LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

Racks

1 - 24 of 43

WORK 2 STORE® EXPANDING STORAGE RACK / TUBE RACK / TUBE STORAGE

Work2Store® Expanding Tube Rack / Tube Storage
Single Rack, Double function

Reduce sample handling time and the need for several racks when working with samples for cold temperature storage.

The opening and closing mechanism allows the rack to expand, creating needed room for sample manipulation. When done, simply collapse the rack back to its compact form and it’s ready for the freezer.

Two versions available, the original (HS120018) for holding 1.5/2.0 mL cryo and microtubes and the micro (HS120183) reversible version for holding 0.5 mL and 0.2 mL tubes. 
  • Instantly creates more working space
  • Helps reduce potential cross contamination
  • Stops opened microfuge lids from interfering with other wells
  • Stackable, with alphanumeric well identifications
  • Will fit into standard 2'' (53 mm) freezer racking
  • Temperature range -80 to 121ºC

WIRE URINE CONTAINER RACK

Urine Container Rack
Durable racks for transport or sample handling

  • Ideal for urine containers up to 58 mm dia
  • Slotted bottom
  • Mesh bottom support
  • Chemically-resistant epoxy-coated steel wire racks
  • Autoclavable

WIRE UNIVERSAL BOTTLE RACK

Universal Bottle/Tube Rack
Durable racks for transport or sample handling
  • Rack suitable for Universal, McCartney and Scintillation vials and low profile tubes up to 33 mm dia
  • Available in a 2 x 6 or a 5 x 10 format
  • Mesh bottom support
  • Chemically-resistant epoxy-coated steel wire racks
  • Autoclavable

WIRE CENTRIFUGE BOTTLE RACK

Wire Centrifuge Bottle Rack
Durable racks for transport or sample handling

  • Chemically-resistant, HDPE coated wire racks are good to -40° C
  • Suitable for conical, round or flat bottom, glass or plastic, tubes and bottles that cannot stand up by themselves
  • Two levels of grids help keep bottles secure
  • Slotted bottom
  • 2 x 3 array
  • Wells: 6
  • Well Diameter: 64 mm
  • Dimensions: 8.1 x 5.3 x 4.1 in (20.5 x 13.5 x 10.4 cm)
  • Autoclavable

WIRE BIJOU BOTTLE TUBE RACKS

Epoxy Coated Wire Racks
Durable racks for transport or sample handling
  • Chemically-resistant, HDPE coated wire racks are good to -40° C
  • Suitable for conical, round or flat bottom, glass or plastic, tubes and bottles
  • Rack suitable for bijou bottles and low-profile tubes up to 25 mm dia
  • Mesh bottom support
  • Autoclavable

WIRE 15 & 50 ML TUBE RACKS

Wire 15 mL/50 mL Tube Racks
Durable racks for transport or sample handling.

  • Chemically-resistant, HDPE coated wire racks are good to -40° C
  • Suitable for conical, round or flat bottom, glass or plastic, tubes and bottles
  • Supports capped tubes up to 18 mm dia. — 3 x 5 format
  • Supports capped tubes up to 30 mm dia. — 2 x 4 format
  • Square wells and three deck levels help keep tubes secure
  • Slotted bottom
  • Autoclavable

WIRE 13 AND 16 MM TUBE RACKS

13 and 16 mm Wire Tube Racks
Durable racks for transport or sample handling.

  • Chemically-resistant, HDPE coated wire racks are good to -40° C
  • Suitable for conical, round or flat bottom, glass or plastic, tubes and bottles
  • Holds all brands and types of 13 and 16 mm tubes
  • Available in two formats
  • Square wells and three deck levels help keep tubes secure
  • Slotted bottom
  • Autoclavable

UNIVERSAL TUBE RACK

UNIVERSAL TUBE RACK  
Ideal for firmly holding a wide range of tubes and vessels.


Quickly change tube sizes with this adaptable polypropylene rack. Open the well with a turn of the knob or directly insert a tube into the opening.
  • Made of polypropylene
  • Holds up to 12 similar size tubes
  • Alphanumeric identification for quick location and retrieval of tubes
  • Side handles for easy transport
  • Not recommended for autoclaving

TUBE RACK 20-WELL

Interlock multiple racks to increase tube storage.
  • Made of polypropylene
  • Easily remove tubes using finger slot on front of the rack
  • Racks have large molded coordinates for easy tube identification
  • Bi-level rack enables easy tube label identification
  • Tubes: 1.0, 1.5, 2.0 mL
  • Wells: 20
  • Well Dia: 10 mm
  • 21.1 x 9 x 5 cm
  • 6/pk
  • Autoclavable

TRACRACK® - TUBE RACK AND CRYO STORAGE BOX

TracRack, Tube Storage & Tube Rack, in one

Removing and working with samples from cold temperature storage has never been easier.

Eliminate the hassle of taking an entire rack of samples out of cold storage with the TracRack® that enables lab professionals to remove one row of samples at a time.

Eight individual segments are nested in a 2” polypropylene film box that allows users to easily open, identify and remove only the segments of samples needed.

Once the segments are removed, simply replace the box lid and leave the remaining samples in storage each tube segment is made from durable polypropylene and allows for easy working while saving valuable counter space.

  • Helps reduce potential cross contamination
  • Saves valuable working space and allows more room for sample manipulation
  • Stops opened microfuge lids with interfering with other wells
  • Alphanumeric well identification
  • Tube segments sold with the box and lid
  • 1 ea, 10 ea/cs
Two versions are available:

TracRack
  • Made of polypropylene
  • Eight segments per box
  • 1.5–2.0 mL cryo and micro-centrifuge tubes (64 tubes)
  • Wells have a center depression to stabilize conical tubes and a cryogenic vial lock for one-handed cap removal
  • Alphanumeric well identification for quick sample ID and retrieval
  • Autoclavable
TracRack Microtube Rack
  • Made of polypropylene
  • Eight reversible segments per box
  • 64 x 0.5 mL tubes, 96 x 0.2 mL microtubes, or a combination of both
  • Alphanumeric well identification for quick sample ID and retrieval
  • Autoclavable

TracRack Outer Box
  • Made from thin film polypropylene material
  • Tapered front design for easy segment removal
  • Moisture and mold resistant
  • Removable segments allow outer shell to be used for storage of other small laboratory products
  • 2 in. (5.3 cm) boxes fit in standard freezer racks
  • Store down to -80ºC. Must use tubes capable of being stored at the required temperature of the user
  • Not recommended for autoclaving.

SNAP-TOGETHER CONICAL TUBE RACK

  • Use 15 and 50 mL tubes simultaneously
  • Shipped flat, easy-to-assemble ABS racks snap together securely
  • Designed for stable use in water baths
  • Alphanumeric grid reference aids for tube identification
  • Tubes: 15 mL  Wells: 30  Well Dia: 17 mm
  • Tubes: 50 mL  Wells: 20  Well Dia: 28 mm
  • 17.1 x 17 x 6.1 cm
  • Not recommended for autoclaving

ROTA-RACK® TUBE RACKS

Get organized with this fun, interlocked rack.
Rotate each of the four modules independently to configure for the tubes that you want to use.
  • Made from polypropylene
  • Suitable for a massive variety of culture, centrifuge, micro centrifuge, round, flat or conical bottomed tubes
  • Polypropylene rack maintains its orientation until you twist it again.
  • Two versions to cover smaller and larger tube requirements
  • Tubes: 50 mL  Wells:2  Well Dia: 29 mm
  • Tubes: 10-15 mL  Wells: 8  Well Dia: 20 mm
  • Tubes: 15-20 mL  Wells: 6  Well Dia: 16 mm
  • Tubes: 10-13 mL  Wells: 10  Well Dia: 13.5 mm
  • Dimensions: 8.81 x 4.33 x 4.33 in (22.4 x 11 x 11 cm)
  • 1/pk
  • Color: purple, blue, green, yellow
  • Autoclavable

ROTA-RACK® DUO

Rota-Rack® Duo Tube Rack
Dilution and concentration studies made easy!

Transfer solutions between 0.2 mL PCR® tubes and 0.5 and 1.5 mL micro centrifuge tubes.
  • Made from polypropylene
  • Rotate and customize to suit your application needs. 4 combinations possible
  • Blue section holds 48 x 0.5 mL and 48 x 1.5 mL microfuge tubes on the reverse side
  • Purple section holds 96 x 0.2 mL tubes in a standard array pattern one and 48 x 1.5 mL tubes on the reverse side
  • Tapered wells securely suspend tubes and makes removal easy
  • Alphanumeric well identification
  • 296 x 118 x 34 mm
  • Autoclavable

ROTA-RACK® MICROTUBE RACK

Get organized with this fun, interlocked rack.
Rotate each of the four modules independently to configure for the tubes that you want to use.
  • Made from polypropylene
  • Suitable for a massive variety of culture, centrifuge, micro centrifuge, round, flat or conical bottomed tubes
  • Polypropylene rack maintains its orientation until you twist it again.
  • Two versions to cover smaller and larger tube requirements
  • Tubes: 15 mL  Wells: 6  Well Dia: 16.4 mm
  • Tubes: 1.5/2.0 mL  Wells: 9  Well Dia: 11.2 mm
  • Tubes: .5 mL  Wells: 12  Well Dia: 8 mm
  • Tubes: .2 mL  Wells: 32  Well Dia: 6.5 mm
  • Dimensions: 8.81 x 4.33 x 4.33 in (21 x 10 x 10 cm)
  • 1/pk
  • Color: purple, blue, green, yellow
  • Autoclavable

REVERSIBLE RACKS 96-WELL

Easy-to-grasp tabs for sample handling and storage
96 wells for 0.5 mL tubes on one side and 96 wells for 1.5/2.0 mL tubes on the reverse side
  • Made of polypropylene
  • Wells are arranged in standard 8 x 12 array
  • Tabs on each end of rack snap lid into place
  • 0.5 mL wells separated by molded-in grid lines, making them easier to see
  • Raised rings around the 1.5 to 2.0 mL wells make tubes easier to remove
  • Autoclavable

REVERSIBLE PCR TUBE RACK

PCR Tube Rack Reversible
Removable hinged lid fits both sides

  • Made of polypropylene
  • PCR® side of the tube rack holds 8 or 12 x 0.2 mL tube strips or individual tubes
  • Reverse side holds 0.5 mL tubes
  • Both sides of the tube rack have 12 wells for 1.5 mL tubes
  • Tubes: 0.2 mL  Wells: 168  Well Dia: 5.5 mm
  • Tubes: 0.5 mL  Wells: 40  Well Dia: 7.6 mm
  • Tubes: 1.5/2.0 mL  Wells: 12  Well Dia: 11.4 mm
  • Autoclavable

RACK FOLD BLUE 13MM EA

Fold and Snap Test Tube Rack
Economical durable rack.
  • Polypropylene racks ship flat in one piece
  • Easy-to-assemble, just fold and snap together
  • Can be used in water baths
  • Open design allows samples to be incubated at the same temperature 
  • Rack design is optimal for tube stability 
  • Color code for easy identification 
  • Autoclavable
 

POP-UP TUBE RACK

POP-UP Tube Rack
Collapse for compact storage and “pop-up” for quick use.
  • Made from polypropylene
  • Easy to open — easy to close
  • Designed to help organize 15 and 50 mL tubes
  • Imprinted grid aids quick retrieval
  • Stack racks in open or closed position
  • Saves space when racks are not in use
  • Not recommended for cleaning in autoclave

PEG TUBE RACK

Fiberglass reinforced polypropylene racks are ideal for bench work or tube storage.
  • Made from polypropylene
  • Spacious peg design allows easy viewing of tube contents
  • Use as a drying rack for glass plates or upside-down tubes
  • Pegs remain straight even after repeated autoclaving
  • Embossed indexing, ribbed grips, and drainage holes
  • Autoclavable

ONERACK® TUBE RACK, HALF SIZE

OneRack® Tube Rack

Tough and highly resistant to acids, bases, solvents and heat

OneRack® durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces.

Fiberglass-Reinforced Polyoxymethylene (POM)
  • Available in half and full rack sizes for 5 different tube diameters
  • Have molded coordinates for tube orientation
  • Stable design for use in water baths
  • Flat labeling area for easier identification
  • Unique tear drop shaped openings for better retention of tubes
  • Offers the highest chemical and heat resistance (-40 to +121°C)
  • Autoclavable

ONERACK® TUBE RACK FULL-SIZE

OneRack® Tube Rack

Tough and more highly resistant to acids, bases, solvents and heat. 

Durable tube racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.

Fiberglass-Reinforced Polyoxymethylene (POM)
  • Available in half and full rack sizes for 5 different tube diameters
  • Have molded coordinates for tube orientation
  • Stable design for use in water baths
  • Flat labeling area for easier identification
  • Unique tear drop shaped openings for better retention of tubes
  • Offers the highest chemical and heat resistance (-40 to +121°C)
  • Autoclavable

ONERACK® TUBE RACK FULL SIZE, POLYPROPYLENE

OneRack® Tube Rack

Tough and highly resistant to acids, bases, solvents and heat

OneRack® durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces.

  • Made from Polypropylene
  • Offers good chemical and heat resistance (0 to 110°C)
  • Available in full rack sizes for 2 different tube diameters
  • Have molded coordinates for tube orientation
  • Stable design for use in water baths
  • Flat labeling area for easier identification
  • Unique tear drop shaped openings for better retention of tubes

ONE-WELL TUBE RACKS (FRICTION-FIT)

One-Well Tube Racks - Friction-Fit 
Tube holders for small space requirements.
  • Made from polystyrene
  • Slides smoothly across the benchtop
  • Tubes: 50 mL
  • Wells: 1
  • Well Dia: 29 mm
  • 9.2 x 3 cm
  • Not recommended for autoclaving

ONE-WELL TUBE RACK (WIRE)

One-Well Wire Tube Rack 
Tube holders for small space requirements.
  • Epoxy-coated steel
  • Holds conical and round bottom tubes
  • Base ring keeps tubes in place
  • Low temperature -40ºc
  • Tubes: 50 mL
  • Wells: 1
  • Well Dia: 29 mm
  • 9 x 6.7 x 6.7 cm
  • Autoclavable
1 - 24 of 43

Switch to Mobile Version