• Low profile design and small footprint (only 4.3” wide) saves valuable space 
• Made of ABS and silicone materials that resist most commonly used chemicals
• Stable platform and elastomer feet ensure unit stays stable during operation
• When performing repetitive procedures, a low activation force helps prevent user fatigue

• Body made from durable ABS to resist most commonly used chemicals, and is easy to clean
• Fixed variable speed rotary dial provides pre-set speed control (1000, 2000, 3000 rpm) during shaking mode
• Stable elastomeric device feet, provide vibration dampening and prevent movement during operation
• Innovative head can be removed for cleaning purposes
• 3 Position Slider (top) intermittent, (middle) off, (bottom) continuous

• Magnetic stir bar is made from ALNICO, one of the strongest permanent magnets available
• The sintered manufacturing process reduces the chance of decoupling (spin outs), which weaker stir bars often suffer from
• Encapsulation in PTFE protects both magnet and what it is stirring. Chemically inert and easy to clean
• Can withstand temperatures up to 250°C, making them suitable for use with both unheated and heated stirrers
• Low friction octagon shape with a center pivot ring helps create a strong mixing vortex, even with more viscous solutions
• The stir bar retriever can recover stir bars even in hot solutions when stirring and mixing is no longer required
• 120553 Stir Bar Retriever  

• Orbital shaker body is made from durable ABS to resist most commonly used chemicals, and is easy to clean  
• No-stop electronic motor feedback, enables the unit to instantly adjust to weight load changes and unbalanced loads for truly reproducible results
• A high weight loading of 4.5 kg (10 lbs.), with an overload protection shut-off
• Hi-lo platform & bungee cords allows you to create your own holding matrix for vessels of all shapes and sizes
• Suitable for use in incubators and cold rooms within the stated temperature range
• Time and speed can be separately set
• Back-lit display is easy to read
• Soft-start and shut down feature at higher speeds reduces spill instances from full vessels
• Very low start speed for sensitive sample agitation, with a high top end and good stability for more vigorous applications
• Long-life maintenance free motor and drive

• Naturally biodegradable, made from 100% U.S.A grown white birch wood
• Manufactured in an fda-registered factory and comply with FDA standards for food contact
• Available in semi or needle point styles for delicate operations
• Autoclavable
• Disposable

• Holds up to 6 x 100 mm Petri Dishes
• Epoxy-coated steel wire
• Measures 127 x 86 x 107 mm
• Autoclavable

• Sturdy acrylic holds up to 30 x 100 mm dishes in two easy-access partitions
• Bench top or wall mountable (screws provided)
• Measures 222 x 107 x 236 mm

• Use loop end to uniformly streak a gel surface
• Use needle end for removal of colonies
• Choose between flexible polypropylene or the more rigid ABS versions
• Disposable, sterile, 20 per bag with lot-to-lot traceability

• Smyth Sewn binding allows pages to be held in more securely, and for books to lie flat when opened
• Archival-quality pages are numbered, acid-free, pages include spaces for title, date, project number, book number, date, and witness signature
• User data, notebook instructions, table of contents, periodic table, and conversion tables are included in every book
• Keep information Safe with a durable hardbound, water-proof cover
• Easy Identification with a foil stamped title
• Marker Ribbon to keep your place
• 2 Page Formats
  • Grid: 6 x 6 mm grid size
  • Lined
• Measures 218 x 281 mm
• 12 per case

• A full range of volumes and styles available to accommodate required volume of reagents and reduce waste
• “V” shaped well design allows maximum reagent recovery
• Easy to read graduation markings located on the top edge with a fill line on inner walls to indicate volume levels
• Drip free pour-off spouts at every corner for spill free pouring
• Reservoir Chillers are custom fitted for Heathrow Scientific 50 or 100 mL reservoirs to ensure a maximum contact for longer uniform cooling
• Manufactured in a clean room with sterile versions certified as RNase/DNase and pyrogen free
• Designed for multi-channel pipettes and accommodates most common brands
• A wide base ensures stability and tiered wall design prevents deformation when handling and reduces the chance of spills
• A unique nesting design allows easy separation that reduces the chance of warped or damaged product
• Dual reservoir design allows pipetting of two reagents and/or maximizes recovery of small samples
• A full range of volumes and styles available to accommodate required volume of reagents and reduce waste
• Available in polystyrene (PS) or polyvinyl chloride (PVC)
• Bulk and five pack versions come conveniently stacked to help save space when storing
• Free of animal products
• Quality certificate available
• Easy tear packaging makes handling quick and efficient
• Lot numbers indicated on sterile versions

• Two basins in one
• Angled wells guide pipette tips toward a center position to help avoid cross contamination and waste
• Imprinted wells identify samples; loose-fitting lids prevent evaporation and contamination
• Non-sterile
• Volume: 5/50 mL
• Material: Polypropylene
• 125 x 50 x 37 mm
• Pack of 25 reservoirs and 25 lids

• Reagents are kept at less than 5°C (41°F) for approximately 3 hours
• Extends working period and preserves integrity for temperature sensitive reagents
• Engineered custom fit design for Heathrow Scientific 50 or 100 mL reservoirs to ensure a maximum contact for longer uniform cooling
• Ice-free solution eliminates the risk of contamination from messy ice baths
• Stackable, save space when storing in the freezer or on the bench top
• Symmetrical cooler design allows reagent reservoirs to be mounted in either direction
• Assorted packs for color coding options
• Non-toxic blend of water and bacteriostatic agent chills and freezes quickly
• Made from sonic welded, engineered polypropylene that ensures a leak free design
• Not intended for autoclave, do not use with liquid nitrogen 
• Reusable

• The 3⁄8” (10 mm) thick acrylic provides protection from Beta radiation
• The large, hinged lid allows easy disposal of contents
• Suggest using in conjunction with small Biohazard Disposal Bags (page 71), if hazardous fluids are not acrylic friendly
• Measures 154 x 171 x 206 mm

• Instantly creates more working space
• Helps reduce potential cross contamination
• Stops opened microfuge lids from interfering with other wells
• Stackable, with alphanumeric well identifications
• Will fit into standard 2'' (53 mm) freezer racking
• Temperature range -80 to 121ºC

• Ideal for urine containers up to 58 mm dia
• Slotted bottom
• Mesh bottom support
• Chemically-resistant epoxy-coated steel wire racks
• Autoclavable

• Rack suitable for Universal, McCartney and Scintillation vials and low profile tubes up to 33 mm dia
• Available in a 2 x 6 or a 5 x 10 format
• Mesh bottom support
• Chemically-resistant epoxy-coated steel wire racks
• Autoclavable

• Chemically-resistant, HDPE coated wire racks are good to -40° C
• Suitable for conical, round or flat bottom, glass or plastic, tubes and bottles that cannot stand up by themselves
• Two levels of grids help keep bottles secure
• Slotted bottom
• 2 x 3 array
• Wells: 6
• Well Diameter: 64 mm
• Dimensions: 8.1 x 5.3 x 4.1 in (20.5 x 13.5 x 10.4 cm)
• Autoclavable

• Wide bottle mouth makes filling easier
• Non-metallic vent that prevents the risk of solvent leakage
• With the exception of the bottle designed for Sodium Hypochlorite, which is a white LDPE bottle for light protection and has a HDPE closure, the bottles are made from LDPE, with a PP closure
• Six named chemicals, a self labeling and assorted pack of bottles to choose from
• 500 mL bottle size
• Supplied in packs of 6

• Wide bottle mouth makes filling easier
• Color-coding for user, application or location identification
• Bottle is made from LDPE, with a PP closure
• 500 mL bottle size, 
• Supplied in packs of 6

• Translucent acrylic dispensers provide easy access to safety accessories.
• Hinged lid protects glasses from dust and debris
• Set on counter or wall mount (screws included)
• Large Dispenser holds approx. 20 glasses, Small Dispenser approx. 10
• Great for holding other personal items, too!

• Cleanly slice agarose gels* right on the light box without scratching the surface
• Ideal for cutting soft tissue and plant matter
• Adjust the size required by simply cutting with scissors!
• Available in two sizes and made in the USA from food grade PET
• Supplied in packs of 100

• Stackable to reduce storage space before use
• 1.0 L capacity (Quart) with a clear lid to view fill level
• Slide access lid for temporary and final closures for safety and security
• Built-in needle removal port, preventing direct contact with sharps
• Compatible with the Droplet® Blood Collection Tray (see page 44)
• Measures 4.5 x 4.5 x 7.5 in (11.5 x 11.5 x 19.2 cm)
• Pack of 18

• Lightweight easy-to-clean ABS construction
• Comfort grip handle tested to hold up to 10 Kg
• Removable handle allows the tray to be stored flat, saving valuable lab space 
• Comes complete with a 17 mm well 60 place tube rack
• Tray Measures 419 x 311 x 85 mm, handle height 241 mm
• Tube rack 17 mm

• Hazardous/sensitive research samples
• Clinical and Phlebotomy samples
• Blood bags and/or tissue/organ samples
• Public Health samples
• Laboratory instruments
• Biotransport carrier

• Lightweight and sturdy to hold up to 24 full specimen containers (up to 58 mm in diameter). Specimen containers not included.
• Removable insert to allow outer shell to be used for storage or transportation of laboratory products
• Stackable with other trays to support as many as four high
• Integrated label holder and cards to enable easily changed identification
• Able to be cleaned with common disinfectants and germicides.
• Tray dimensions 480 x 331 x 84 mm

• Compact to fit in limited work space areas and easy to transport
• Safe to use—load the foil roll, press the cover to activate the safety guard
• Foam strip prevents foil retracting back into unit
• For use with 102 mm or 153 mm (4 or 6 inch) length foil rolls (sold separately) Foil Roll Item # - HS23534A and HS23536A
• Measures 190 x 100 x 112 mm

EASY APPLICATION WITH NO MESS

• Accommodates two 50 mm (2-inch), or one 100 mm (4-inch) Parafilm® M rolls
• Easy application, simply place the dispenser on top of the Parafilm® M box and pull the sealing film through, there is no need to remove rolls from the packaging
• Built in safety blade slides and cuts with no danger to fingertips and eliminates the need for scissors
• Supplied with two safety blades, additional replacement blades are available for purchase
• Made from ABS plastic making the unit easy to clean
• Item No. 120722 - Replacement blades for Box Top Dispenser 3 ea/pk

HEAVY-DUTY CONSTRUCTION FOR INCREASED VIABILITY & DURABILITY

• Accommodates one or two 50 mm (2-inch) rolls, or one 100 mm (4-inch) roll
• Flexible, can be used to store and dispense Parafilm® M, tape, Tough-Tags®, etc.
• Simply remove rolls from Parafilm® M box and place in the unit
• Lid opens for quick loading of rolls
• Serrated cutting blade cuts without deforming sheets
• Clear dispenser allows users to track when film is getting low, and replace
• Rubber feet to help ensure the unit will not move when dispensing
• Made from durable Acrylic making the unit easy to clean

UNIQUE DESIGN WITH EXTRA STORAGE

• Accommodates one or two 50 mm (2-inch) rolls, or one 100 mm (4-inch) roll
• Flexible, can be used to store and dispense Parafilm® M, tape, Tough-Tags®, etc.
• Simply remove rolls from Parafilm® M box and place in the unit
• Lid opens for quick loading of rolls
• Built in safety blade slides and cuts with no danger to fingertips, eliminates the need for scissors
• Translucent dispenser allows users to track when film is getting low, and replace
• Storage bin on back of the dispenser keeps pens and other small accessories handy
• Translucent colors help prevent film from yellowing
• Supplied with two safety blades, additional replacement blades are available for purchase
• Made from ABS plastic making the unit easy to clean
• Replacement blades are blue

• Durably constructed from solvent resistant polypropylene blend 
• Non-skid Silicone feet keep tray in place

• Two ways to empty stain liquid

• Equipped with handle cut outs for easy handling

• Black lid included for light sensitive applications
• Humidity retention wells for specialized staining needs 

• Made from a polypropylene and polyethylene blend for stability
• Stain, rinse, and dry slides on a single working tray
• A clean and fresh working surface area every time
• Up to eight slides fit comfortably onto the base and the deep well holds up to 38 mL
• 2 convenient Pour Spouts for quick disposal of unwanted liquid waste
• Deep well holds up to 38 mL of liquid
• Dark lid protects slides for light-sensitive applications
• Compact size and recessed handles for easy transport from work area to sink
• Pack of 4 base trays and 1 lid 
• 12 x 5 x 1.2 in (30.5 x 12.7 x 3 cm)
• Disposable

• Clear acrylic construction allows the labels to be seen on the slide boxes
• Place boxes in rows or columns by color to create an easy coding system
• Bins: 15
• Dimensions: 711 x 171 x 228 mm

• Made from chemical-resistant polyethylene
• Solid, strong construction with rubber feet for bench top stability

• Place self-standing rack on a table or near a sink, or use hooks to hang rack on the wall
• Holds up to 90 pieces of labware on 18 x 127 mm pins and 72 x 76 mm pins
• Constructed of spot-welded, vinyl-coated steel wire for durability with polystyrene tray and back
• Easily accessible and removable bottom drainage pan

• Holds up to eight 80-well microtube racks filled with either 1.5 or 2.0 mL microtubes
• Plenty of room to slide the racks in and out

• Protect small and fragile items
• Fit in most standard drawers or store on benches and shelves
• Dimensions:
  • Overall 460 x 307 x 63 mm
  • 3-Compartment Tray - 2 Compartments measure 430 x 80 mm, 1 Compartment measures 430 x 110 mm

• Flip-top covers on generous openings make filling and dispensing easy and keep products dust-free
• 4 sizes available to cater to a wide variety of storage needs
• Includes non-skid rubber feet

• Three channels to count up/down with
• Simultaneous display, time-out, and 60 second audible alarm
• Channels may be started independently or simultaneously
• Timer automatically counts
• 86 x 66 x 22 mm

• Four independent timing channels with visual and audible alarms
• Use as a stopwatch, a count up/down timer, or a clock
• Includes spring clip and magnetic back
• 61 x 71 x 25 mm

• Quick start, quick stop timer features time, split, hourly chime, calendar, alarm
• 100 cm neck cord
• 87 x 78 x 21 mm

• Independently or simultaneously set time on four channels
• Audible and visual alarms signify elapsed time
• Easily toggle between channels and clock with top buttons
• Includes spring clip with magnetic back
• 73 x 59 x 13 mm

• made from polypropylene material
• easy self-assemble boxes shipped flat-packed
• more durable than card boxes as they are not susceptible to moisture
• significantly reduces the chance of mold
• dividers included with the boxes
• store down to temperatures of -80°C
• corrugated polypropylene 0.2/0.5/1.5-2.0/5 mL
• corrugated polypropylene 15 mL and 50 mL

• Hold 15 mL - Wells: 16 - Well Dia: 18 mm OR 50 mL tubes  - Wells: 9 - Well Dia: 31 mm securely upright in deep grid wells
• Locate tubes easily with keyed lid, imprinted grid and first tube orientation
• Use without grids for larger sized product storage
• Fill with ice and use as a temporary low temperature workstation— ideal for teaching labs or those with limited bench space
• Clear lid, translucent sides and autoclavable
• Measures 4.9 x 4.9 x 5 in (12.5 x 12.5 x 12.9 cm)
• Pack of 5
• Color: Purple
• Autoclavable

• Helps reduce potential cross contamination
• Saves valuable working space and allows more room for sample manipulation
• Stops opened microfuge lids with interfering with other wells
• Alphanumeric well identification
• Tube segments sold with the box and lid
• 1 ea, 10 ea/cs

• Made of polypropylene
• Eight segments per box
• 1.5–2.0 mL cryo and micro-centrifuge tubes (64 tubes)
• Wells have a center depression to stabilize conical tubes and a cryogenic vial lock for one-handed cap removal
• Alphanumeric well identification for quick sample ID and retrieval
• Autoclavable

• Made from molded polystyrene
• Holds 15 and 50 mL tubes
• Top inset tray secures tubes in place
• Stackable, saves bench space

• Screw-on polypropylene lids with tpe o-ring
• Clear polypropylene tubes provide excellent view of samples
• Skirted, self-standing base makes filling and retrieval easy
• Frosted writing area
• TPE O-Ring to create an excellent seal for secure storage 
• Autoclavable
• Disposable

• Superior puncture- and rupture-resistance polypropylene with silicon lid seal
• Patented ergonomic lid has 1.5 twist to open and close (US Patent No. D595424)
• Printed writing area and graduations
• Available with color-coded lids (2.0 mL version)
• Inner resealable packs of 50 vials, complete with traceable sterility certifi cate
• Recommended for mechanical freezers and vapor phase LN2 (-196°)
• Sterile, non-pyrogenic and non-cytotoxic
• 2.0 mL vial measures 13 mm dia x 49 mm H, 4.0 mL 13 mm dia x 88 mm H
• Disposable

• Attached flat caps for easy one handed use
• 0.2 ml is suitable for Thermal Cyclers
• 0.5 and 1.5 ml versions have a frosted writing area and a syringe pierceable cap
• 100% virgin polypropylene
• Certified DNase, RNase and Pyrogen free
• Autoclavable 
• Disposable

• Lot-to-lot traceability with easy tear packaging
• Writing area and flat polyethylene lids for easy labelling
• Imprinted graduations and a self-standing version (only in clear bulk pack)
• Reusable card used for the racked versions, making them more environmentally friendly

Easy to Handle 

• Large tabs make boats easy to use, position and hold, especially with forceps

Superb Sample Recovery

• Inert material enables the boat and contents to be added to solutions to aid 100% sample recovery, where protocols allow
• Anti-static properties prevent sample retention from static electricity

• Dimensions 25 x 6.9 x 7.5mm
• Inner Boat Dimensions 15.4 x 6.9 x 7.5 mm
• Holds approx 500 µl

• Ideal for micro-balances, organic micro elementary and thermal analysis and pharmaceuticals
• Made from Ultra High Vacuum (UVH) Foil - ''A'' wettable and completely free from oils normally found on other grades of aluminum foil
• Foil meets ASTM B-479, specification 3.1.4 and 10.3.1
• ''Cahn style'' accessory pan/disc format
• Compatible with most commercially available analyzers and microblaances
• 1 x.1 in (25 x 3.6 mm)
• 20/pk, 5/pk/cs
• Recyclable

• Dishes also make good dust covers for open vessels
• All weigh boats and dishes are FDA/food-grade compliant
• Disposable

• 3 sizes
• Packs of 100