LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

PH and Conductivity Meters

PH/CONDUCTIVITY ELECTRODE FOR WQ120 - (WQ125)

The Triplett Model WQ125 is a combination flat surface pH electrode with a multi-range conductivity cell to measure pH, TDS, Conductivity, Salinity and Temperature. The flat surface electrode for pH can measure solids, semi-solids, and liquids.  It features ATC (Automatic Temperature Control) that compensates for temperature changes.  A RENEW warning when probe needs cleaning or replacement.

Features:

  • Measures pH, TDS, Conductivity, Salinity and Temperature
  • Flat surface electrode for pH can measure solids, semi-solids, and liquids
  • ATC (Automatic Temperature Control) compensates for temperature changes
  • RENEW warning when probe needs cleaning or replacement
  • Includes electrode with protective cap

CONDUCTIVITY/TDS/SALINITY PEN - (CD100)

The Triplett Model CD100 waterproof (IP57) Conductivity/TDS/Salinity Pen measures TDS, Conductivity, Salinity and Temperature. It simultaneously displays Conductivity, TDS, or Salinity and Temperature and has an analog bargraph for viewing trends. It features ATC (Automatic Temperature Control) that compensates for temperature changes, adjustable TDS compensation ratio, 1-, 2-, or 3-point Conductivity calibration, and a RENEW warning when probe needs cleaning or replacement. Additional features include the ability to store/recall 25 readings, a Hold function that ''freezes'' the reading on the display, and Auto power off (after 10 minutes) with disable conserves battery life.

Features:

  • Measures TDS, Conductivity, Salinity and Temperature
  • Multi-range conductivity cell
  • ATC (Automatic Temperature Control) compensates for temperature changes
  • Dual display for  Conductivity, TDS, or Salinity and Temperature plus analog bargraph for trends
  • Adjustable TDS compensation ratio
  • Store/recall 25 readings
  • Hold function ''freezes'' the reading on the display
  • 1-, 2-, or 3-point Conductivity calibration
  • RENEW warning when probe needs cleaning or replacement
  • Waterproof (IP57)
  • Includes meter electrode with protective cap, (4) CR2032 batteries, sample cup with cap, and neckstrap

WATERPROOF PH METER - (PH180)

The Triplett Model PH180 Waterproof (IP57) PH Pen measures from 0 to 14 pH with 0.01pH resolution and has flat surface electrode that can measure solids, semi-solids, and liquids.It simultaneously displays pH and Temperature and has an analog bargraph for viewing trends. It features ATC (Automatic Temperature Control) that compensates for temperature changes, 1-, 2-, or 3-point calibration, a CAL reminder after 15 on/off cycles, and a RENEW warning when the probe needs cleaning or replacement. Auto power off (after 10 minutes) with disable conserves battery life.

Features:

  • Flat surface electrode can measure solids, semi-solids, and liquids
  • Measures from 0 to 14 pH with 0.01pH resolution
  • ATC (Automatic Temperature Control) compensates for temperature changes
  • Dual display for pH and Temperature
  • Analog bargraph for viewing trends
  • 1-, 2-, or 3-point calibration
  • CAL reminder after 15 on/off cycles
  • RENEW warning when probe needs cleaning or replacement
  • Auto power off (after 10 minutes) with disable
  • Waterproof (IP57)
  • Includes meter with flat surface pH probe with protective cap, (4) CR2032 batteries, cup with cap, and neckstrap

PH/CONDUCTIVITY/TDS/SALINITY METER - (WQ120)

The Triplett Model WQ125 is a combination flat surface pH electrode with a multi-range conductivity cell to measure pH, TDS, Conductivity, Salinity and Temperature. The flat surface electrode for pH can measure solids, semi-solids, and liquids.  It features ATC (Automatic Temperature Control) that compensates for temperature changes.  A RENEW warning when probe needs cleaning or replacement. 

Features:

  • Measures pH, TDS, Conductivity, Salinity and Temperature
  • Flat surface electrode for pH can measure solids, semi-solids, and liquids
  • ATC (Automatic Temperature Control) compensates for temperature changes
  • RENEW warning when probe needs cleaning or replacement
  • Includes electrode with protective cap
 

Switch to Mobile Version