Methane Sensor and Monitoring System

Benefits

• Protects life, property and company profits
• Ideal for remote locations
• Fail safe mode in event of loss of power
• Up to three (3) sensors can be installed to main control to meet space coverage requirements

Features

• Universal power inputs: 110/220 Vac and/or 12–48 Vdc input
• Strobe light for visual alerts
• Sensor status indicator LEDs on the main control
• Modular design for optimal placement of sensor(s)

Installation

• Wall or 2-gang junction box mountable
• Mechanical relays are easily accessible:
  • Warning 25% relay, 15 A @ 120 Vac; 10 A @ 277 Vac; 10 A @ 28 Vdc
  • Alarm 50% relay, 0.5 A resistive @ 28 Vdc, 0.5 A @ 125 Vac
• Redundant power supply capability; dual AC and/or DC power supply connections (DC power supply will operate as backup power source)
• Indicator LEDs can be tested by pushing the red “TEST” button
• Sensors can be tested in the field with the P/N CH4-TESTKIT

Detector can operate exhaust fans and building alarms / SCADA systems:

Warning Settings: Should the concentration of methane gas in the air surrounding the sensor reach 25%LEL by volume, the “25%LEL Warning” yellow LED will light up on the main control of the unit. In addition, the 25%LEL internal relay will energize and can be used to activate an external exhaust fan.

Alarm Settings: Should the methane gas concentration reach 50%LEL by volume, the “50% Alarm” red LED will light up, the strobe will flash and an audible alarm will sound. In addition, the 50%LEL internal relay will energize and can be used to activate a building management/alarm system (via SCADA/Modbus).

SBS-CH4 Includes

• Main unit
• Methane sensor
• 25 ft. cable

Butane / Isobutane Sensor and Monitoring System

Benefits

• Protects life, property and company profits
• Ideal for remote locations
• Fail safe mode in event of loss of power
• Up to three (3) sensors can be installed to main control to meet space coverage requirements

Features

• Universal power inputs: 110/220 Vac and/or 12–48 Vdc input
• Strobe light for visual alerts
• Sensor status indicator LEDs on the main control
• Modular design for optimal placement of sensor(s)

Installation

• Wall or 2-gang junction box mountable
• Mechanical relays are easily accessible:
  • Warning 25% relay, 15 A @ 120 Vac; 10 A @ 277 Vac; 10 A @ 28 Vdc
  • Alarm 50% relay, 0.5 A resistive @ 28 Vdc, 0.5 A @ 125 Vac
• Redundant power supply capability; dual AC and/or DC power supply connections (DC power supply will operate as backup power source)
• Indicator LEDs can be tested by pushing the red “TEST” button
• Sensors can be tested in the field with the P/N C4H10-TESTKIT

Detector can operate exhaust fans and building alarms / SCADA systems:

Warning Settings: Should the concentration of butane / isobutane gas in the air surrounding the sensor reach 25%LEL by volume, the “25%LEL Warning” yellow LED will light up on the main control of the unit. In addition, the 25%LEL internal relay will energize and can be used to activate an external exhaust fan.

Alarm Settings: Should the butane / isobutane gas concentration reach 50%LEL by volume, the “50% Alarm” red LED will light up, the strobe will flash and an audible alarm will sound. In addition, the 50%LEL internal relay will energize and can be used to activate a building management/alarm system (via SCADA/Modbus).

SBS-C4H10 Includes

• Main unit
• Butane / Isobutane sensor
• 25 ft. cable

Benefits

• Protects life, property and company profits
• Ideal for remote locations
• Fail safe mode in event of loss of power
• Up to three (3) sensors can be installed to main control to meet space coverage requirements

Features

• Universal power inputs: 110/220 Vac and/or 12–48 Vdc input
• Strobe light for visual alerts
• Sensor status indicator LEDs on the main control
• Modular design for optimal placement of sensor(s)

Installation

• Wall or 2-gang junction box mountable
• Mechanical relays are easily accessible:
  • Warning 25% relay, 15 A @ 120 Vac; 10 A @ 277 Vac; 10 A @ 28 Vdc
  • Alarm 50% relay, 0.5 A resistive @ 28 Vdc, 0.5 A @ 125 Vac
• Redundant power supply capability; dual AC and/or DC power supply connections (DC power supply will operate as backup power source)
• Indicator LEDs can be tested by pushing the red “TEST” button
• Sensors can be tested in the field with the P/N C3H8-TESTKIT

Detector can operate exhaust fans and building alarms / SCADA systems:

Warning Settings: Should the concentration of propane gas in the air surrounding the sensor reach 25%LEL by volume, the “25%LEL Warning” yellow LED will light up on the main control of the unit. In addition, the 25%LEL internal relay will energize and can be used to activate an external exhaust fan.

Alarm Settings: Should the propane gas concentration reach 50%LEL by volume, the “50% Alarm” red LED will light up, the strobe will flash and an audible alarm will sound. In addition, the 50%LEL internal relay will energize and can be used to activate a building management/alarm system (via SCADA/Modbus).

SBS-C3H8 Includes

• Main unit
• Propane sensor
• 25 ft. cable

Hydrogen Sensor and Monitoring System

Benefits

• Protects life, property and company profits
• Ideal for remote locations
• Fail safe mode in event of loss of power
• Up to three (3) sensors can be installed to main control to meet space coverage requirements

Features

• Universal power inputs: 110/220 Vac and/or 12–48 Vdc input
• Strobe light for visual alerts
• Sensor status indicator LEDs on the main control
• Modular design for optimal placement of sensor(s)
• NRTL/C Certified: UL Std. No 61010-1 & CAN/CSA-C22.2 No. 61010-1-12
• UFC 3-520-05, January 2020

Installation

• Wall or 2-gang junction box mountable
• Mechanical relays are easily accessible:
  • Warning 0.5 % relay, 15 A @ 120 Vac; 10 A @ 277 Vac; 10 A @ 28 Vdc
  • Alarm 1% relay, 0.5 A resistive @ 28 Vdc, 0.5 A @ 125 Vac
• Redundant power supply capability; dual AC and/or DC power supply connections (DC power supply will operate as backup power source)
• Indicator LEDs can be tested by pushing the red “TEST” button
• Sensors can be tested in the field with the P/N H2-TESTKIT

Detector can operate exhaust fans and building alarms / SCADA systems:

Warning Settings: Should the concentration of hydrogen gas in the air surrounding the sensor reach 0.5% by volume, the “0.5% Warning” yellow LED will light up on the main control of the unit. In addition, the 0.5% internal relay will energize and can be used to activate an external exhaust fan or a building management/alarm system (via SCADA Modbus).

Alarm Settings: Should the hydrogen gas concentration reach 1% by volume, the “1% Alarm” red LED will light up, the strobe will flash and an audible alarm will sound. In addition, the 1% internal relay will energize and can be used to activate a building management/alarm system (via SCADA/Modbus).

SBS-H2-DoD Includes

• Main unit
• Hydrogen sensor
• 25 ft. cable

Hydrogen Sensor and Monitoring System

The SBS-H2 Hydrogen Detector is a hydrogen detection system with visual and audible alarms and 1% and 2% hydrogen relays.

The system comes complete with the main control, a highly accurate hydrogen gas sensor and a 25 ft. cable. This unit can be powered with AC and/or DC power and can be mounted directly to a wall or to an electrical box, making it extremely versatile and very user-friendly.

The SBS-H2 includes relays for remote connection to alarm/monitoring systems and for control of external relays for an exhaust fan.
 

Applications

• Substations
• Battery rooms
• Uninterruptible power supply (UPS)
• Battery cabinet systems
• Battery charging areas
• Hydrogen fueled back-up power systems