LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

Centrifuges

SPRINT™ 8 PLUS CLINICAL CENTRIFUGE

Unlike traditional clinical centrifuges the increased speed capability (4445xg) of the Sprint™ 8 PLUS allows for the separation of serum or plasma in as little as 2-3 minutes. Additional features include:


– A large back-lit, liquid crystal display
– High capacity rotor, 8 tubes up to 15ml (conical or round bottom)
– Unique EZ-Scroll™ touch pad
– Timer up to 99hr 99mins. / continuous
– Storage of commonly used run-times
– Control of speed in in both rpm and rcf
– Adjustable acceleration and deceleration levels
– Safety imbalance detection system
– Momentary operation
– Electrical lid lock

Ideal for rapid production of serum and plasma
 

  • 8 Position fixed angle rotor rotor
  • Ideal for rapid production of serum and plasma
  • Unique EZ-Scroll™ touch pad
  • Digital speed control in rpm or rcf with adjustable acceleration and deceleration rates (up to 6,800rpm/4,445xg)
  • Program storage up to 99
  • Adjustable speed and timer

SPRINT™ 6H PLUS CLINICAL CENTRIFUGE

The Sprint™ 6H PLUS is our premium clinical centrifuge offering providing horizontal (swing-out) centrifugation:


– Increased speed up to 4,000rpm / 2850xg
– Back-lit, liquid crystal display
– Adjustable speed in increments of 100rpm
– Digital speed control in rpm or rcf
– Adjustable acceleration and deceleration levels
– A safety imbalance detection system
– Momentary operation
– High capacity rotor for tubes up to 15ml (conical or round bottom)

In addition, the Sprint™ 6H PLUS offers an optional fixed-angle rotor for centrifugation of up to 12 tubes.
 

  • 6 Position horizontal (swing out) rotor
  • Holds all common blood collection tubes up to 15ml
  • Digitally set speed in rpm or rcf (up to 4,000rpm/2,850xg)
  • Adjustable speed and timer
  • Safety imbalance detection system

SPRINT™ 6H CLINICAL CENTRIFUGE

The Sprint™ 6H is a compact centrifuge that includes a six position, swing-out rotor. Prior to centrifugation, tubes are loaded vertically. Once the centrifuge starts, tubes swing to a horizontal position, providing the flat-line separation that is commonly preferred for further analysis.

Designed for use with 10ml tubes (16 x 100mm), smaller tubes (12 x 75mm and 12 x 100mm) can be centrifuged using the optional adapters (item: C3100-ADP).

With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for removal of samples.
 

  • 6 Position horizontal (swing out) rotor
  • Holds all common blood collection tubes up to 10ml
  • Designed specifically for blood, urine, and cell separations
  • Adjustable timer
  • UL Listed

LC-8™ CENTRIFUGE

Benchmark’s LC-8 series of laboratory centrifuges is uniquely designed to meet a wide range of applications in both the clinical and research laboratory. An eight position rotor is included and designed to directly accept 10ml and 15ml test-tubes (conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning.


The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode.

To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected.
 

  • Digital Speed control up to 5,000 rpm
  • Safety lid-lock, prevents opening lid until rotor stops
  • Unique air-flow design keeps samples cool
  • 8 tube capacity, for tubes up to 15ml

MC-24 TOUCH MICROCENTRIFUGE

Benchmark’s MC-24 Touch is the first microcentrifuge in its class to feature touch screen control. In addition to the next generation control panel, the centrifuge also offers high speed (up to 13,500 rpm/16,800 xg) and a unique COMBI-Rotor™ that accepts both standard microtubes (1.5/2.0ml) and PCR tubes/strips (0.2ml), making this the perfect partner for any molecular biology laboratory.


The large, color touch screen shows actual speed (in rpm or rcf) along with set and remaining time. Up to 9 speed/time profiles can be stored in memory and the home screen displays a “mySpin” icon for instant recalls a designated favorite profile.

Supplied with Benchmark’s unique COMBI-Rotor™, the MC-24 Touch will accept 24 x 1.5/2.0ml tubes and 2 strips of 0.2ml tubes (16 x 0.2ml) without requiring separate adapters. There is also an optional 8 place rotor available for 5ml tubes and cryovials. Samples are kept cool, even during extended runs at the maximum speed setting by a proprietary air flow system that moves air evenly and quietly throughout the chamber.

  • Full Color Touch Screen
  • mySpin™ 1 button program recall
  • COMBI-Rotor™ accepts tubes and strips
  • Compact design, 9 x 12 x 7.75 in.
  • Unique air-flow system, keeps samples cool

MC-12 HIGH SPEED MICROCENTRIFUGE

Benchmark’s MC-12 is the first and only compact microcentrifuge capable of achieving centrifugal speeds up to the critical threshold of 16,000 xg, often held as the standard for many molecular biology/DNA protocols. Its’ brushless, maintenance free drive system makes it powerful, yet compact enough to allow each work station to be fully equipped with a personal centrifuge.


The MC-12 defines a new class of microcentrifuge: compact, quick, powerful and affordable. All aspects of microcentrifuge performance were taken into consideration and no compromises were made. In addition to its unsurpassed speed, the MC-12 also delivers shortened acceleration/deceleration times, whisper quiet operation and its computer-designed airflow pattern minimizes sample temperature increases during longer runs at high speeds.

All operating parameters are set using a single, conveniently located control knob and the large, bright LCD provides a clear indication of time and rpm or g-force. A separate momentary spin button permits instant spin downs, without setting or disturbing any preset parameters. The aircraft grade aluminum rotor accepts 1.5 to 2.0ml tubes directly, as well as 0.5ml and 0.2ml tubes with optional adapters. For applications requiring sub-ambient temperatures, the MC-12 is cold room safe.
 

  • 12 tube capacity / Up to 16,100 xg
  • Less than 9 in. wide
  • Quick deceleration
  • Whisper quiet operation

PLATEFUGE™ MICROCENTRIFUGE

Benchmark’s PlateFuge™ is the first “mini” sized centrifuge with a swing out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields.

In spite of its remarkably small footprint (9×10 in.), the PlateFuge™ includes a uniquely designed, swing out rotor (patent pending) capable of securing 2 microplates. The easily accessible rotor chamber includes two plate carriers that rest at a 75° angle. This allows plates to be inserted confidently without sealing tapes or caps. Upon closing the lid of the centrifuge, the rotor accelerates and the centrifugal force “swings” the plates into a horizontal position. Any droplets on the walls of the plate quickly concentrate into the well bottoms.

With a g-force of 600 xg, most samples can be spun down in less than 20 seconds. To end a run, simply open the lid and the automatic, electric brake brings the rotor to a quick, smooth stop in just 4 seconds. Plates can then be easily removed
from the rotor.

 

  • Quickly spins down droplets in PCR plates
  • Unique swing-out rotor design prevents spillage (patented)
  • Half the size of traditional centrifuges
  • Accepts all popular types of PCR plates (skirted, semi, and non) and most microtiter plates

 
 

MYFUGE™ 5 MICROCENTRIFUGE

The myFuge™ 5 microcentrifuge includes a four position rotor for compatibility with a variety of 50ml test tubes, including 5ml snap cap centrifuge tubes. In addition, this combination rotor has four additional slots for centrifuging standard microtubes (1.5 / 2.0ml). Simply close the lid and the centrifuge quickly accelerates to the fixed speed of 5,500 rpm.


The 5ml rotor positions accept 5ml centrifuge tubes directly, while 5ml blood and culture tubes (12 x 75mm) are accepted with the included adapters. The microtube positions are designed to accept 0.5ml and 0.2ml tubes with the use of optional adapters.

 

  • For quick spin downs of 5ml centrifuge tubes
  • Includes adapters for 5ml blood tubes
  • Starts and stops with closing/opening of the lid
  • Optional adapters to centrifuge cryovials

STRIPSPIN™ 12 MICROCENTRIFUGE

The new StripSpin 12 Mini Centrifuge from Benchmark is the only mini centrifuge designed for centrifugation of 12 position PCR strips. With a fixed speed that produces 2,000 xg, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5,500 rpm. Open the lid, and the rotor quickly decelerates for easy removal of samples.
 
  • Unique rotor holds 12 position PCR strips
  • “Mini” sized, less than 6 inches wide
  • Near silent operation
  • Starts and stops with closing/opening of the lid

MYFUGE™ 12 MINI CENTRIFUGE

Unlike traditional mini centrifuges, the new MyFuge™ 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor™ is all that is required for running 12 microtubes and/or 4 PCR strips.

With a fixed speed that produces 2,000 xg, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5500 rpm. Open the lid, and the rotor quickly decelerates for removal of samples.

At just 5.5 inches wide and less than 4.5 inches tall, the MyFuge 12 truly is a personal microcentrifuge with unmatched capacity and flexibilty.
 

  • COMBI-Rotor for tubes and strips
  • Twice the capacity of most mini centrifuges
  • Near silent operation
  • Starts and stops with closing/opening of the lid
  • Conserves valuable bench space

MYFUGE™ MINI CENTRIFUGE

The MyFuge™ Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.

An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor.
 

  • Clik-N-Lok™ INSTANT rotor attachment
  • Eight position microtube rotor
  • Storage compartment for PCR rotor & 0.5ml adapters
  • Near silent operation
  • Decelerates in just one second
  • Four position PCR strip rotor
 

Switch to Mobile Version