5.6'' color LCD display, 23 automatic measurements, waveform recorder

• One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
• Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Built-in 6,000 count True RMS MultiMeter with analog bargraph
• Easy-to-use pop-up menu with built-in multi-language system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
• Automatic cursor tracking measurements
• Pass-Fail function compares a stored waveform to an unknown input
• Average Mode for smoothing waveforms
• Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
• Square Wave Output (2V, 1kHz) for probe adjustment
• Complete with two 1X/10X oscilloscope probes, test leads, 7.4V Li-Ion battery, universal AC charger, and carrying case

Dual-channel Oscilloscope with 3.8'' (97mm) color LCD display

Extech's MS420 20 MHz 2-Channel Digital Oscilloscope offers a range of capabilities for effective troubleshooting of electronics and electronically controlled electrical systems. With 20 MHz bandwidth and conveniences like auto-set which optimizes the position, range, time base, and triggering to assure a stable display of virtually any waveform, the MS420 can be used in field repairs or bench duty. To identify subtle problems, Peak Detect features a fast 50 ns glitch capture. Core functions like XY Mode, FFT function, Trigger Hold off, Waveform Math, Averaging Mode and Persistence Mode all ensure you can confidently troubleshoot problems using a variety of approaches. To start up recurring testing routines, you can store and recall up to 4 waveform screens and setups to save time from job to job. This CAT II-rated oscilloscope extends its functionality with complete DMM functions that are displayed on the large 3. 8'' (97mm) color LCD display. The MS420 comes with two 1X/10X oscilloscope probes, test leads, Windows XP/Vista compatible USB software and cable, capacitor measuring module, adjustment screwdriver, AC adaptor/charger, hard carrying case, user manual, and manufacturer's one-year limited warranty.

• Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms
• Peak Detect function for 50ns glitch capture
• XY Mode and FFT function to view component frequencies
• Twenty Automatic Measurements including Frequency, Cycle, Average, Peak to Peak, RMS and more
• Waveform Math: Add, Subtract, Multiply, and Divide
• Average Mode for smoothing waveforms
• Persistence Mode for observing dynamic signals
• Store and recall up to 4 waveform screens and setups
• USB interface and software for transferring waveforms and data

Replacement battery for MS6000 series Oscilloscopes

The BATT-74V is a Li-Ion Rechargeable 7.4V replacement or spare battery for Extech's MS6000 Series Oscilloscopes.

• Rechargeable
• 7.4V Lithium Ion
• 3500mAh

Replacement Probe for MS6000 series Oscilloscopes

The TL620 is a 200MHz 10:1 Oscilloscope Probe with 1.2 meter cable. Featuring 10M ohm input impedance , 20pF Capacitance, Max. Voltage of 600V, 15 to 40pF compensation range. Includes probe tip, ground lead, marker ring, sprung hook, and adjustment tool.

Compatible with MS6060 and MS6100 2-channel digital oscilloscopes

Replacement Probe for MS6000 series Oscilloscopes

The TL625 is a 100MHz High Voltage Oscilloscope Probe. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance, 2000V max measurements and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.

Compatible with MS6060 and MS6100 2-channel digital oscilloscopes