LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

Moisture Meters

1 - 24 of 31

Extech MO210 Pocket Moisture Meter

Dual Measurement Scale LCD Display with Bargraph

This Pocket Moisture Meter from Extech allows you to quickly assess whether wood and other porous materials have endured any water incursion. Simply push the sharply pointed electrode pins into the surface of sheetrock, drywall, wallboard, concrete, mortar, plaster or other building materials and the device will detect moisture levels between 0.2% to 2.4%. Slide the material-selection switch to wood and the handheld meter will determine moisture presence in timber from 6% to 44%. Complete with protective cap, replacement pins, and three CR-2032 button batteries.

  • Use on wall board, sheet rock, cardboard, plaster, concrete, and mortar
  • Replaceable threaded measurement electrode pins
  • Self-contained, pocket sized meter with belt clip

Extech MO220 Wood Moisture Meter

Integral pins and remote hand-press probe

The MO220 is specifically designed for monitoring moisture in wood. Memory contains 8 wood groups with calibrations for approx. 170 species of wood. Measurements can be taken using the integral pin electrodes or the included heavy duty remote probe. Automatically temperature compensated (ATC) readings when used with the temperature probe. Built-in calibration check, replaceable measurement electrode pins, user settable Auto Power off (1 to 9 minutes) with disable, and Low battery indication. Complete with protective cap, temperature probe, heavy duty remote moisture probe, replacement pins, two AAA batteries, and soft case.

  • Monitor moisture in wood and other building materials
  • Measure directly with the built-in moisture pins or use remote hand-press probe on hard surfaces
  • Memory contains 8 wood groups with calibrations for approximately 170 species of wood
  • Designed in a rugged double molded housing construction and is pocket sized for one-handed operation

Extech MO230 Pocket Moisture Meter

Compact size, pin moisture meter with large LCD

This large dual graphical LCD displays moisture in wood and other building materials plus Air Temperature and Relative Humidity. Unique LCD with analog bargraph for simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, minimum/maximum moisture values, and programmable wet/dry indication. Use on wood, paper, wallboard, sheet rock, cardboard, plaster, concrete, and mortar. Memory contains 3 wood groups and four building material groups with calibrations for approximately 150 species of wood and 19 building material types. Index Mode with programmable high and low values that can be used to quickly locate moisture with comparative measurement. Replaceable threaded electrode pins, impact proof housing, Auto power off conserves battery energy, built-in battery check and measurement verification test. Complete with protective cap, replacement pins, and three CR-2032 button batteries

  • Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
  • Digital LCD readout with analog bargraph and numerical displays
  • Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
  • Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar
  • Memory contains 3 wood groups and 4 building material groups with calibrations for approximately 150 species of wood and 19 building material types
  • Index Mode with programmable high and low values can be used to quickly locate moisture with comparative measurement
  • Replaceable threaded measurement electrode pins
  • Impact proof housing
  • Auto power off conserves battery energy
  • Built-in battery check and measurement verification test
  • Complete with protective cap, replacement pins, and three CR-2032 button batteries

Extech MO50 Moisture Meter

Compact Pin Moisture Meter

The MO50 is a compact pin moisture meter. MO50 displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete and mortar. This product is complete with pins (installed on meter), protective cap, and 9V battery.
 

  • Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
  • Audible Alert - tone rate beeps faster as the moisture level increases
  • Icons display low, medium and high levels of moisture content
  • Easy-to-use, compact-sized design
  • Data Hold freezes reading on display
  • Built-in battery level check and measurement verification test
  • Auto Power Off conserves battery power
  • Complete with pins (installed on meter), protective cap, and 9V battery

Extech MO257 Pinless Moisture Meter

Non-invasive moisture content measurements in wood/building materials

Take pinless (non-invasive) Moisture measurements on wood and building materials without damaging the surface with the depth of approx <0.78'' (20mm) with Extech's MO257 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. Easy-to-operate with automatic calibration of the meter when powered on. Large backlit triple LCD displays moisture reading and Max and Min readings. User can adjust two alarm levels where it will show visual alert with flashing “RISK” or “WET” indicators with beeper alert. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A must have tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.

  • Relative pinless moisture reading for non-invasive measurement from 0.0 to 100.0 with 0.1 resolution
  • Multifunction backlit triple LCD display
  • Pinless measurement depth from 0.78'' (20mm) to 1.6'' (40mm) below the surface
  • High frequency sensing technology
  • Automatic Data Hold
  • Two adjustable alarm levels with audible beeper and visual (flashing ''RISK'' or ''WET'') indicators
  • Automatic calibration (in dry air) when meter is powered on
  • Low battery indication, Auto Power off
  • Complete with 3 AA batteries and pouch

Extech MO280 Pinless Moisture Meter

Non-invasive moisture measurement with virtually no surface damage

The MO280 provides Non-invasive moisture measurements in wood and other building materials with virtually no surface damage. Meter uses electro-magnetic technology to quickly indicate the moisture content of wood and building materials. Select from 10 wood types and measurement ranges. The LCD displays % moisture of wood or material being tested. It has a measurement depth to 0.75 in. (22mm) below the surface. The meter also features an automatic internal test and calibration and low battery indication. Complete with 9V battery and pouch case.

  • Non-invasive measurement to monitor moisture in wood and other building materials
  • Select from 10 wood types and measurement ranges
  • Measurement depth to 0.75'' (20mm) below the surface
  • LCD displays % moisture of wood or material being tested

Extech MO53 Pinless Moisture Meter

Pinless Moisture Meter for Non-Invasive Measurements on Wood and Other Building Materials

Use Extech’s MO53 Pinless Moisture Meter for non-invasive measurements on wood and other building materials with virtually no surface damage. The depth of measurement is approx <0.75'' (20mm). Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A must-have tool for analyzing the after-effects of water leakage behind walls and in ceilings.

  • Pinless moisture measurement depth to <0.75'' (20mm)
  • Measures Moisture up to 99.9% for Wood and 56.5% for other building materials
  • Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
  • Audible Alert - Tone rate beeps faster as the moisture level increases
  • Icons display low, medium and high levels of moisture content
  • Easy-to-use, compact-sized design
  • Data Hold freezes reading on display
  • Built-in battery level check and measurement verification test
  • Auto Power Off conserves battery power
  • Complete with 9V battery and wrist strap

Extech MO57 Pinless Moisture Meter

Pinless Spherical Sensor Moisture Meter for Non-Invasive Measurements on Wood and Other Building Materials

Take pinless (non-invasive) Moisture measurements on wood and building materials without damaging the surface with the depth of approx <4'' (100mm) with Extech’s MO57 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A musthave tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.
 

  • Pinless moisture measurement depth to <4'' (100mm)
  • Measures Moisture up to 99.9% for Wood and other building materials
  • Displays moisture level in wood and building materials such as wall board, sheet rock, tiles, cardboard, plaster, concrete, and mortar
  • Audible Alert - Tone rate beeps faster as the moisture level increases
  • Icons display low, medium and high levels of moisture content
  • Easy-to-use, compact-sized design
  • Data Hold freezes reading on display
  • Built-in battery level check and measurement verification test
  • Auto Power Off conserves battery power
  • Complete with 9V battery and wrist strap

Extech MO260 Combination Pin/Pinless Moisture Meter

Monitor wood/building materials' moisture content without surface damage

MO260 is a Combination Pin/Pinless Moisture Meter which measures Relative Moisture in wood and other building materials using pinless technology plus % of Moisture in sheetrock and other materials using the direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 0.75'' (22mm) below the surface. Complete with 9V battery, replacement pins, protective cap, and pouch case.

  • %WME (wood moisture equivalent) pin moisture reading
  • Relative pinless moisture reading for non-invasive measurement
  • Digital LCD readout with backlighting feature and tri-color LED bargraph
  • Quickly indicates the moisture content of materials
  • Pinless measurement depth to 0.75'' (22mm) below the surface
  • Electro-magnetic sensing technology
  • Built-in calibration check, Low battery indication
  • Complete with 9V battery, replacement pins, protective cap, and pouch case

Extech MO265 Combination Pin/Pinless Moisture Meter

Non-invasive or contact moisture measurements

MO265 is a Combination Pin/Pinless Moisture Meter which measures Relative Moisture in wood and other building materials using pinless technology plus % of Moisture in sheetrock and other materials using direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 0.75 in. (22mm) below the surface. In addition, a remote pin probe is included to measure moisture in difficult to access places. Complete with 9-Volt battery, replacement pins, remote pin probe, protective cap, and pouch case.

  • Choice of measuring moisture in wood and other building materials with pinless technology or use traditional remote pin probe (included)
  • %WME (wood moisture equivalent) pin moisture reading
  • Relative pinless moisture reading for non-invasive measurement
  • Digital LCD readout with backlighting feature and tri-color LED bargraph
  • Quickly indicates the moisture content of materials
  • Pinless measurement depth to 0.75'' (22mm) below the surface
  • Electro-magnetic sensing technology
  • Built-in calibration check
  • Replaceable measurement electrode pins
  • Includes remote pin probe to measure moisture in difficult to access areas
  • Complete with 9V battery, remote pin probe, replacement pins, protective cap, and hard carrying case

Extech MO290 Pinless Moisture Psychrometer + IR

8-in-1 Meter with Built-in IR Thermometer

The MO290 is an 8-in-1 meter that combines a Pin/Pinless Moisture Meter with a built-in InfraRed Thermometer. Additional measurements include: Temperature, Humidity, Grains per Pound, Dew Point, Vapor Pressure, and Condensation Point. Complete with pin moisture probe, 9-Volt battery, and case.

  • Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature
  • Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage
  • Remote pin-type probe (MO290-P) for contact moisture readings (3ft/0.9m cable length)
  • Select from multiple wood types and measurement ranges
  • Easy to read, large dual display with backlit feature
  • Simultaneously displays % moisture of wood or material being tested and Air Temperature, IR Temperature, or Humidity
  • Pinless measurement depth to 0.75'' (19mm) below the surface
  • Non-Contact InfraRed Thermometer with 8:1 distance to spot ratio and 0.95 fixed emissivity
  • Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP), Dew Point (DP), and Vapor Pressure
  • Programmable high/low Moisture and Humidity alarms
  • Automatic calculation of differential Temperature (IR - DP) to determine condensation point
  • Min/Max and Data Hold, Auto Power Off
  • Complete with battery and pouch case

Extech MO55 Combination Pin/Pinless Moisture Meter

Quick Moisture Measurements on Wood and Building Materials

Take quick Moisture measurements on wood and building materials with choice of pin or pinless (non-invasive) method. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A must-have tool for analyzing the after-effects of water leakage behind walls and in ceilings.
 

  • Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
  • Pinless moisture measurement depth to <1'' (25mm)
  • Audible Alert — Tone rate beeps faster as the moisture level increases
  • Icons display low, medium and high levels of moisture content
  • Easy-to-use, compact-sized design
  • Data Hold freezes reading on display
  • Built-in battery level check and measurement verification test
  • Auto Power Off conserves battery power
  • Complete with pins (2), protective cap, and 9V battery

Extech MO55W Wireless Datalogging Pin/Pinless Moisture Meter

Quickly Measure the Moisture Content in Wood and Other Building Materials

Quickly measure the moisture content in wood and other building materials with your choice of Pinless (non-invasive) or Direct Pin method measurement. Using the wireless feature, Bluetooth® Datalogging Module, and the free ExView® W-Series App, you can transmit readings in realtime to your smart devices, store over 15K readings for wireless transfer to generate a report/data analysis, add notes and readings to photos taken from your smart device camera, and use your smart device as a 2nd display for easy viewing or sharing. The MO55W is simple to operate and uses icons that indicate moisture content and alerts you when moisture levels exceed programmed limits.

  • MO55W Pin/Pinless Meter:
    • Wireless function with Bluetooth® Datalogging Module transmits readings to iOS® and Android™ devices for remote viewing using the free app
    • Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
    • Non-invasive Pinless moisture measurement to a max. depth of 1'' (25 mm)
    • Direct Pin moisture measurement uses ~0.4'' (10 mm) pins
    • Audible Alert (beep rate increases as moisture level increases)
    • Icons display low, medium and high moisture range
    • Built-in Pin-Mode accuracy test
    • Data Hold and Auto Power Off
    • Ideal for building restoration, and other applications where it is critical to detect moisture in flooring, tiles, and beneath carpeting
  • DAT12 Bluetooth® Datalogging Module:
    • Record over 15k readings and transmit them to a smart device
    • Free ExView® W-Series App, provides Wireless Data Streaming with real-time remote viewing of readings
    • Adjustable sample rate and file size support most application needs
    • Programmable High/Low audible alarms
    • Color coded log reporting for easy identification of Alarm events
    • Record data directly to phone or tablet
    • Export data in Excel® format
    • Share data files and snapshots directly from application
    • Take snapshots of the measurement area with your connected smart phone or tablet camera to capture measurement-related images and to document date/time stamps and measurement data
  • Complete with two pins (installed on meter), protective cap, Wireless Datalogging Module (DAT12), 9V battery, and soft case

Extech MO750 Soil Moisture Meter

Meter with Heavy-Duty 8'' (20cm) Probe

The Extech MO750 Soil Moisture Meter has an integrated 8 in. heavy-duty moisture probe which monitors moisture levels in soil from 0 to 50-percent and easy 1-handed operation. Meter features a durable, water-resistant housing with a large LCD display, data hold to freeze the readings on the display, and minimum/maximum function. Comes with replaceable moisture probe (MO750-P), 4 AAA batteries, probe sensor cap, and user manual.

  • Soil moisture content measurement from 0 to 50%
  • Easy one-hand operation
  • Min/Max records minimum and maximum moisture readings
  • Data hold to freeze reading on display
  • Water resistant
  • Complete with 4 x AAA batteries and sensor cap

Extech MO260-RK Restoration Kit

A complete solution for the Restoration Contractor

Model MO260 combination Pin/Pinless Moisture Meter monitors moisture in wood and other building materials with virtually no surface damage. Choose from %WME (wood moisture equivalent) pin moisture reading (6.0 to 94.8%) or Relative pinless moisture reading for non-invasive measurement (0 to 99.9). It has a measurement depth to 0.75'' (22mm) below the surface. The digital LCD readout with backlighting also features a tri-color LED bargraph. Model RH490 Precision Hygro-Thermometer measures Temperature, Humidity, Dew Point, Wet Bulb, and Mixing Ratio in GPP (grains per pound/grains per kilogram). It features less than 30 second RH response time with 2%RH accuracy and a dual backlit display. The kit is supplied in a hard carrying case that provides protection and organization for the meters and accessories whenever they are needed.

  • MO260 - Combination Pin/Pinless Moisture Meter
    • Monitor moisture in wood and other building material with virtually no surface damage
    • %WME (wood moisture equivalent) pin moisture reading (6.0 to 94.8%)
    • Relative pinless moisture reading for non-invasive measurement (0 to 99.9)
    • Measurement depth to 0.75 (22mm) below the surface
    • Digital LCD readout with backilighting feature and tri-color LED bargraph
  • RH490 - Precision Hygro-Thermometer
    • Measures Temperature, Humidity, Dew Point, Wet Bulb, and Mixing Ratio in GPP (grains per pound/grains per kilogram)
    • Less than 30 second RH response time with 2%RH accuracy
    • Dual backlit display
  • Kit is supplied in a hard carrying case that provides protection and organization for the meters and accessories whenever they are needed

Extech MO280-KW Water Damage Restoration Kit

Specifically designed for water damage restoration contractors

Specifically designed for water damage restoration contractors. Monitor job site conditions, progress, and insurance company reporting. Kit includes an MO280 pin less Moisture Meter, MO210 Pocket Moisture Meter, and RH490 Precision Hygro-Thermometer. Supplied in an attractive storage case that provides protection and organization for the testers whenever they are needed.

  • Kit includes: MO280 Pinless Moisture Meter, MO210 Pocket Moisture Meter, RH490 Precision Hygro-Thermometer
  • Monitor job site conditions, progress, and insurance company reporting
  • Supplied in an attractive storage case

Extech MO280-RK Restoration Contractor's Kit

A complete solution for the Restoration Contractor

The Extech MO280-RK Restoration Contractor's Kit is a complete solution for the restoration contractor. This kit uses pins and pinless meters to better diagnose the amount of moisture content in a certain material. The thermal hygrometer provides a fast and accurate reading of ambient room conditions and GPP calculations. This kit is a supplied in a rugged hard carrying case. Kit includes the MO280 Pinless Moisture Meter which displays 0 to 99% moisture from a selection of 10 different wood types. The measurement surface depth is 0.75 of an inch with virtually no surface damage. MO220 Wood Moisture Meter comes with integral pins and a remote pin probe that displays up to 99.9% of the moisture level with 8 different wood types with calibrations for approximately 170 wood species. Kit also includes the RH490 Precision Hygro-Thermometer which has a 2% RH accuracy and a fast 30 second RH response time. Measures humidity, temperature, dew point, wet bulb, GPP and g/kg. The Extech MO280-RK Restoration Contractor's Kit also includes the RHT10 Humidity and Temperature USB Datalogger that records up to 16,000 readings each of RH and temperature. The USB interface and software is included in the kit.

  • MO280 - Pinless Moisture Meter
    • Displays % moisture from 0 to 99%
    • Measurement depth to 0.75'' (22mm) below the surface
  • MO220 - Wood Moisture Meter
    • Memory contains 8 wood groups with calibrations for approximately 170 species of wood
    • Measures wood moisture from 6 to 99.9%
  • RH490 - Precision Hygro-Thermometer
    • Measures Temperature, Humidity, Dew Point, Wet Bulb, Absolute Humidity, GPP
    • Less than 30 second RH response time with 2%RH accuracy
  • RHT10 - Humidity/Temperature USB Datalogger
    • Datalogs 16,000 RH and 16,000 Temperature readings
    • User-programmable sampling rate and alarm thresholds
  • Kit is supplied in a rugged heavy duty hard carrying case that provides protection and organization for the meters and accessories whenever they are needed

Extech MO290-EK Energy Audit Kit

Monitor airflow, moisture levels, and provides inspection equipment to find energy loss

The MO290-EK is a Kit that gives you four powerful tools for energy auditing. Monitor airflow, moisture levels, and provides inspection equipment to find energy loss. Comes with the MO290 Pinless Moisture Psychrometer plus Infrared Thermometer, AN200 - CFM/CMM Mini Thermo-Anemometer plus Infrared Thermometer, CO250 Portable Indoor Air Quality CO2 Meter/Data logger and BR200 Video Borescope/Wireless Inspection Camera. Supplied in a rugged, heavy duty hard carrying case that provides protection and organization for the meters and accessories.

  • MO290 - Pinless Moisture Psychrometer + InfraRed Thermometer
    • Monitor moisture in wood and building materials with virtually no surface damage
    • Patented InfraRed Thermometer with laser pointer for non-contact surface temperature measurement
    • Built-in RH/Temperature probe measures Relative Humidity Air temperature plus Grains Per Pound (GPP) Dew Point (DP) and Vapor Pressure
    • Includes Pin Probe for contact moisture readings
  • AN200 - CFM/CMM Mini Thermo-Anemometer + InfaRed Thermometer
    • Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
    • Built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with 8:1 distance to spot ratio and Laser Pointer
    • Large (9999 count) LCD Backlit Display
  • CO250 - Portable Indoor Air Quality CO2 Meter/Datalogger
    • Measures Carbon Dioxide, Temperature, Humidity, Dew Point and Wet Bulb and calculates statistical 8 hour and 15 minute time weighted averages
    • RS-232 interface, data acquisition software and cable included to analyze data on your PC
  • BR200 - Video Borescope/Wireless Inspection Camera
    • 17mm camera with 39” (1m) waterproof (IP67) flexible gooseneck
    • Detachable wireless 3.5'' Color TFT LCD Monitor that can be viewed from up to 32ft (10m) from the measurement point
    • MicroSD memory card for capturing images (JPEG) or video (AVI) for viewing on your PC
  • Supplied in a rugged heavy duty hard carrying case that provides protection and organization for the meters and accessories

Extech MO290-RK Water Restoration Contractor Kit

A complete solution for the Restoration Contractor

Use combination moisture meter/thermal hygrometer to capture all ambient conditions as well as moisture levels in one meter. Includes essential probes to measure moisture levels under baseboards, in between walls, and in hard wood and plywood subfloors. Use USB Humidity/Temperature datalogger for GPP calculations

  • MO290 - Pinless Moisture Psychrometer + InfraRed Thermometer
    • Monitor moisture in wood and building materials with virtually no surface damage
    • Includes the following contact moisture reading probes: Pin Probe Hammer Probe Extension Probe and Baseboard Probe
    • Patented InfraRed Thermometer with laser pointer for non-contact surface temperature measurement
    • Built-in RH/Temperature probe measures Relative Humidity Air temperature plus Grains Per Pound (GPP) Dew Point (DP) and Vapor Pressure
  • RHT10 - Humidity/Temperature USB Datalogger w/ GPP (g/kg) Calculation
    • Datalogs 16,000 RH and 16,000 Temperature readings
    • User-programmable sampling rate and alarm thresholds
    • USB interface for easy setup and data download using the included software
  • Supplied in a rugged heavy duty hard carrying case that provides protection and organization for the meters and accessories whenever they are needed

Extech MO200-PINS Replacement Pins for MO210/MO260/MO265 Moisture Meters

The MO200-PINS is a set of Moisture Meter Replacement Pins. Product is for use with Extech MO210, MO260, and MO265 Moisture Meters and is field replaceable. This product comes with fifty durable pins.

Features

 

For complete specs please download the product datasheet (not available for some accessories)

Extech MO220-PINS 50 Replacement Pins for MO220/MO290-P

MO220-PINS is a set of Moisture Replacement Pins for the Extech MO220 Moisture Meter and MO290-P Moisture Probe. Package of 50 pins. Pins have a 0.4'' (1cm) depth. Pins can also be used with the MO290-P Moisture Probe.

Extech MO290-BP Moisture Baseboard Probe

Dual fixed flat pins with 4.1''/10.5cm pin length

Moisture Baseboard Probe for Extech Moisture Meters. Dual fixed flat pins are 4.1'' (10.5cm) long. Complete with 30'' (76.2cm) cable and RJ45 connector.  For use with MO290, MO295, MO297 and MO300 Moisture Meters.

  • Compatible with MO290 moisture meter

Extech MO290-EP Extension Moisture Probe

Dual sharp pins with 3.4''/8.5cm pin length

The MO290-EP is an Extension Moisture Probe with dual sharp pins. Pins measure 3.4 in.(8.5cm) long, product features a 30 in. cable length. Moisture Probe can be used with MO290-EXT probe extenders to increase the working distance of the probe up to 23 in. when 2 extenders are combined together.
 

Extech MO290-EXT Moisture Probe Extenders

Set of two 11.8'' (30cm) Probe Extenders

Moisture Probe Extenders for the MO290-EP Moisture Probe. The 11.8 in.(30 cm) handle attaches to the bottom of the MO290-EP probe to extend it for use in hard to reach areas. 2 extenders are included and can be combined together to extend the probe by 23.6 in. (60cm).

  • Compatible with MO290-EP - Extension Probe with 30'' (76.2cm) cable
1 - 24 of 31

Switch to Mobile Version