LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

Clamp Meters

1 - 24 of 44

Extech TL740 Industrial Plunger Style Test Clip Set

Spring loaded clip with steel jaws

The Extech TL740 Industrial Plunger Style Test Clip Set includes a spring loaded clip with steel jaws. It has a jaw opening of 0.6 inches and an overall length of 6.1 inches. This test clip set is rated at 1000V, 10A and CAT III-1000V.

  • 1000V, 10A
  • 0.6'' (15mm) jaw opening
  • 6.1'' (155mm) overall length

Extech TL708 Heavy Duty Large Alligator Clips

Toothed jaws for solid gripping of fine wires

The Extech TL708 Alligator Clip Set has toothed jaws for the solid gripping of fine wires. They are heavy duty alligator clips with a 1000V, 6A CAT IV-600V and CAT III-1000V safety rating. Each have a one inch jaw length and a 1.6 inch jaw opening. The overall length of these alligator clips is 4.2 inches.

  • 1000V, 6A
  • 1'' (26mm) jaw length
  • 1.6''(40mm) jaw opening
  • 4.2'' (107mm) overall length

Extech TL900 SafeSense™ CAT IV Fused Test Leads

Detects the Presence of Voltage Even With a Blown Fuse for Increased Safety

The TL900 is Extech's UL approved test leads with Safe Sense technology that senses the presence of voltage even with a blown fuse for increased user safety. Standard shrouded banana-to-banana plug connectors fit most multimeter input jacks. Dual layer silicone construction with wear indication. Built-in fuse is replaceable. CAT IV-600V, CAT III-1000V, 10A with protective safety cap.

  • Intelligent SafeSense™ technology makes it easy for user to know if voltage is present on target area being measured, even with a blown fuse, for increased safety
  • Two dual-layered silicone test lead cables (5.3ft/1.6m long) with wear indication construction
  • Standard 90° shrouded banana-to-banana plug connectors fit most multimeter input jacks
  • Two CAT IV probes have built-in replaceable fuses (1000V, 11A, 20kA breaking capacity)
  • CAT IV-600V, CAT III-1000V, 10A with protective safety cap
  • Each probe has 2mm probe tip and includes a 4mm brass caged bayonet threaded tip (removable) for connecting accessories

For complete specs please download the product datasheet (not available for some accessories)

Extech TL841 Test Lead Kit

16-piece kit with multiple test lead tip configuration

The Extech TL841 Test Lead Kit is a test lead set with straight probes that are CAT III-1000V rated with a capacity of 16A. This kit comes with an alligator clip set with a CAT III-300V rating and a capacity of 5A. Includes the TL743 slim reach test probe set and the spade lugs which have a 0.16 inch (4mm) opening, 30VAC/60VDC and a capacity of 5A. This kit also includes the test leads, right angle, straight end and CAT III-1000V rated with a capacity of 16A. Comes with the hook tips, pincer tip and couplers and is conveniently stored in a pouch case.

  • Test Lead Set with Straight Probes, CAT III-1000V, 16A
  • Alligator Clip Set, 5A, CAT III-300V
  • TL743 - Slim Reach Test Probe Set
  • Spade Lugs, 0.16'' (4mm) opening, 30VAC/60VDC, 5A
  • Test Leads, Right Angle, Straight End, CAT III-1000V, 16A
  • Test Leads with Hook Tip, Pincer Tip, and Couplers
  • Conveniently stored in a pouch case

Extech TL833 Industrial Test Lead Set

11-piece kit with CAT III-1000V rating

The Extech TL833 Industrial Test Lead Set is a 12 piece kit with a CAT III-1000V rating. This set includes the TL726 double molded silicone test leads, the TL740 industrial plunger style test clips and the TL741 heavy duty plunger style hook clip set. Set also includes the TL708 alligator clip set, the TL743 slim reach test probe set and the TP873 type k bead probe with banana adaptor. The Extech TL833 Industrial Test Lead Set is conveniently stored in a pouch case which helps keep it organized and safe.

  • TL726 - Double Molded Silicone Test Leads
  • TL740 - Industrial Plunger Style Test Clips
  • TL741 - Heavy Duty Plunger Style Hook Clip Set
  • TL708 - Large Alligator Clip Set
  • TL743 - Slim Reach Test Probe Set
  • Type K Bead Probe with Banana Plug
  • Conveniently stored in a pouch case

Extech TL831 Master Electrical Test Lead Kit

12-piece kit industrial grade test leads

The Extech TL831 Master Electrical Test Lead Kit is an industrial grade ten piece kit. This kit includes the TL726 double molded silicone test leads, the TL747 electronic sharp test probe set and the TL741 heavy duty plunger style hook clip set. This kit also includes the TL742 heavy duty plunger style pincer grip set, the TL740 industrial plunger style test clips and the TL708 large alligator clip set. The Extech TL831 Master Electrical Test Lead Kit is conveniently stored in a pouch case.

  • TL726 - Double Molded Silicone Test Leads
  • TL747 - Electronic Sharp Test Probe Set
  • TL741 - Heavy Duty Plunger Style Hook Clip Set
  • TL742 - Heavy Duty Plunger Style Pincer Grip Set
  • TL740 - Industrial Plunger Style Test Clips
  • TL709 - Medium Alligator Clip Set
  • Conveniently stored in a pouch case

Extech TL810 Electrical Test Lead Kit

8-piece double insulated test lead kit ideal for electrical applications

The Extech TL810 Electrical Test Lead Kit is double insulated with a CAT III-1000V rating for your protection. The eight piece electrical test lead includes two 40 inch PVC lead extensions with shrouded banana plugs on each end. It includes two very sharp, extra long 0.3 inch stainless steel tipped plug on test probes and two stainless steel flat tip test probes. Also, this kit includes two plunger activated retractable jaw clips with a wide 0.75 inch jaw opening.

  • Two 40'' (1m) PVC lead extensions (1000V rating) with shrouded banana plugs on both ends
  • Two very sharp, extra long 0.75'' (19mm) stainless steel tipped plug-on test probes
  • Two stainless steel flat tip test probes (0.6''/15mm long)
  • Two plunger activated retractable jaw clips with a wide 0.75'' (19mm) jaw opening

Extech TL809 Electronic Test Lead Kit

8-piece test lead kit ideal for the testing of digital circuitry

The TL809 is an 8-piece Professional Test Lead Kit. Includes 3-compartment sealable nylon pouch to organize/protect your test leads. Has a CAT III 1000V safety rating.

  • Two 42'' (1m) PVC lead extensions with shrouded banana plugs at both ends
  • Two modular 4'' (102mm) Heavy Duty test probe handles with 0.16'' (4mm) banana plug tip
  • Two plunger mini-hooks
  • Two alligator clips with removable insulators
  • Includes 3-compartment sealable nylon pouch to organize/protect your test leads

Extech TL808-KIT Professional Test Lead Kit

8-piece Kit with CATIII-1000V safety rating and carrying case

The TL808-KIT is an 8-piece Professional Test Lead Kit. Includes large carrying case with wrist strap that provides storage for the kit and additional space for your meter. Comes with CATIII-1000V safety rating and carrying case.

  • Two 42'' (1m) PVC lead extensions with shrouded banana plugs at both ends
  • Two modular 4'' (102mm) Heavy Duty test probe handles with 0.16'' (4mm) banana plug tips
  • Two standard size alligator clips with insulated rubber boot
  • Two extra large, double-insulated alligator clips with sharp teeth for piercing insulated wires - jaw opens 0.8'' (20mm)
  • Includes carrying case provides storage for the kit and additional space to hold your meter

Extech TL807C Insulated Alligator Clips

Push-on alligator clips for standard test leads

The TL807C is a set of insulated alligator clips. These insulated alligator clips are for use with Extech TL803 Test Leads. The TL807C alligator clips are durable test clips, which come with a six month warranty.

  • Insulated with rubber boot
  • Push-on mount
  • Compatible with standard test leads (TL803 or TL805)

Extech TL806 Double Insulated Alligator Clips

Large double insulated alligator clips with sharp teeth

The TL806 is a set of double insulated alligator clips for use with Extech TL809 or TL810 test leads. CAT III-1000V safety rating. Comes with a 6 month warranty.

Double Insulated Alligator Clips Features

 

  • Extra large alligator clips mate with banana plug patch cords
  • Jaw opens up to 0.8'' (20mm)
  • Sharp teeth for piercing insulated wire
  • One end features a 0.16'' (4mm) safety jack
  • Complies with the IEC1010 standard
For complete specs please download the product datasheet (not available for some accessories)
 

Extech TL805 Double Injected Test Leads

Double molded test leads with non-slip comfort grip

The Extech TL805 Double Injected Test Leads have a non-slip comfort grip. These are professional grade test leads which are compatible with most multimeters. They have double coated PVC lead wire with a white inner layer which makes it easily to identify damaged leads.

  • Professional grade test leads compatible with most multimeters
  • Double coated PVC lead wire with white inner layer to easily identify damaged leads
  • Heavy duty chromium plated brass tips, 0.16'' (4mm) long with removable category control tip covers
  • Shrouded, non-twist banana plugs for reduced socket wear
  • Superflex molded strain reliefs for improved cable flexibility
  • D-shaped finger guards allow easy access to narrowly spaced test points

Extech TL803 General Purpose Test Leads

Standard test leads with protective tip caps

The Extech TL803 Standard Test Leads have protective tip covers for safety during storage. Standard replacement test leads with shrouded banana connectors and molded strain reliefs. Compatible with most multimeters. The Extech TL803 Standard Test Leads have a 10A capacity and are rated at CAT III-1000V and are UL Listed.

  • Standard replacement test leads compatible with most multimeters
  • Shrouded banana connectors, molded strain reliefs
  • Two sharp 0.16'' (4mm) long tips with removable category control tip covers for safe storage

Extech TL747 Electronic Sharp Test Probe Set

For use on high density components and boards and for piercing insulation

The Extech TL747 Electronic Sharp Test Probe Set is for use on high density components and boards and for piercing through insulation. It has a 0.35 inch long tip and a 0.08 inch diameter. This test probe set has an overall length of 4 inches. Set is rated at CAT III-1000V.

  • 1000V, 6A max
  • 0.35'' (9mm) long tip with sharp 0.08'' (2mm) diameter
  • 4'' (102mm) overall length

Extech TL744 Flat Blade Test Probe Set

Designed to fit outlet receptacles

The Extech TL744 Flat Blade Test Probe Set has been designed to fit outlet receptacles. Probes are 0.7 inches long with a 0.1 inch flat tip. These test probes have an overall length of 4.9 inches. Set is rated at 1000V, 10A, CAT IV-600C and CAT III-1000V.

  • 1000V, 10A
  • 0.7'' (17mm) long x 0.1'' (2.5mm) flat tip
  • 4.9'' (124mm) overall length

Extech CA500 Medium Carrying Case

Soft vinyl carrying case (6.7 x 3.8 x 2.3'') with shoulder strap and side pockets

The CA500 is a protective medium sized vinyl carrying case. Protects meters and accessories from dirt and debris. Comes with a 6 month warranty. The CA500 is versatile and features a belt loop and shoulder strap.

  • Size: 6.7 x 3.8 x 2.3'' (170 x 97 x 58mm)

Extech CA3018 3000A AC Flex Clamp-on Adaptor

18'' Flexible Clamp Adaptor for Multimeters/Clamp-On Meters

The CA3018 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3018 is an 18 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating.

  • Measure AC Current up to 3000A
  • Flexible 18'' (45.7cm) clamp jaw easily wraps around bus bars and cable bundles
  • 7.5mm cable diameter fits into tight spaces and around large conductors
  • Measures AC Current in three ranges
  • Easy twist clamp cable closure to Lock or Open
  • Compatible with most multimeters and clamp meters with standard sized banana plug inputs
  • Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs, and two AAA batteries

Extech CA3010 3000A AC Flex Clamp-on Adaptor

10'' Flexible Clamp Adaptor for Multimeters/Clamp-On Meters

The CA3010 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3010 is a 10 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating.

  • Measure AC Current up to 3000A
  • Flexible 10'' (25.4cm) clamp jaw easily wraps around bus bars and cable bundles
  • 7.5mm cable diameter fits into tight spaces and around large conductors
  • Measures AC Current in three ranges
  • Easy twist clamp cable closure to Lock or Open
  • Compatible with most multimeters and clamp meters with standard sized banana plug inputs
  • Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs, and two AAA batteries

Extech 480172 AC Line Splitter

Allows clamp meter to measure AC Current on a 2-wire or 3-wire power cord

This Extech 480172 Line Splitter provides a fast and easy way to “open” standard 120 Volt AC electrical lines, eliminating the need to cut off the plug and separate the conductors. When connected between a 120 Volt AC outlet and a device under test, this splitter separates the hot/live conductor from the neutral and ground, which enables users to measure AC current up to 15 Amp on a two-wire or three-wire lines using a clamp meter. This splitter also features two Voltage Test jacks so that voltage can be measured using a multimeter.

  • Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
  • Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
  • Also features voltage check function

Extech MA63 60A True RMS AC/DC Clamp Meter + NCV

Compact Clamp Meter with Non-Contact Voltage Detector and Variable Frequency Control

The MA63 is an AC/DC current clamp with NCV voltage detector and full overload protection. Manual ranging clamp meter with three Current ranges and AC/DC voltage to 600V. The 6000mA range allows for low current measurements that may be used in the automotive industry. Unique VFC (variable frequency control) mode helps troubleshoot and diagnose HVAC applications that are variable frequency driven. The MA63 also features resistance, capacitance, frequency, diode and continuity measurements as well as data hold low battery indicator, and auto power off functions. Complete with test leads, carrying case, and two AAA batteries.
 

  • True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
  • 0.7'' (17mm) jaw size allows measurements in tight locations
  • 6000 count backlit LCD display
  • Built-in non-contact voltage detector (NCV) with LED indicator
  • Variable Frequency Control (VFC): Low pass filter for accurate measurements of variable frequency drive signals
  • Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Diode Test, Continuity
  • Full range overload protection
  • Data Hold, Low Battery indicator, Auto Power Off
  • Complete with test leads, 2 AAA batteries and carrying case

Extech MA1500 1500A True RMS AC/DC Clamp Meter + NCV

Integrated Non-Contact Voltage Detector

The MA1500 is a 1500A True RMS AC/DC Clamp Meter. 2.0 in. (52mm) jaw size for conductors up to 500MCM with True RMS for accurate readings of non-sinusoidal waveforms. Additional features include: Relative Mode for Capacitance Zero and Offset Adjustment, Data Hold, Peak Hold, MIN/MAX, Auto Power Off, and Inrush function to capture transients during motor startup. Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying case.

  • True RMS for accurate readings of non-sinusoidal waveforms
  • Built-in non-contact Voltage detector with LED alert
  • 2.0'' (52mm) jaw size for conductors up to 500MCM
  • Dual 40,000/4000 count, backlit LCD display
  • Includes Multimeter and Type K Temperature functions
  • Inrush function captures transients during motor startups
  • Relative Mode for Capacitance Zero and Offset Adjustment
  • Data Hold, Peak Hold, MIN/MAX, and Auto Power Off
  • Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying case

Extech MA145 True RMS 300A AC/DC Clamp Meter

Compact AC/DC Clamp Meter with NCV Detector

The MA145 is a Compact AC/DC Clamp Meter with NCV Detector. This Clamp meter takes True RMS measurements for accurate readings of noisy, distorted or non-sinusoidal waveforms. The MA145 can measure up to 300A AC and DC. Complete with carrying case and two LR44 batteries. UL listed with a CAT III 600V safety rating.

  • True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
  • Compact 0.8'' (22mm) jaw size accommodates conductors up to 300MCM and allows measurements in tight locations
  • Zero function for accurate DC measurements
  • Unique Smart Auto Sense feature
  • Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
  • Built-in Non-Contact Voltage (NCV) detector for quick detection of live voltage
  • Inrush current measurement
  • 6000 count backlit LCD display
  • Smart Data Hold: Audiovisual alert when a new reading exceeds 50 digits of a held reading
  • Low battery indicator and Auto Power Off feature
  • Complete with carrying case and two LR44 batteries

Extech MA120 200A AC/DC Mini Clamp Meter+Voltage Detector

Clamp meter with built-in AC Voltage detector and flashlight

The MA120 is a 200 Amp AC/DC mini clamp meter with built-in AC voltage detector and built in LED flashlight. The meter measures Frequency up to 1 kHz with 0.01Hz resolution, auto ranges with auto power off and data hold functions. Complete with a year warranty, 2 AAA batteries and soft case.

  • Measures 200A AC Current up to 100mA resolution
  • 3% basic ACA accuracy
  • 0.7'' (18mm) jaw opening; 300MCM cable size
  • 2000 count LCD display
  • Non-contact AC Voltage detector (120/240VAC, 50/60Hz) via clamp tip
  • Built-in white LED flashlight
  • Measures Frequency up to 1kHz with 0.01Hz resolution
  • Autoranging with Auto Power Off and Data hold function

Extech MA610 600A AC Clamp Meter + NCV

Compact AC Clamp Meter with Non-Contact Voltage Detector and Multimeter Functions

The MA610 is a fully loaded clamp meter with multimeter functions including AC Current, AC/DC Voltage, Resistance, Frequency, and Capacitance. It also has a built-in non-contact voltage (NCV) detector to quickly check circuits and wires for live voltages. It’s a pocket-sized meter with 1.2'' (30mm) jaw that fits conductors up to 500MCM and is designed with a large backlit LCD display to view in dimly lit area.

  • Pocket-sized meter with 1.2'' (30mm) jaw size fits conductors up to 500MCM
  • Built-in Non-Contact Voltage (NCV) detector
  • MultiMeter functions include Resistance, Capacitance and Frequency
  • Relative Mode for Capacitance
  • Data Hold freezes reading on display
  • Auto Power Off with disable and Low Battery indication
  • Large backlit LCD display
  • Complete with test leads, three AAA batteries, and pouch
 
1 - 24 of 44

Switch to Mobile Version