• Utilizes a precalibrated optical DataStick technology and unique sample chamber to meet or exceed USEPA Method 180.1
• Offers 0.001 NTU resolution
• Low flow rate and 135mL sample chamber limits calibration solution usage
• Integral temperature measurement and plug-and-play communication adapters

Recommended for:

• Drinking water
• Filter monitoring membrane filtration
• Distribution monitoring
• Wastewater effluent (clarified)
• Packaged water systems
• Food and beverage process

Features:

• Reagent-free amperometric design
• Trace DO system includes Trace DO Thermo Scientific™ DataStick™, flow cell, AV38 local display; assembled on the panel for simple installation
• Temperature compensated
• Pre-calibrated, plug & play sensors
• Rugged membrane in replaceable sensor cap
• Remote measurement, calibration, configuration and diagnostics
• Convenient turn-key AquaTrace DO monitoring system for reliable low DO measurements with a small footprint

Markets/Applications:

• Process water, production and distribution: Collect quality control data
• Food and beverage: Monitor process water quality
• Pure water analysis: Accurate trace DO measurements and minimal drift

DataStick:

• Provides universal conversion of sensor signals and interactive communications for measurement, calibration, configuration and diagnostics

Communications Adapter:

• Plugs into the DataStick to provide power and direct interactive communications with control systems

AV38 Local Display:

• Two-line display and seven-key navigation
• Data reporting with up to two current outputs
• Two Form C relays
• Digital communications
• AquaTrace ppb DO System with Trace DO ppb DataStick and flow cell installed
• Trace ppb Dissolved Oxygen Sensor Head Pre-calibrated for ppb level dissolved oxygen and temperature
• Can be plugged into any DataStick to yield accurate 24-bit data

AquaTrace ppb DO System:

• Trace DO ppb DataStick and flow cell installed

• Precalibrated for ppb level dissolved oxygen and temperature
• Can be plugged into any DataStick to yield accurate 24-bit data

Description

Perform differential pH measurements with a precalibrated plug-and-play sensor using the Thermo Scientific™ AquaSensors™ DataStick™ pH Measurement System. A replaceable reference junction contributes to long sensor life. Direct 24-bit data reporting is done via a variety of direct-to-PLC industrial communication protocols.

• Wastewater treatment
• Metal finishing (chrome/cyanide destruct)
• Bleaching pulp
• Disinfection control

• Connect this conductivity sensor directly to a PLC (Programmable Logic Controller) for seamless integration with industrial control systems.
• Use any computer to display data, calibrate and customize the measurement without an intermediate analyzer electronics box.
• Sensor heads are precalibrated and can be replaced or exchanged with any other type of sensor without taking the system down.

AquaSensors Conductivity/Resistivity DataStick:

• Provides universal conversion of sensor signals and interactive communications for measurement, calibration, configuration and diagnostics
• Precalibrated (no field calibration required)
• Plug and play sensor heads
• Two electrode measurement
• High accuracy temperature compensation
• Offered in a variety of materials
• Direct data reporting (24-bit)

Conductivity Sensor Head:

• Precalibrated for conductivity and temperature
• Can be plugged into any DataStick to yield accurate 24-bit data

Communications Adapter:

• Plugs into the DataStick to provide power and direct interactive communications with control systems

AV38 Local Display/Controller:

• Two line display and seven key navigation
• Data reporting with up to two current outputs
• Two Form C relays
• Digital communications
• The CPVC sensor head is all purpose, low cost and ideal for use in the Conductivity/Resistivity Measurement System
• The PEEK sensor head is food grade, applicable to high temperatures, and also ideal for use in the Conductivity/Resistivity Measurement System

Recommended for:

• Food processing
• Pharmaceutical applications
• Water production
• Reverse osmosis filters
• Desalination
• Deionization
• Ultrafiltration
• Distilled water
• Semiconductor power generation (steam production, condensate return, boiler blowdown, cooling towers, leak detection in heat exchangers, demineralizers)

• High resolution measurement
• Precalibrated (no field calibration required)
• Plug-and-play sensor heads
• 0 to 2S/cm range
• Offered in a variety of materials
• Direct data reporting (24-bit)
• Plug-and-play industrial communications adapters

• Clark cell technology
• Precalibrated (no field calibration required)
• Plug and play sensor heads and communication adapters
• Rugged, foul-resistant membrane
• Simple membrane cap replacement
• Direct data reporting (24-bit)

DataStick:

• Provides universal conversion of sensor signals and interactive communications for measurement, calibration, configuration and diagnostics

Communications Adapter:

• Plugs into the DataStick to provide power and direct interactive communications with control systems

Ozone Sensor Head:

• Precalibrated for ozone and temperature
• Can be plugged into any DataStick to yield accurate 24-bit data

AV38 Local Display/Controller:

• Two-line display and seven key navigation
• Data reporting with up to two current options
• Two Form C relays
• Digital communications

Recommended for:

• Drinking water treatment
• Wastewater treatment
• Food and beverage sanitation
• Bottled water production
• Pulp and paper bleaching
• Pharmaceutical cooling water

• Clark cell technology
• Precalibrated (no field calibration required)
• Plug and Play sensor heads and communication adapters
• Rugged, foul-resistant membrane
• Simple membrane cap replacement
• Direct data reporting (24-bits)

Recommended for:

Municipal and industrial wastewater: Aeration tanks, aerobic digesters, plant effluent monitoring (NPDES), anaerobic digester.

Continuously monitor dissolved oxygen (DO) in municipal and industrial applications with the Thermo Scientific™ RDO™ Pro-X Optical Dissolved Oxygen Sensor. The RDO Pro-X provides real-time, reliable data through continuous DO monitoring, which helps improve wastewater treatment operations.

Connect this advanced optical DO sensor directly to a PLC for seamless integration with industrial control systems. Use any computer to display data, calibrate and customize the measurement without an intermediate analyzer electronics box. Optional AV38 local display/controller is also available for more conventional installations offering single or dual sensor inputs. This versatile system is ideal for monitoring DO levels from 0 to 20 ppm throughout a wastewater treatment plant.

The AquaSensors  RDO  Pro-X is the latest generation in rugged luminescent dissolved oxygen technology for wastewater monitoring.

• 0 to 20ppm measurement range
• No membranes; only annual field replaceable caps
• Resists photo-bleaching and abrasive process media
• No “poisoning” by sulfides
• No cross sensitivity to carbon dioxide, ammonia, pH, sulfide, sulfate, chloride or hydrogen sulfide
• Plug-and-play design with digital network interface
• For local display, connect to AquaPro™ or AV38

Recommended for:

• Municipal and industrial wastewater
• Aquaculture
• Brewing
• Fermentation
• Bio-processing

The measurement system provides plug-and-play capability into any Thermo Scientific™ DataStick™ communications adapter for interactive measurement, calibration, configuration and diagnostics with industrial computers or with the Thermo Scientific™ AquaSensors™ AV38 local display and connects directly to a PLC.

Turbidity Measurement System Components:

• Wide-Range Water Turbidity Sensor Head
• Communications Adapter

Wash Head:

• For use in applications where the sensor head can be quickly fouled with sediment
• Head slips on the sensor body and wash nozzle aligns with sensor fingers
• Actuation controlled by AV38 wash relay programmed with wash interval and duration

AV38 Local Display/Controller:

• Two-line display and seven key navigation
• Data reporting with up to two current outputs
• Two Form C relays
• Digital communications

Recommended for:

• Drinking water
• Raw water monitoring
• Back water monitoring
   

  Accuracy	1% of reading
  Type	Wide-Range Turbidity Measurement System, Stainless Steel
  Approvals	Meets CE requirements for heavy industrial use
  Description	Stainless steel or CPVC
  Range	0 to 4000 NTU
  Resolution	0.1 NTU
  Step Response Time	90% in <15 sec.
  Certifications/Compliance	CE, UL, ISO
  Unit Size	-

• Wastewater effluent
• Process clarity monitoring

Recommended for:

Municipal/industrial wastewater, Pulp and paper, Dairy industry, Mining industry, Chemical process