and amp hours (Ah) removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the load test.

These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharge.
 

Built-in Protection

  • Audible alarm
  • Warning on LCD screen
  • High temperature shutdown
  • High voltage shutdown
  • Over load protection

Features

  • Many unit options with wide voltage and current range
  • Automatically discharges batteries unmanned without danger of over-discharging
  • Continuously holds the current set throughout the test
  • LCD screen displays real time voltage, discharge current and capacity/Ah removed
  • Test parameters are adjustable during test without stopping test
    • End system voltage
    • Discharge time
    • Discharge capacity (Ah)
  • Units can be slaved with the SBS-8400 and/or other load banks to increase amp draw

3 adjustable stop points

  • End system voltage
  • Discharge time
  • Discharge capacity (Ah)

SBS-8400 BATTERY CAPACITY TESTER

Battery Capacity Tester with Monitoring

10–300 Vdc, 0–120 Amp Constant Current Smart Load Bank with Individual Cell Monitoring Capabilities for NERC and IEEE load testing

The SBS-8400 is a versatile and fully programmable, constant current discharge load bank with detailed data acquisition and display capabilities. The unit features a user-friendly touch screen menu and a complete built-in data monitoring/acquisition system when paired with wireless modules and software.

Unlike basic load banks, the SBS-8400 is a high-tech solution for easy, efficient collection of data and generation of records for archiving.

Paralleling Load Banks

Alone, the SBS-8400 has a 0–120 Amp constant current draw range. However, it is possible to parallel additional compatible load banks with the SBS-8400 to increase the current.

With the optional P/N 8400-600A DC clamp the user can discharge up to 720 Amps and the SBS-8400 will monitor the total DC current being drawn by up to two (2) additional load banks in parallel.
 

Applications

  • Telecommunications
  • Utility
  • UPS
  • Battery manufacturing
  • Industrial maintenance
  • Critical power
  • Data center

Benefits

  • Automatically discharges batteries unmanned without danger of over-discharging
  • Individual cell monitoring capabilities via wireless modules
  • Can be used on a variety of systems with lead acid and/or nickel cadmium batteries
  • Test parameters are adjustable during test without stopping test
  • Automatically protects and saves data from an unexpected test stop/end
  • Easy to navigate unit menu and computer software
  • Download data after discharge to USB drive
  • Generates custom reports for trending, records and reporting with included software
  • Can be slaved with other load banks to increase amp draw up to 720 Amps

Features

  • Wide voltage and current range: 10–300 Vdc / 0–120 Amps
  • Wireless module connection that measures and records individual cell voltages
  • 5.7 in. LCD touch screen
  • 30 parameter presets that can be adjusted during testing
  • Selectable discharge mode: constant current (amps) / power (kW)
  • 4 adjustable stop points and multiple alarm designs to control the process intelligently
    • Low system voltage: 0–250 Vdc
    • Discharge time: 0–99 Hour 99 Min.
    • Discharge capacity: 0–9999 Ah
    • Low cell voltage: 0–15.00 V
  • View test data in real time on screen or with computer via RS232

Computer Analysis Software

  • User-friendly and easy to navigate
  • Data downloading and analyzing through real-time communication or USB memory devices
  • Software interface includes: battery voltages curve and bar chart, group voltage curve, current curve, capacities histogram data form, etc.
  • Generate custom and detailed Excel reports with USB and software

SBS-8400 Includes

  • Main unit
  • Instruction manual
  • Computer analysis software
  • 6 ft. DC cable set (pos. & neg.)
  • 3 ft. AC cable
  • RS232 wire
  • Case with wheels


Switch to Mobile Version