LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

General Lab Equipment

Lab Jack 19086-000 (Micro 3"X3")

Boekel extends our size offering for our Lab Jack product line. We now offer three new sizes to our existing product line. All stainless steel screw mechanism and anodized aluminum top and bottom plates. Three sizes have a pre-tapped hole to accommodate an optional support rod. The Giant size, 19090-005B has a side locking knob for the platform.

Note: Lab Jack and Lab-Jacks are registered trademarks of Boekel Industries, Inc.

Lab Jack 19090-002B (Small, 4"X4")

19090-002B (Small, 4''x4'')

Lab Jack 19090-003B (6"X6")

19090-003B (6''x6'')

Lab Jack 19089-000 (W/ Plate & Rod, 8"X8")

19089-000 (w/ Plate & Rod, 8''x8'')

Lab Jack 19090-004B (Large, 8"X8")

19090-004B (Large, 8''x8'')

Lab Jack 19090-005B (Extra Large, 12"X12")

19090-005B (Large, 12''x12'')

Microplate Replicators

  • Pins are made of stainless steel for durability, autoclaving and flame sterilization
  • Economical substitute for expensive robotics systems
  • Models 140500 and 140501 include an alcohol reservoir and cleaning pads for debris removal

Applications

  • Transfer small volumes of inoculum from microplates to daughter plates or membranes
  • Replication of YACs and cosmid libraries
  • Colony hybridization
  • Antibiotic sensitivity testing
  • Phage typing

27134001 (Centistroke Range 18-56)

Crucible Tongs Model 1575

  • For holding crucibles 3.8 cm (11⁄2'') diameter or wider
  • Tight gripping corrugated tips for handling dishes in muffle furnaces
  • Made from nickel plated steel rod 0.8 cm diameter
  • Length: 50.8 cm (20'')

Hand Centrifuge Model 1160-2-15

  • Designed for field use in the determination of basic sediment and water in crude oil
  • Speeds up to 2000 RPM
  • 16: 1 gear ratio
  • Wide sweep cast aluminum crank has a spring clutch which assures effortless and safe start up and stopping.
  • Portable and lightweight
  • Rugged
  • Supplied with centrifuge head that holds 2 x 15 ml tubes, two aluminum shields, one each 15 ml glass plain and graduated tube

Zahn Cup Viscometers

  • Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil.
  • Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less.
  • Five cups are available differing only in the size of the orifice
  • Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes
  • Cup volume is 44 ml
  • Compact and easy to use
  • Rapid results
  • Inexpensive

27134002 (Centistroke Range 40-230)

Crucible Tongs Model 1575

  • For holding crucibles 3.8 cm (11⁄2'') diameter or wider
  • Tight gripping corrugated tips for handling dishes in muffle furnaces
  • Made from nickel plated steel rod 0.8 cm diameter
  • Length: 50.8 cm (20'')

Hand Centrifuge Model 1160-2-15

  • Designed for field use in the determination of basic sediment and water in crude oil
  • Speeds up to 2000 RPM
  • 16: 1 gear ratio
  • Wide sweep cast aluminum crank has a spring clutch which assures effortless and safe start up and stopping.
  • Portable and lightweight
  • Rugged
  • Supplied with centrifuge head that holds 2 x 15 ml tubes, two aluminum shields, one each 15 ml glass plain and graduated tube

Zahn Cup Viscometers

  • Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil.
  • Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less.
  • Five cups are available differing only in the size of the orifice
  • Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes
  • Cup volume is 44 ml
  • Compact and easy to use
  • Rapid results
  • Inexpensive
 

27134003 (Centistroke Range 150-790)

Crucible Tongs Model 1575

  • For holding crucibles 3.8 cm (11⁄2'') diameter or wider
  • Tight gripping corrugated tips for handling dishes in muffle furnaces
  • Made from nickel plated steel rod 0.8 cm diameter
  • Length: 50.8 cm (20'')

Hand Centrifuge Model 1160-2-15

  • Designed for field use in the determination of basic sediment and water in crude oil
  • Speeds up to 2000 RPM
  • 16: 1 gear ratio
  • Wide sweep cast aluminum crank has a spring clutch which assures effortless and safe start up and stopping.
  • Portable and lightweight
  • Rugged
  • Supplied with centrifuge head that holds 2 x 15 ml tubes, two aluminum shields, one each 15 ml glass plain and graduated tube

Zahn Cup Viscometers

  • Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil.
  • Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less.
  • Five cups are available differing only in the size of the orifice
  • Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes
  • Cup volume is 44 ml
  • Compact and easy to use
  • Rapid results
  • Inexpensive

27134004 (Centistroke Range 220-1100)

Crucible Tongs Model 1575

  • For holding crucibles 3.8 cm (11⁄2'') diameter or wider
  • Tight gripping corrugated tips for handling dishes in muffle furnaces
  • Made from nickel plated steel rod 0.8 cm diameter
  • Length: 50.8 cm (20'')

Hand Centrifuge Model 1160-2-15

  • Designed for field use in the determination of basic sediment and water in crude oil
  • Speeds up to 2000 RPM
  • 16: 1 gear ratio
  • Wide sweep cast aluminum crank has a spring clutch which assures effortless and safe start up and stopping.
  • Portable and lightweight
  • Rugged
  • Supplied with centrifuge head that holds 2 x 15 ml tubes, two aluminum shields, one each 15 ml glass plain and graduated tube

Zahn Cup Viscometers

  • Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil.
  • Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less.
  • Five cups are available differing only in the size of the orifice
  • Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes
  • Cup volume is 44 ml
  • Compact and easy to use
  • Rapid results
  • Inexpensive

27134005 (Centistroke Range 460-1725+)

Crucible Tongs Model 1575

  • For holding crucibles 3.8 cm (11⁄2'') diameter or wider
  • Tight gripping corrugated tips for handling dishes in muffle furnaces
  • Made from nickel plated steel rod 0.8 cm diameter
  • Length: 50.8 cm (20'')

Hand Centrifuge Model 1160-2-15

  • Designed for field use in the determination of basic sediment and water in crude oil
  • Speeds up to 2000 RPM
  • 16: 1 gear ratio
  • Wide sweep cast aluminum crank has a spring clutch which assures effortless and safe start up and stopping.
  • Portable and lightweight
  • Rugged
  • Supplied with centrifuge head that holds 2 x 15 ml tubes, two aluminum shields, one each 15 ml glass plain and graduated tube

Zahn Cup Viscometers

  • Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil.
  • Boekel cup type viscometers measure viscosity in the 18 to 1725 centistokes range in 90 seconds or less.
  • Five cups are available differing only in the size of the orifice
  • Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes
  • Cup volume is 44 ml
  • Compact and easy to use
  • Rapid results
  • Inexpensive

Boekel Scientific Laboratory Pipette Dryer (115V)

  • Vented top and base provide continuous flow of air through drying chamber
  • Pipettes dry in approximately one hour
  • Used with Stainless Steel Pipette Holder (13741⁄2 not included)
  • Complete with neon pilot light, toggle switch and grounded plug

Boekel Scientific Laboratory Pipette Washer And Dryer 115V

Pipet Washer Dryer Model 137100

  • Combines the essential features of Pipette Washer and Pipette Dryer
  • No need to move wet pipettes from one apparatus to another
  • Safety air gap eliminates risk of back-flow of contaminated water
  • Processes up to 200 pipets 7mm diameter by 375mm long
  • Supplied with Stainless Steel Pipette Holder (Model 13741⁄2)
  

Switch to Mobile Version