10-Function DMM with NCV plus Non-Contact AC Voltage Detector

Compact True RMS multimeter includes a free Non-contact Voltage Detector (NCV)! Ideal for troubleshooting appliances, electrical wiring, automotive repair and electronic devices.

• MN62 - True RMS Multimeter:
  • True RMS for accurate readings of noisy, distorted or non-sinusoidal waveform
  • VFC Low pass filter for accurate measurement of variable frequency drive signals
  • 10 functions including Frequency and Capacitance
  • Built-in non-contact voltage detection with audible beeper indication
  • CAT III-600V category safety rating
• DV23 - AC Voltage Detector:
  • Safely determine if wires are hot or not
  • Non-Contact AC Voltage detection from 50 to 600V, 50/60Hz
  • Audible and visual red LED light indicator
  • Convenient built-in pocket clip
  • Suitable for testing AC outlets, power cords and branch circuits
  • CAT IV-600V category safety rating
  • Complete with two AAA batteries

Auto/Manual Ranging Pen Multimeter with Non-Contact Voltage Detector

The Extech 381676A is a Pen Styled Multimeter with a Built in NCV detector. The 381676A features nine functions including AC/DC voltage to 600V, AC/DC Current to 200mA, Resistance, as well as Logic, Diode and Continuity tests. This meter has an easy to use rotary dial with alligator clips for one handed operation. Its convenient built in non-contact voltage detector allows for quick detection of live voltage. The 381676 comes complete with test leads, alligator clips, batteries and manual.

• Auto/Manual ranging pen-style multimeter
• Large 2000 count high contrast LCD display
• Built-in Non-Contact Voltage (NCV) detection with visible and audible alarm
• Data Hold, Range Hold, Maximum Hold, Auto Power Off
• Overrange and low battery indication
• Ergonomic housing with easy one-hand operation rotary function dial
• Complete with test leads (one built-in tip and one remote with cable), two alligator clips, and 2 AAA batteries

Autoranging DMM with NCV Detector and built-in Flashlight

This Mini Pocket MultiMeter has a large high contrast 4000 count LCD display, Non-Contact Voltage detection for identifying live circuits, and a built-in Flashlight. It measures AC/DC Voltage, AC/DC Current, Resistance, Frequency, Duty Cycle, Diode Test and has a Continuity Beeper. Additional features include: built-in storage clips for integrated test leads, double molded housing to provide extra protection, over-range and low battery indication. Complete with test leads and 2 AAA batteries.

• Large high contrast 4000 count LCD display
• Non-Contact Voltage detection identifies live circuits
• Built-in Flashlight
• Measures AC/DC Voltage, AC/DC Current and Resistance, Frequency and Duty Cycle
• Diode Test and Continuity Beeper
• Built-in storage clips for integrated test leads
• Double molded housing provides extra protection
• Over-range and low battery indication
• Complete with test leads and two AAA batteries

Manual ranging DMM with NCV detector and battery test function

The EX310 is a compact manual ranging multi meter which features an extra-large 2000 count display and built-in non-contact AC voltage detector (NCV). AC/DC Voltage & Current, Resistance, Diode/Continuity measurements. Includes battery test function (1.5 Volt and 9 Volt). Rubber holster protects the meter. UL listed Cat III – 600 Volt safety rating. Includes test leads, 9 Volt battery and tilt stand.

• Manual ranging DMM with 9 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Battery test function for 1.5V and 9V batteries
• Large-digit 2,000 count LCD display
• 10A max Current
• Low battery indicator
• Complete with test leads, tilt stand, protective holster and 9V battery

Autoranging DMM with NCV detector

The Extech EX320, a compact auto ranging multi meter, features extra-large 2000 count display and built-in non-contact AC Voltage detector. Continuity, diode test and Max Hold functions. AC/DC Voltage & Current, and Resistance measurements. Rubber holster protects meter. UL listed Cat III – 600 Volt. Includes test leads, two AA batteries and tilt stand.

• Autoranging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 2,000 count LCD display
• 10A max Current
• Max Hold, Data Hold, Relative and Auto power off
• Complete with test leads, tilt stand, protective holster and 2 AAA batteries

Autoranging DMM with NCV detector and Temperature function

The EX330 is a compact autoranging multimeter which features extra large 4000 count display and a built-in non-contact AC voltage detector. Advanced function include Frequency, Duty Cycle, Capacitance and Temperature, Diode test and continuity. Rubber holster protects meter. Includes test leads, Type K temperature probe, two AAA batteries and tilt stand.

• Autoranging DMM with 12 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 4,000 count LCD display
• 10A max Current
• Data Hold, Relative and Auto power off
• Type K temperature measurements
• Complete with test leads, tilt stand, protective holster, general purpose Type K bead wire probe and 2 AAA batteries

True RMS, autoranging DMM with large digit LCD display and temperature function

The Extech EX430A True RMS Autoranging Multimeter (with K Type, Capacitance, Frequency, and Duty Cycle) is a professional grade True RMS multimeter capable of performing a wide range of measurements. Functions include AC and DC voltage to 600V, AC and DC current to 10A, resistance to 40MOhm, continuity and diode test. Also includes a Type K thermometer function for contact or air temperature measurements from -4 to 1832°F (-20 to 750°C). Advanced functions include Capacitance, Frequency and Duty Cycle. The meter comes complete with test leads, Type K temperature probe, 9V battery, protective holster, adjustable tilt stand and Velcro hanging strap.

• True RMS DMM with 11 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
• Input fuse protection and mis-connection warning
• 10A max Current
• Type K temperature measurements
• Data hold, Relative, Auto power off
• Large-digit backlit LCD
• Complete with CAT III test leads, tilt stand, protective holster, velcro hanging strap, Type K bead wire temp probe and 9V battery

True RMS, autoranging DMM with large digit LCD display and Type-K/IR temperature function

The Extech EX470A True RMS Multimeter and Infrared Thermometer with Capacitance, Frequency, and Duty Cycle Measurements and 2 K-Type Remote Probes is the perfect meter for HVAC or plant maintenance. The IR thermometer measures the surface temperature from -4 to 518 °F (-20 to 270 °C) without contact. The built-in laser pointer centers the measuring area. Multimeter functions include AC and DC Voltage to 600 Volt, AC and DC current to 10A, resistance to 40MOhm, continuity and diode test. Also includes Type K thermometer for contact or air temperature measurements from -4 to 1832 °F (-20 to 750 °C). Advanced functions include Capacitance, Frequency and Duty Cycle. The meter comes complete with test leads, Type K temperature probe, 9 Volt battery, protective holster, adjustable tilt stand and Velcro hanging strap.

• True RMS DMM with 12 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Type-K & IR Temperature, Diode/Continuity, Duty Cycle
• Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity
• Input fuse protection and mis-connection warning
• 10A max Current
• Type K temperature measurements
• Data hold, Relative, Auto power off
• Large-digit backlit LCD
• Complete with CAT III test leads, tilt stand, protective holster, velcro hanging strap, Type K bead wire temp probe and 9V battery

Compact size manual ranging multimeter with 7 functions

• Large 2000 count LCD display
• Measures CD/DC Voltage, DC Current and Resistance
• 1.5V and 9V Battery Tests under load
• Diode and Continuity functions
• 10A fuse protection
• Overload protection and indication
• Includes 9V battery and test leads
• MN24 is not for individual sale. Sold as a part of MN24-KIT only!

Compact Manual ranging multimeters with 8 functions including Temperature

The MN35 is a convenient mini size multimeter with protective rubber holster and tilt stand. Manual ranging, measures AC and DC Voltage to 600V, Resistance with Continuity and Diode functions, DC Current to 10A, Temperature, and 9V/1.5V Battery test. Includes protective rubber holster, 9V battery, test leads and Type K thermocouple probe.

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode
• 1.5V and 9V Battery test function
• Convenient mini size with protective rubber holster and tilt stand
• Data Hold locks reading in the display
• Includes protective rubber holster, 9V battery, bead wire Type K temp. probe and test leads

Compact Autoranging multimeters with 10 functions including Temperature

The Extech MN36 digital multimeter is compact but still packed with features. Capable of measuring AC and DC voltage up to 600 volts, the MN36 is autoranging, which means it automatically displays readings with the proper decimal place location and maximum resolution. Comes with protective rubber holster, 2xAAA batteries, bead wire Type K temp. probe and test leads.

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Capacitance, Frequency, Type K Temperature, Continuity/Diode
• Convenient mini size with protective rubber holster and tilt stand
• Data Hold locks reading in the display
• Includes protective rubber holster, 2xAAA batteries, bead wire Type K temp. probe and test leads

Professional DMM with Non-Contact Voltage Detector, Low Impedance and Low Pass Filter

The EX350 is a professional DMM loaded with advanced features and functions. Low Impedance (LoZ) mode eliminates false readings caused by ghost voltages. Low Pass Filter (LPF)attenuates high frequencies to reduce noise for accurate readings. True RMS provides accurate readings when measuring distorted or noisy waveforms. Built-in Non-Contact AC Voltage Detector quickly checks for the presence of AC Voltage before testing. Features a 4000 count LCD display, data hold, min-max, relative mode, capacitance zero, auto power off, continuity and diode test. This meter will measure AC/DC voltage to 600 V and AC/DC current to 10 amps. Complete with test leads, manual and two AA batteries.

• True RMS for accurate AC measurements
• 4000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals
• Built-in non-contact voltage detector (NCV) with LED indicator
• Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode Test, Continuity
• Data Hold, Min/Max/Max-Min, Auto Power Off
• Relative Mode for Capacitance Zero and offset adjustment
• Complete with test leads and two AAA batteries

Professional DMM with Non-Contact Voltage Detector, Low Impedance, Low Pass Filter and Temperature

The EX355 is a professional DMM loaded with advanced features and functions. Low Impedance (LoZ) mode eliminates false readings caused by ghost voltages. Low Pass Filter (LPF)attenuates high frequencies to reduce noise for accurate readings. True RMS provides accurate readings when measuring distorted or noisy waveforms. Built-in Non-Contact AC Voltage Detector quickly checks for the presence of AC Voltage before testing. Features a 6000 count LCD display, data hold, min-max, relative mode, capacitance zero, auto power off, continuity and diode test. This meter will measure AC/DC voltage to 600 V and AC/DC current to 10 amps. Complete with test leads, general purpose bead wire temperature probe, manual and two AA batteries.

• True RMS for accurate AC measurements
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals
• Built-in non-contact voltage detector (NCV) with LED indicator
• Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Diode Test, Continuity
• Data Hold, Min/Max/Max-Min, Auto Power Off
• Relative Mode for Capacitance Zero and offset adjustment
• Complete with test leads, two AAA batteries and general purpose bead wire temperature probe

Electrical Multimeter with Non-Contact Voltage Detector

The EX360 is a Compact Electrical True RMS MultiMeter with a Built in Non Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40MΩ, continuity beeper with visual alert, smart data hold, peak hold, auto power off with disable, relative mode for capacitance zero and offset adjustment. Additionally, the EX360 excels in frequency and capacitance measurement. Complete with test leads, 9V battery, holster with tilt stand and built-in magnet.

• Ideal for Electrical application
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, Resistance, Capacitance, Frequency, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends
• LoZ prevents false readings caused by ghost voltages
• Built-in Non-contact AC Voltage Detector (NCV) with Hi/Low ranges and LED indicator
• Smart Data Hold, Peak Hold, Auto Power off
• Complete with test leads, 9V battery, holster with tilt stand and built-in magnet

HVAC Multimeter with Non-Contact Voltage Detector & Type-K Temperature function

The EX363 is a Compact HVAC True RMS MultiMeter with a Built in Non Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40MΩ, continuity beeper with visual alert, smart data hold, peak hold, auto power off with disable, relative mode for capacitance zero and offset adjustment. Additionally, the EX363 excels in HVAC flame rod measurements with a µA function, as well as Type K Temperature measurements from -40 to 742°F (-40 to 394°C) and Frequency and Capacitance measurements. Complete with test leads, 9V battery, holster with tilt stand, general purpose bead wire temperature probe and built-in magnet.

• Ideal for HVAC applications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC micro Current, Resistance, Capacitance, Frequency, Type-K Temperature, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends
• LoZ prevents false readings caused by ghost voltages
• Built-in Non-contact AC Voltage Detector (NCV) with Hi/Low ranges and LED indicator
• Smart Data Hold, Peak Hold, Auto Power off
• Complete with test leads, 9V battery, holster with tilt stand and built-in magnet, and general purpose bead wire temperature probe

Industrial Multimeter with Non-Contact Voltage Detector

The EX365 is a Compact Industrial True RMS MultiMeter with a Built in Non Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40MΩ, continuity beeper with visual alert, smart data hold, peak hold, auto power off with disable, relative mode for capacitance zero and offset adjustment. Additionally, the EX365 excels in frequency and capacitance measurements as well as commercial applications which require AC/DC current measurements from 1 mA to 10A. Complete with test leads, 9V battery, holster with tilt stand and built-in magnet.

• Ideal for Industrial/Commercial appplications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends
• LoZ prevents false readings caused by ghost voltages
• Built-in Non-contact AC Voltage Detector (NCV) with Hi/Low ranges and LED indicator
• Smart Data Hold, Peak Hold, Auto Power off
• Complete with test leads, 9V battery, holster with tilt stand and built-in magnet

Averaging DMM with 4,000 count large LCD display and waterproof housing

The EX503 offers an array of must-have multimeter measurements including capacitance, frequency (dual sensitivity for electrical and electronic applications), diode test and continuity. Other features include Data Hold and Relative Hold, and manual- or auto-ranging modes. The latter automatically adjusts the measurement range based on the detected source such as electrical components and electronic equipment. The meter features 0.5 percent accuracy and a CAT IV-600-volt safety rating, protecting users even on outdoor wiring. Includes EX503 heavy-duty digital multimeter, double-molded test leads, magnetic hanging strap, 9-volt battery, carrying case, and user manual.

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current
• Data hold, Relative, Auto power off
• 4,000 count large backlit LCD
• Double molded housing for waterproof protection
• Complete with double molded test leads, magnetic hanging strap, carrying case and 9V battery

True RMS DMM with 6,000 count large LCD display, temperature function and waterproof housing

Designed to withstand harsh environments and usage, the meter's rugged, double-molded housing is IP67-rated (waterproof and dustproof) and drop-tested to 6 ft. The large, illuminated LCD displays 4-digit readout (to 6,000 counts). The EX520 offers various must-have measurements. The meter features 0.09 percent accuracy and a CAT IV 600-volt safety rating, protecting users even on outdoor wiring. Product includes a 3 year warranty, double molded test leads, 9V battery, magnetic hanging strap, temperature probe and carrying case.

• True RMS DMM with 11 functions and 0.09% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current
• MIN/MAX, Data hold, Relative, Auto power off
• 6,000 count large backlit LCD with bargraph
• Double molded housing for waterproof protection
• Complete with double molded test leads, magnetic hanging strap, Type K bead wire temp probe, carrying case and 9V battery

True RMS DMM with 40,000 count large LCD display, temperature function and waterproof housing

Ruggedly designed and waterproof to IP67 standards, the EX530 is ideal for use in the outdoors, on boats, and in any harsh industrial environment. It has a double molded housing and is drop-proof up to six feet with a safety rating of CAT IV 600 Volt and CAT III 1000 Volt. It measures AC/DC voltage and current, resistance, capacitance, electronic and electrical frequency, temperature, 4 to 20 mA, and duty cycle. Additional features include: 0.06% basic accuracy, continuity beeper, diode test (2.8 Volt open circuit voltage), 40000 count resolutions, backlit LCD with barograph, peak hold, min/max, relative mode, data hold and 1000 Volt input protection for all functions. Comes complete with double-molded test leads, type K bead wire temperature probe (-4 to 482 degrees F/-20 to 250 degrees C), magnetic hanging strap, case, and a 9v battery.

• True RMS DMM with 11 functions and 0.06% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current
• MIN/MAX, Data hold, Relative, Auto power off
• 40,000 count large backlit LCD with bargraph
• Double molded housing for waterproof protection
• Complete with double molded test leads, magnetic hanging strap, Type K bead wire temp probe, carrying case and 9V battery

Transmits key electrical readings to Android™ mobile devices

The GX900 is a True RMS Graphical MultiMate with Bluetooth which transmits key electrical readings to Android mobile devices. The GX900 measures AC/DC current and voltage, resistance, capacitance, frequency, temperature, duty cycle, conductance, RPM, ACV bandwidth and diode continuity. The GX900 features a 50,000 count display with bargraph, a free Android app, data logging (to 2500 readings), Windows compatible software, peak hold, min/max/average modes, relative (%), data hold, automatic data hold and auto power off. Meter comes with double molded test leads, hanging strap, Type K bead wire temperature probe, PC software, and six AA batteries.

• Integrated Bluetooth® connects with most Android devices to transmit readings for remote viewing
• Works with free Android App to display large, easy-to-read values up to 30ft (10m) away
• Low Pass Filter conditions the inputs to provide accurate Voltage and Frequency readings on motors, drives and other large electrical equipment that generate electrical noise
• Datalogging stores up to 2500 readings with date and time stamp
• Windows® compatible software included for wireless transfer of logged data or recording data in real time
• True RMS measurements for accurate AC Voltage and Current measurements
• Dual sensitivity frequency functions
• Peak Hold (>1ms) Min/Max/Average / Relative (%) / Data Hold / Automatic Data Hold / Auto power off
• Backlit graphical dot matrix display allows for customized screens to optimize critical data within a measurement mode and provide visual menus for easy navigation to settings and ranges
• Complete with double molded test leads, hanging strap, Type K bead wire temperature probe, PC software, and six AA batteries

Spring loaded clip with steel jaws

The Extech TL740 Industrial Plunger Style Test Clip Set includes a spring loaded clip with steel jaws. It has a jaw opening of 0.6 inches and an overall length of 6.1 inches. This test clip set is rated at 1000V, 10A and CAT III-1000V.

• 1000V, 10A
• 0.6'' (15mm) jaw opening
• 6.1'' (155mm) overall length

Standard test leads with protective tip caps

The Extech TL803 Standard Test Leads have protective tip covers for safety during storage. Standard replacement test leads with shrouded banana connectors and molded strain reliefs. Compatible with most multimeters. The Extech TL803 Standard Test Leads have a 10A capacity and are rated at CAT III-1000V and are UL Listed.
 

• Standard replacement test leads compatible with most multimeters
• Shrouded banana connectors, molded strain reliefs
• Two sharp 0.16'' (4mm) long tips with removable category control tip covers for safe storage

Large double insulated alligator clips with sharp teeth

The TL806 is a set of double insulated alligator clips for use with Extech TL809 or TL810 test leads. CAT III-1000V safety rating. Comes with a 6 month warranty.

• Extra large alligator clips mate with banana plug patch cords
• Jaw opens up to 0.8'' (20mm)
• Sharp teeth for piercing insulated wire
• One end features a 0.16'' (4mm) safety jack
• Complies with the IEC1010 standard

8-piece Kit with CATIII-1000V safety rating and carrying case

The TL808-KIT is an 8-piece Professional Test Lead Kit. Includes large carrying case with wrist strap that provides storage for the kit and additional space for your meter. Comes with CATIII-1000V safety rating and carrying case.

• Two 42'' (1m) PVC lead extensions with shrouded banana plugs at both ends
• Two modular 4'' (102mm) Heavy Duty test probe handles with 0.16'' (4mm) banana plug tips
• Two standard size alligator clips with insulated rubber boot
• Two extra large, double-insulated alligator clips with sharp teeth for piercing insulated wires - jaw opens 0.8'' (20mm)
• Includes carrying case provides storage for the kit and additional space to hold your meter