18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
Centrifuge Z 206 AThe Z 206 A accepts up to 12 x15 ml conical and round button tubes. For tubes with smaller dimensions we offer several adapters. For larger volumes we offer an angle rotor fo 6 x 50 ml conical and round buttom tubes. Features and Functions:-
• Microprocessor control
Display functions | Centrifuge Z 207 HDue to its compact design, the Hematocrit Centrifuge Z 207 H is even in the smallest laboratory applicable. It is used for quick and easy determination of the erythrocyte content in the blood (hematocrit level). In a very short time, up the 24 capillary tubes can be accelerated to 16,058 xg. After centrifugation, the layers of blood plasma and erythrocytes are clearly visible and the hematocrit level can be easily determined by using the reading device. Unique in this centrifuge class is the innovative panel with ''Touch'' function! Features and Functions:- • Microprocessor with large LCD display • Electrical lid lock • Quick access to samples • Active imbalance identifi cation and cut-off • Air Cooling System • Quick Acceleration and Deceleration • Noise level < 60 dBA, at max. speed • Easy removal of rotor • Manufactured in accordance to International Safety Regulations, i.e. IEC 61010 | ||
Centrifuge Z 216 MKThe Z 216 M and Z 216 MK are setting new standards in this centrifuge class.
Capable of centrifuging up to 44 x 1,5 / 2,0 ml at each run.
Due to their compact design and quiet running they are fitting perfectly in their working area. The powerful refrigeration system of Z 216 MK keeps samples at temperatures as low as 4°C during a continious run at 20000xg.
Display functions | Centrifuge Z 216 MThe Z 216 M and Z 216 MK are setting new standards in this centrifuge class.
Capable of centrifuging up to 44 x 1,5 / 2,0 ml at each run.
Due to their compact design and quiet running they are fitting perfectly in their working area.
Display functions | Centrifuge Z 207 MThe Microlitre Centrifuge, Z 207 M was designed specifically for small, compact spaces, suitable in any laboratory setting. The rapid acceleration allows short running time, with a max. speed of 13,500 rpm. Even with the high speed, this centrifuge is pleasantly quite. With this centrifuge, there is the option for a 24 x place mircolitre rotor, optional with hermetically sealed lid, and a rotor for Spin Column Kits. The highlight feature of the Z 207 M is, the ''Touch Operation'' function, of the control panel. Easy to operate, no need to remove gloves! A crucial detail is the Air Cooling System, which is designed to keep your samples cool, even at maximum speed. Features and Functions:-
• Microprocessor with large LCD display
Display functions | Centrifuge Z 167 MThe powerful and compact model Z 167 M is a replacement for our previous model Z 160 M. A brushless, maintenance free motor provides extremely fast acceleration and deceleration of the 18 place rotor. This Micro Centrifuge is supplied with the 18 place rotor for 1.5/2.0 ml tubes. Features and Functions:- • Microprocessor with large LCD display • Electrical lid lock • Quick access to samples • Active imbalance identification and cut-off • Air Cooling System • Quick Acceleration and Deceleration • Noise level < 67 dBA, at max. speed • Easy removal of rotor • Manufactured in accordance to International • Safety Regulations, i.e. IEC 61010 Display functions • Control panel with Touch-Operation • Simple one-handed operation • Splash-proof foil keyboard • Permanent indication of pre-set and actual values • Selection of speed in both rpm and g-force, in increments of 10 • 10 acceleration and deceleration rates, possibility of unbraked deceleration • Pre-selection of the running time, from 10 s to 99 h 59 min or continuous • Storage of up to 99 runs • Quick-key for short runs • Color visual representation of the operating state such as standstill, sleep mode or centrifugation |
Centrifuge Z 446 KThese high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.
If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml.
The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.
Display functions | Centrifuge Z 446These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.
If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml.
The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.
Display functions | Centrifuge Z 366 KThese universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.
Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 24325 xg, making these table top centrifuge Z 366 K into a universal high-powered centrifuge.
Display functions | Centrifuge Z 366These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.
Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 21379 xg, making these table top centrifuge Z 366 into a universal high-powered centrifuge.
Display functions |
Centrifuge Z 36 HKThe Z 36 HK is the culmination of many years of centrifuge design experience combined with the latest technology.
Featuring speeds up to 30000 rpm (65395 xg) with ten available rotor options, the Z 36 HK is the most capable centrifuge in its class.
Display functions | Centrifuge Z 32 HKWith a wide range of accessories, the Z 32 HK high speed centrifuge is applicable in a wide variety of research settings.
In spite of remarkably small footprint, the Z 32 HK features a powerful refrigeration system capable of maintaining cool sample temperatures even at maximum speed.
Display functions | ||
Centrifuge ZK 496The ZK 496 is a large volume floor-standing centrifuge, which is also available as a space - saving underbench model. Both models are provided with a powerful cooling system to keep your samples cool.
Its huge volume of charge allows a large number of samples to be centrifuged, up to 4 x 1000 ml. The field of application of the ZK 496 ranges from clinical applications through research to industrial applications, but also in blood banks, where blood bags are used.
In additional to the multifunctional swing out rotor, high-speed fixed angle rotors with a maximum capacity of 6 x 250 ml or 4 x 500 ml are also available! This enables a fast and efficient separation of samples in high-throughput laboratories.
Display functions | |||
Centrifuge Sieva 3The new unique Filtration Centrifuge SIEVA-3 is the advancement of our Centrifuge SIEVA-2.
By an opening in the lid it is possible to fill the centrifugal basket during rotation. The solids remain in the centrifugal basket and the liquid can run off through a opening on the right side. The inspection window in the centrifuge lid is made of safety glass and enables a visual monitoring of the centrifugation. The SIEVA-3 is very versatile and suitable for various applications. The cmplete housing is made of stainless steel and is therefore also resistant to highly corrosive agents. The operating principle of this centrifuge is the cake filtration, the filtration in which the required pressure force is generated in the centrifugal field. The perforated rotor is lined with a filter cloth. Due to the continuous inflow of the suspension, a filter cake builds up in the rotor, while the clarified liquid drains through the rotor casing or on the edge of the basket.
The filtration centrifuge Sieva-3 is mainly used for batch separation of relatively coarse particles or crystalline substances.
Display functions | |||
Centrifuge OLEUMAs a compact table top unit, the OLEUM centrifuge is used for oil test methods. Therefore, water content in the mineral oil is examinated. The OLEUM centrifuge comes with a four place swing out rotor which accomodates cushions for oil test tubes according to ASTM: Conical or Pearshaped form. Features and Functions:- • Microprocessor with large LCD display • Brushless induction drive • Motor driven lid lock • Audible signal at the end of each run • Quick access to samples • Active imbalance identifi cation and cut-off • Noise level < 55 dBA, at max. speed • Easy removal of rotor, without tools • Emergency lid lock • Stainless steel chamber • Safety Regulations, i.e. IEC 61010 Display functions • Diagnostic program • Program memory for 99 programs • Quick-key for short runs • 10 acceleration and 10 deceleration rates • possibility of unbreaked deceleration • Permanent indication of preset and actual values • Pre-selection of speed or RCF in steps of 50/10 increments • Pre-selection of running time from 10 sec to 99h 59min or continious • Simple operation with turning knob | |||