18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832
- Laboratory & Environmental Products
- Process & Engineering Products
- Test & Measurement Products
- FLIR Systems
- Extech Instruments
- Air Flow Meters
- Air Quality Meters
- Automotive Meters
- Battery Testers
- Borescope Cameras / Videoscopes
- Cable Tracers
- Calibrators
- Circuit Identifiers
- Clamp Meters
- Continuity Testers
- Decade Boxes
- Distance Meters
- Electromagnetic Field Meters
- Force Gauges
- Gas Detectors and Analyzers
- Ground Resistance Testers
- Heat Index Meters
- Humidity Meters / Hygrometers
- LCR Meters
- Light Meters
- Magnetic Field Meters
- Megohmeters / Insulation Testers
- Miliohm / Micro-Ohm Meters
- Moisture Meters
- Multimeters
- Oscilloscopes
- Pedometers
- Phase Rotation / Motor Rotation Indicators
- PID Controllers
- Power Analyzers
- Power Supplies
- Pressure Meters / Manometers
- Receptacle Testers and Analyzers
- Refractometers
- Sound Meters / Decibel Meters
- Stopwatches,Timers and Clocks
- Tachometers
- Thermometers
- Thickness Gauges
- Vibration Meters
- Voltage Testers and Current Testers
- Water Quality Meters
- View All
- SBS Storage Battery Systems
- Triplett Test Equipment & Tools
- Borescopes & Inspection Cameras
- Laser Distance Meters
- Photo & Contact Tachometers
- Manometers
- CO & CO2 Meters
- Formaldahyde Meters
- Combustible Gas Detectors
- Humidity Indicators & Meters
- Non-Contact & Contact Thermometers
- Light Meters
- Sound & Noise Level Meters
- Anemometers
- Hygro-Thermometers
- PH and Conductivity Meters
- Analog Multimeters - VOM
- Clamp-On Multimeters
- Railroad VOM Test Sets
- Voltage & Current Dataloggers
- Magnetic Field Testers
- AC Voltage Detector
- Continuity Testers
- Test Leads
- Cases
- GFCI Receptacle Testers
- AC Line Splitters
- Non-Contact Voltage Testers
- Mehohmmeters - Insulation Testers
- Live Wire Tone & Probe Kit
- Power Over Coax
- View All
- Planck Vision Systems
- View All
- Oil & Gas Products
LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
Clamp-On Multimeters
 UNIVERSAL CASE FITS STANDARD OR COMPACT SIZED MULTIMETERS AND CLAMP-ONS WITH TEST LEADS (10-4295)Zippered canvas pouch for use with most Triplett DMM and 310 testers. Dimensions: L:8'' x W:5.5'' x D:1.75'' |  200A TRUE RMS OPEN JAW CLAMP METER (CM200)
The Triplett Model CM200 True RMS Open Jaw Clamp Meter can measure AC current up to 200A without breaking the circuit and fits into tight spaces where a standard clamp meter jaw is unable to close. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Diode Test, and Continuity. Measurements can read on the 6000 count, reverse polarity LCD. Features include: a built-n NCV Detector with LED, LoZ (impedance) mode for identifying ghost voltages, Min/Max for recording the highest and lowest readings, Auto power off with disable, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. Includes 2 AA batteries, test leads, and carrying case.
CM200-NIST Comes with Certificate of traceability to NIST standards |  600A TRUE RMS AC CLAMP METER (CM600)
The Triplett Model CM600 True RMS Clampmeter can measure AC current up to 600A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 4000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT III-600V safety category. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.
|  1000A TRUE RMS AC CLAMP METER (CM1000)
The Triplett Model CM1000 True RMS Clampmeter can measure AC current up to 1000A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 6000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Lo Z (impedance) mode for identifying ghost voltages, Low Pass FIlter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives, Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.
CM1000-NIST comes with Certificate of Traceability to N.I.S.T. |
 600A TRUE RMS AC/DC CLAMP METER (CM650)
The Triplett Model CM650 True RMS Clampmeter can measure AC and DC current up to 600A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 4000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT III-600V safety category. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case
|  400A TRUE RMS AC CLAMP METER (CM400)
The Triplett Model CM400 True RMS Clampmeter can measure AC current up to 400A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 4000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT III-600V safety category. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.
CM400-NIST Comes with Certificate of traceability to NIST standards |  400A TRUE RMS AC/DC CLAMP METER (CM450)
The Triplett Model CM450 True RMS Clampmeter can measure AC and DC current up to 400A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 4000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT III-600V safety category. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.
CM450-NIST Comes with Certificate of traceability to NIST standards |  1000A TRUE RMS AC/DC CLAMP METER (CM1050)
The Triplett Model CM1050 True RMS Clampmeter can measure AC and DC current up to 1000A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 6000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Lo Z (impedance) mode for identifying ghost voltages, Low Pass FIlter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives, Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.
CM1000-NIST comes with Certificate of Traceability to N.I.S.T. |
 3 ¾ DIGIT 6000 COUNT TRUE RMS 1000A AC/DC CLAMP-ON METER : 28 RANGES, CAT III 600V - (9325)
The Triplett Model 9325 is a 3 3/4 (6000 count) 1000A True RMS AC/DC clamp-on meter with a backlit LCD display. It offers a large variety of measurement features including AC/DC Current, AC/DC Voltage, Resistance, Temperature, Capacitance, Continuity, Diode Test and NCV Detector. The rubberized overmolded housing provides impact and drop resistance in a sleek ergonomic design, and the user-friendly Auto Power Off feature helps maximizes battery life. With a CAT III 600V design, it provides superior resistance to damage from transient overvoltages in any demanding industrial setting. The Model 9325 is suited for a variety of industrial and residential applications such as security, electrical, HVAC installations and more. Includes test leads, Type K Temperature probe, 9V battery, and case.
9325-NIST Comes with Certificate of traceability to NIST standards |  400A TRUE RMS AC/DC MINIATURE CLAMP MULTIMETER WITH IN-RUSH - (CM24)
The Triplett Model CM24 True RMS Mini Clamp Meter can measure AC and DC current to up 400A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Measurements can read on the 4000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Additional features include: a built-in NCV detector with LED, DC zero function, overrange indication, and Auto power off. Data Hold freezes the display for easy viewing. CAT III-300V safety category. Includes 2 AAA batteries.
CM24-NIST Comes with Certificate of traceability to NIST standards |  3 ¾ DIGIT 4000 COUNT MINIATURE 300A AC CLAMP-ON METER: CAT III 300V - (9200)
The Triplett 9200 is a 3 3/4 (4000 count) mini AC digital clamp-on meter with a large display. It measures 300A True RMS AC Current and features a Data Hold function. Built-in non-contact AC Voltage tester. The ABS plastic housing provides impact and drop resistance in a sleek ergonomic design, and the user-friendly Auto Ranging helps maximize results. With an industry standard CAT III 300V design it provides resistance to damage from transient overvoltages in any demanding settings. The Model 9200B is suited for a variety of commercial and residential applications such as security, electrical, HVAC installations and more. Includes wrist strap, 2 x 1.5V AAA batteries and case.
9200B-NIST Comes with Certificate of traceability to NIST standards |