LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

Voltage Testers and Current Testers

Extech 40130 Non-contact AC Voltage Detector

Non-contact detection of AC Voltage

40130 is capable of detecting the presence of live wires before testing, this pocket-size AC voltage detector features a low-profile tip that can be inserted into outlet receptacles or used to trace along wire insulation to locate breaks. This detector measures from 100 to 600 VAC (50/60 Hz) with visual (flashing red LED) alarms and audible (beeping) tones that can be switched off. Use for line out testing, locating breaks and control panel troubleshooting. CE approved and UL Listed. Complete with convenient size with pocket clip, and two AAA batteries.

  • Non-Contact Detection of AC Voltage from 100VAC to 600VAC
  • For use on 50/60Hz circuits
  • Tip fits into outlets or against wire insulation
  • Flashing red LED light and push button ON/OFF Audible beeper indicator

Extech DV20 AC Voltage Detector/Flashlight

Non-contact detection of AC Voltage (600V AC) with built-in flashlight

The DV20 is a pocket-sized non-contact voltage detector designed for quick voltage checks on live wires before testing. Other features of this detector is its LED flashlight for illuminating dimly lit areas, rugged double molded housing, and CAT III-600V safety rating. Designed for use on 50/60 Hz circuits. Comes with two AAA batteries and user guide.
 

  • Non-Contact Detection of AC Voltage from 100VAC to 600VAC
  • Rugged, double molded case
  • Suitable for outlets or against wire insulation testing
  • Red LED light indicator
  • Built-in bright flashlight with ON/OFF button

Extech DA30 Non-contact Adjustable AC Current Detector

Locates current in hidden wires and cables

The DA30 detects AC Current (200 mA to 1000 amps) through shielded wires, conduit, and metal circuit breaker or junction boxes with audible and visual indication. Sensitivity adjustment increases or reduces sensor trigger threshold. CAT III-600-volt, CE approved and UL Listed. Comes with pocket clip, four LR44 button batteries, and user guide.

  • Non-contact AC Current range is from 200mA to 1000A
  • Locates current flow even where voltage detectors cannot work
  • Detects through shielded wires, conduit, and metal circuit breaker or junction boxes
  • Sensitivity adjustment for locating wires/conduit through walls
  • Audible and visible indication

Extech DV23 Non-Contact Voltage Detector

Rugged CAT IV NCV with Visual and Audible Live Wires Indicator

Use DV23 to quickly check for the presence of live wires before performing any electrical testing. Suitable for outlets or against wire insulation testing, this AC Voltage Detector for non-contact detection of AC Voltage from 50 to 600V (50/60Hz). Red LED indicates the presence of voltage. Comes with two AAA batteries.

  • Non-Contact AC Voltage detection of AC Voltage from 50 to 600V, 50/60Hz
  • Audible and visual red LED light indicator
  • Convenient built-in pocket clip
  • Tip fits into AC outlets or against wire insulation testing
  • Complete with two AAA batteries

Extech DA50 Telescoping AC Current Detector

39'' (1m) Non-Contact current detector (up to 1000A)

The DA50 detects AC Current (200mA to 1000A) in shielded wires, wires behind walls, metal circuit breaker and junction boxes. Telescoping probe extends to reach distance of 39'' (1m). Comes with four LR44 button batteries and user guide.

  • Non-Contact Detection of AC Current from 200mA to 1000A
  • Ideal for use on shielded wires or conduit behind walls, metal circuit breaker or junction boxes
  • Telescoping probe extends to 36'' (0.9m) with reach distance of 39'' (1m)
  • For use on 50/60Hz circuits
  • Red LED light indicator and switch-controlled ON/OFF Audible beeper
  • Sensitivity adjustment increases or reduces sensor trigger threshold

Extech DV25 Dual-Range AC Voltage Detector with Flashlight

Pocket size Non-Contact Voltage Detector with two selectable ranges

Model DV25 is a dual range NCV detector that combines two models into one. Low range measures down to 24 Volt and the high range measures up to 1000 Volt. Audible and visual indication, rugged double molded housing, and a bright built-in LED flashlight. Complete with 2 x AAA batteries.

  • Non-contact detection of AC Voltage in 2 ranges:
    • 24 to 1000VAC
    • 100 to 1000VAC
  • For use on 50/60Hz circuits
  • Audible and Visual voltage indication
  • Built-in bright flashlight with On/Off button
  • Rugged double-molded housing
  • Tip fits into outlets or against wire insulation testing

Extech DV30 Non-Contact Adjustable AC Voltage Detector

Non-contact detection of AC Voltage with Sensitivity adjust

The DV30 is an NCV Detector with a sensitivity adjustment to pinpoint the Voltage source. AC Voltage detection from 12 Volt to 600 VAC; CAT III-600 Volt safety rating. Complete with four LR44 button batteries and pocket clip.

  • Non-Contact detection of AC Voltage from 12VAC to 600VAC
  • Sensitivity adjustment increases or reduces sensor trigger threshold
  • Audible and visible voltage indication
  • Self test function

Extech DVA30 Non-contact AC Voltage and Current Detector

Detects and pinpoints wide range Voltage and Current with Sensitivity adjust

The DVA30 is the only two-in-one current/voltage detector designed for electrical testing. It detects AC voltage from 12-Volt to 600V and AC current from 200 mA at 0.2 in. distance and at much greater distances for larger current flow up to 1000 Amps. Sensitivity adjustments increase or reduce sensor trigger threshold. Audible and visual indicators show the presence of current or voltage. It can be used to trace concealed wires in walls and floors, identify hot wires, trace current flow where voltage detection does not work (behind walls, in conduits, through concrete, or underground). The sensitivity is high enough to trip on low voltage HVAC or similar signal levels. Complete with four LR44 button batteries and pocket clip.

  • The only two-in-one current/voltage detector designed for electrical testing
  • Non-Contact AC Voltage detection from 12V to 600VAC
  • Non-Contact AC Current detection from 200mA to 1000A
  • Sensitivity adjustments to increase or reduce sensor trigger threshold
  • Current sensor detects current flow through shielded wires, conduit, and metal circuit breaker/junction boxes

Extech ET20 Voltage Tester

Compact size AC/DC Voltage Tester (100-250V AC/DC)

The ET20 is a Compact Dual Indicator Voltage Tester. 100 to 250V AC/DC volt detection. Probes snap on housing for easy one-hand operation.

  • Voltage detection range: 100 to 250V AC/DC
  • Probes snap on housing for easy one-hand operation
  • Large light indicators identify the presence of voltage

Extech ET20B Voltage Detector

Compact Size AC/DC Voltage Detector (100-250V AC/DC)

  • Voltage detection range: 100 to 250V AC/DC
  • Neon light Voltage indicator
  • Built-in test leads, pocket clip, and insulated housing

Extech ET23B Low Voltage Detector

Compact Size AC/DC Low Voltage Detector (5 to 50V AC/DC)

  • Voltage detection range: 5 to 50V AC/DC
  • Neon light Voltage indicator
  • Built-in alligator test lead clips, pocket clip, and insulated housing

Extech ET25 Voltage Tester

Compact size AC/DC Voltage Tester (80-250V AC/DC)

The ET25 is an AC/DC Neon Voltage Tester. Checks voltage from 80 to 250V AC/DC. Neon indicator glows if circuit is live. Featuring a pocket clip and insulated housing.
 

  • Voltage detection range: 80 to 250V AC/DC
  • Neon light voltage indicator
  • Built-in test leads
  • Pocket clip, insulated housing

Extech ET26B Voltage Tester

Compact Size AC/DC Voltage Tester (AC/DC: 120V and 240V; AC: 277V and 480V)

  • Detection: AC/DC: 120V and 240V; AC: 277V and 480V
  • Neon light Voltage indicator; Test lead clips
  • Built-in test leads, pocket clip, and insulated housing

Extech ET28B Voltage Tester

Compact Size Voltage Tester (AC: 120 to 480V; DC: 120 to 240V)

  • Detection: AC: 120V to 480V; DC: 120V to 240V
  • Neon light Voltage indicator
  • Test lead clip for easy one-handed operation
  • Built-in test leads with removable protective caps and 29'' (73.6cm) cable, and insulated housing

Extech ET30B Voltage Tester

Compact Size AC/DC Voltage Tester (6V, 12V, 24V)

  • Voltage detection range: AC/DC: 6V, 12V, 24V
  • Bright xenon light Voltage indicator
  • Built-in 40.5'' (103mm) stainless steel test probe with 5ft (1.5m) cable and insulated alligator clip
  • Operates without battery

Extech ET38 Voltage/Continuity Tester

Compact Size AC Voltage Tester (12 to 300V AC) and Continuity Tester

  • Voltage detection range: 12 to 300V AC
  • Continuity tester
  • LED light indicator
  • Includes built-in screwdriver tip, pocket clip, and two button batteries

Extech ET60 Voltage/Continuity Tester

7-Range AC/DC Voltage Tester with LED Indicators and NCV Detector

Easy-to-use Voltage Tester is designed with 7-range LED indicators that quickly shows the range of the AC and DC Voltage measured. The meter vibrates when Voltage is detected >85V. Its built-in Non-Contact Voltage Detector function easily detects live voltages from 90 to 1000V AC. The AC frequency bandwidth is from 45 to 66Hz. Functions include Continuity with audible and visual alert. Designed with a bright built-in flashlight and a rugged double molded housing with integrated test leads.

  • Measure Voltage (7-range LED indicators)
    • AC: 24V, 120V, 208V, 240V, 277V, 480V, 600V
    • DC: 6V, 12V, 24V, 36V, 48V, 110V, 220V
  • Vibration alert when Voltage is detected >85V
  • Non-Contact Voltage detection range: 90 to 1000V AC
  • AC frequency bandwidth: 45 to 66Hz
  • Continuity tester with audible and visual alert
  • Bright built-in flashlight
  • Double-molded housing
  • Complete with built-in test leads and two AAA batteries

Extech VT30 LCD Multifunction Voltage Tester

Voltage, Continuity and Phase Tester with Flashlight and backlit digital Display with bargraph

The VT30 is a voltage, continuity and phase tester with built in flashlight and backlit digital display with bar graph. The tester features a double molded IP64 housing, polarity detection with LEDs for positive and negative DC and a CAT III 600 Volt / CATIV 600 Volt safety rating. This product is complete with a one year warranty, 2 AAA batteries, protective cap, and pouch case.

  • Large backlit LCD display
  • AC voltage (0 to 480V) and DC voltage (0 to 690V)
  • Polarity detection with LEDs for positive and negative DC
  • Continuity Test with audible tone
  • Phase rotation test for motors
  • Two handed operation for low impedance testing
  • Built-in flashlight for testing in tight areas
  • Rubberized double-molded IP64 housing
  

Switch to Mobile Version