18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
49 - 64 of 64 | |||
Extech 881602 Type K Surface Probe (-40 to 932¡ãF)Type K high temperature probe with mini connector
The 881602 is a Type K Surface Probe. For use with any meter that has a Type K connector
| Extech 881616 Magnetized Type K Surface Probe (-40 to 482¡ãF)Type K temperature probe with mini connector
The 881616 is a Type K Magnetic Grill Temperature Probe. For use with any meter that has a Type K connector. This grill temperature probe features a temperature range from -40 to 482°F (-40 to 250°C). Comes with a 6 month warranty.
| Extech CA3010 3000A AC Flex Clamp-on Adaptor10'' Flexible Clamp Adaptor for Multimeters/Clamp-On Meters
The CA3010 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3010 is a 10 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating.
| Extech 480172 AC Line SplitterAllows clamp meter to measure AC Current on a 2-wire or 3-wire power cord
This Extech 480172 Line Splitter provides a fast and easy way to “open” standard 120 Volt AC electrical lines, eliminating the need to cut off the plug and separate the conductors. When connected between a 120 Volt AC outlet and a device under test, this splitter separates the hot/live conductor from the neutral and ground, which enables users to measure AC current up to 15 Amp on a two-wire or three-wire lines using a clamp meter. This splitter also features two Voltage Test jacks so that voltage can be measured using a multimeter.
|
Extech CA3018 3000A AC Flex Clamp-on Adaptor18'' Flexible Clamp Adaptor for Multimeters/Clamp-On Meters
The CA3018 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3018 is an 18 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating.
| Extech CA500 Medium Carrying CaseSoft vinyl carrying case (6.7 x 3.8 x 2.3'') with shoulder strap and side pocketsThe CA500 is a protective medium sized vinyl carrying case. Protects meters and accessories from dirt and debris. Comes with a 6 month warranty. The CA500 is versatile and features a belt loop and shoulder strap.
| Extech CA899 Large Carrying CaseSoft vinyl carrying case (9.6 x 5.3 x 3.1'') with shoulder strap
The CA899 is a Large Protective Carrying Case. For use with Extech test meters and accessories. Comes with a 6 month warranty. The CA895 is versatile and features a belt loop and shoulder strap for hands free carry. | Extech CA900 Wide Carrying Case for MultiMeter KitsSoft vinyl carrying case (9.5 x 7.2 x 2.9'') with wrist strapThe CA900 is a Wide Protective Carrying Case. For use with Extech multi-meter kits and accessories. Comes with a 6 month warranty. The CA900 features a wrist strap for safe carry of your Extech Test meters.
|
Extech CA904 Hard Plastic Carrying CaseCarrying case (11.7 x 8.9 x 3'') with foam insert and accessories pouchThe CA904 is a Hard Protective Carrying Case. For use with your Extech Exstik Series meters and accessories. This product comes with a year warranty. The CA904 features a sturdy handle and a removable foam insulation.
| Extech TP200 Type K Pipe Clamp Temperature Probe (-4 to 200¡ãF)Hands-free superheat/subcooling temperature measurementThe Extech TP200 Type K Pipe Clamp Temperature Probe produces a hands-free, super heat and sub cooling temperature measurement. The spring-loaded jaw is for a secure grip on pipes from 0.25 inches (6.35mm) to 1.5 inches (38mm) in diameter. This probe is for use with any thermometer or multimeter with a Type K thermocouple input. The measurement range is from -4 to 200°F (-20 to 93°C) with and accuracy of ±3.6°F (1.8°C). The Extech TP200 Type K Pipe Clamp Temperature Probe comes complete with an attached 36 inch (0.9m) cable and a Type K connector.
| Extech TP400 High Temperature Type K Pipe Clamp (-4 to 450¡ãF)Hands-free superheat/subcooling temperature measurement
The Extech TP400 Type K High Temperature Pipe Clamp Probe produces a hands-free, super heat and sub cooling temperature measurement. The spring-loaded jaw is for a secure grip on pipes from 0.25 inches (6.35mm) to 1.5 inches (38mm) in diameter. This probe is for use with any thermometer or multimeter with a Type K thermocouple input. The measurement range is from -4 to 450°F (-20 to 232°C) with an accuracy of ±3.6°F (1.8°C).
| Extech TP870 Bead Wire Type K Temperature Probe (-40 to 482¡ãF)Type K temperature probe with mini connector
The TP870 is a Type K temperature probe with mini connector and temperature range from -40 to 250-Degrees C. This type K mini connector is compatible with most meters that have Type K temperature function.
|
Extech TP873 Bead Wire Type K Temperature Probe (-22 to 572¡ãF)Type K temperature probe with mini connector and banana plug adaptorThe TP873 is a Bead Wire Type K Temperature Probe. Compatible with most test instruments that have a Type K Temperature input. Comes with a 6 month warranty.
| Extech TP873-5M Extra Long Bead Wire Type K Temperature Probe (-22 to 572¡ãF)Type K temperature probe with mini connector and banana plug adaptorThe TP873-5M is an extra-long bead wire type K temperature probe. The TP873-5M is a 5 meter long temperature probe with a mini connector and banana plug adaptor. Comes with a six month warranty.
| Extech TP875 Bead Wire Type K Temperature Probe (-58 to 1000¡ãF)Type K high temperature probe with mini connector and banana plug adaptor
Extech's TP875 is a bead wire temperature probe. This Type K thermocouple probe measures from -58 to 1000°F (-50 to 538°C) with a subminiature (mini-ANSI) connector. Compatible with most meters that have Type K temperature function.
| Extech TP882 Type K Penetration Probe (-50 to 1000¡ãF)Type K high temperature probe with mini connectorExtech's TP882 is a penetration temperature probe. This Type K probe measures from -50 to 1000°F (-46 to 538°C) with a subminiature (mini-ANSI) connector. Compatible with most meters that have Type K temperature function.
|
49 - 64 of 64 |