Lasting economy:

• Water purification progresses through independent cartridges with Aquastop quick connects for fast replacement.
• Module 1 reverse osmosis catridges to remove up to 99% of tap water impurities
• Module 2 includes a polishing cartridge that contains high-quality ultrapure resin for consistent purity and long cartridge life.

Easy-to-operate:

• Dispensing is easy and features variable speed to control flow.
• The display can be tilted for optimal reading.
• Simplified User Interface

Placement Options:

• Position on laboratory bench
• Mount it on the wall

New Features:

• Automatic Standby mode when system is not in use recirculates water through system to maintain purity
• Leak detector shuts off water supply and system if leak is detected
• Alerts show on display when to replace consumables
• Reverse osmosis water quality monitoring
• Inline ultrafilter with large surface area to remove endotoxins and nucleases.
• System parameters are code-protected to prevent accidental changes to set points

Smart2Pure Pro offers reservoir options, either 30 or 60L:

• Large opening allows easy and effective cleaning by hand.
• Sterile venting filter/reservoir overflow protects against contamination by microorganisms.
• Optional CO2 absorber prevents TOC value increases from drawn-in CO2.
• Polyethylene reservoir is opaque to light.
• Recirculation pump protects the high purity water from bacterial growth during standstills and maintains the low conductivity value.
• Wall-mount is optional for simple space-savings.
• Conical bottom outlet allows for complete draining and efficient cleaning and disinfection. 

Optional Hand Dispenser:

• Gain increased flexibility by adding a hand dispenser with 3m cord (Part #50138221)

Lasting economy:

• Water purification progresses through independent cartridges with Aquastop quick connects for fast replacement.
• Module 1 offers a combination of pretreatment and the reverse osmosis membrane.
• Module 2 includes a polishing cartridge that contains high-quality ultrapure resin for consistent purity and long cartridge life.

Easy-to-operate:

• Dispensing is easy and features variable speed to control flow.
• The display can be tilted for optimal reading.
• Optional UV bulb and UF ultrafilter are available to customize ultrapure water.

Smart integrated 6L reservoir for the Smart2Pure 3 and 6:

• Constructed with pigment-free materials
• Conical bottom outlet for complete draining and efficient cleaning and disinfection

Smart2Pure 12 offers reservoir options, either 30 or 60L:

• Large opening allows easy and effective cleaning by hand.
• Sterile venting filter/reservoir overflow protects against contamination by microorganisms.
• Optional CO2 absorber prevents TOC value increases from drawn-in CO2.
• Polyethylene reservoir is opaque to light.
• Recirculation pump protects the high purity water from bacterial growth during standstills and maintains the low conductivity value.
• Wall-mount is optional for simple space-savings.
• Conical bottom outlet allows for complete draining and efficient cleaning and disinfection. 

xCAD (Extended Control and Dispenser):

• System provides more flexibility for ultrapure water dispensing with an action radius of 32 in. (80cm).
• Ergonomic dispensing arm provides precise volume dosing at the press of a button.
• Flexible dispenser offers positions including turned, height adjusted or extended toward your vessel.
• One-of-a-kind design provides access to all system controls at your fingertips.

Simultaneously dispense from up to three dispensers:

• Each system ships with a single xCAD Plus remote dispenser.
• For increased flexibility, add one or two more xCAD Plus dispensers.

Integrated feed water monitoring:

• Additional measuring cell monitors feed water conductivity.
• If the quality of the feed water drops below the set value, a fault message will immediately be displayed.

Online TOC measurement with UV intensity monitoring (available on systems with optional TOC only):

• Real-time TOC monitoring offers continual measurement of organic substances present in the water.
• Continuous monitoring of UV intensity removes the risk of false TOC values due to diminished UV intensity.
• Fault message alerts user when the UV lamp intensity is no longer sufficient for accurate TOC measurements.

UV Photo-oxidation 185/254 nm:

• High performance UV assembly reliably reduces the content of microorganisms and their metabolites.
• UV oxidation also reduces organic compounds in the water to ultra-low levels.

Leak detection:

• An error message is displayed when internal leaks are detected.

Ready to use:

• Feed water pressure switch, wall bracket, UV lamp, ultrapure cartridge, sterile filter, all are included in one part number.

Measurement of conductivity/resistivity:

• Conductivity cells are carefully calibrated prior to each measurement via built-in reference resistance with cell constants at 0.01cm-1.
• Temperature measurements are made by a platinum chip sensor with ± 0.1°C accuracy.

Quick-connect cartridge replacement:

• Aquastop quick-connect capability enables cartridge replacement within seconds even mid-operation.

Exact dosing:

• Electronic dosing yields fully automatic volume control of 0.01-65 L with <2% accuracy.

GLP-compliant documentation:

• Real-time clock and code-protected operating system prevents unauthorized changes to system settings.
• RS-232 interface with adjustable send-interval offers safe data transfer of all measured data, faults, date and time to a PC computer or log printer.
• Digital microprocessor control automatically monitors and stores faults from the last four weeks.
• USP-compliant conductivity measurement with temperature compensation can be switched on or off.

• New flexible dispenser offers a radius of 24 in. (60cm) from the system for filling larger vessels or glassware washing.

• An additional measuring cell monitors feed water conductivity. Any exceeding of the limiting value is immediately displayed to maximize cartridge life.

• High performance UV assembly reliably reduces the content of microorganisms and their metabolites.
• UV oxidation also reduces organic compounds in the water to ultra-low levels.

• Feed water pressure switch, wall bracket, UV lamp, ultrapure cartridge, sterile filter, are all included in one part number.
• Leak detection is standard and will alert user to leaks.

• Conductivity cells are carefully calibrated prior to each measurement via built-in reference resistance with cell constants at 0.01 cm-1.
• Temperature measurements are made by a platinum chip sensor with ±0.1°C accuracy.

• High precision POM draw-off valve offers dispensing with sterile filter.
• System offers electronic dosing for fully automatic volume control of 0.01-65.0L with <2% accuracy.

• Real-time clock and code-protected operating system prevents unauthorized changes to system settings.
• System includes RS-232 interface with adjustable send interval for safe data transfer of all measured data, faults, date and time to a PC computer or log printer.
• Digital microprocessor control automatically monitors and stores faults from the last four weeks.
• USP-compliant conductivity measurement with temperature compensation can be switched on or off.

• Ergonomically designed controller tilts for ease-of-use and better visibility
• Panel offers illuminated four-line alpha-numeric display.

ultiple options for Type 2 water:

• Five system options with permeate flows of 3, 7, 12, 20 or 40L/hr.
• Future system upgrades accommodate greater capacities to meet growing water demands
• Space-saving design permits benchtop installation or wall mounting with integrated mounting bracket

Operational reliability:

• Microprocessor controlled for automatic operation with continuous monitoring of all critical parameters
• Automatic return to “operating” mode ensures recirculation during standstill periods
• UV lamp prevents biological contamination (UV models only)

Easy-to-operate

• Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing
• Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” modes
• Reservoir fill-level shown as %
• System parameters are code-protected to prevent accidental changes to set points

GLP-Compliant documentation

• Optional printer connects to RS-232 port for data recording and traceability
• Cell constant of 0.01cm-1 ensures precise conductivity measurements
• Temperature compensation for the conductivity measurement has an accuracy of ±0.1°C (in conformity with USP 645)

Consistent water quality:

• Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards.
• The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity.

Compact mobile design:

• Three system options are available with permeate flows of 20, 40 or 60L/hr.
• Stand-alone design with integrated 100L reservoir takes up zero bench space.
• Castors allow easy relocation.
• Systems can be upgraded later to accommodate growing water demands.

Two ways to dispense water:

• Dispense directly from the system via the dispensing valve for calibration solutions, reagent preparation, filling of containers, general rinsing purposes, etc.
• Dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.

Integrated 100L reservoir:

• Up to 100L of high purity water is ready for dispensing when needed.
• High purity polypropylene reservoir is opaque to light.
• Conical bottom allows complete emptying for efficient cleaning and disinfection.
• Adjustable setting for reservoir volume can be programmed for times when demand is low, allowing you to only store water that you can use.

Clear information on system display:

• The large four-line display is code-protected to prevent accidental changes in system settings.
• Illuminated and easily readable, the display provides information on resistivity or conductivity and operating mode status, such as “roduction”, “stand-by” or sanitization and volume of the reservoir in percent.

GLP-compliant documentation:

• LabTower TII has been developed to meet or exceed GLP requirements.
• Recorded and traceable data can be obtained by print-out via the RS-232 interface and accessory printer.
• Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.01 cm-1 to an accuracy of ±0.1°C.

Pretreatment:

• 5μm prefilter and activated carbon in the combi-filter cartridge protect the RO membrane from free chlorine and particles.
• Hardness stabilizing cartridge protects the reverse osmosis stage from hard water.

Reverse osmosis and reservoir:

• Pretreated water is pressure-forced through the permeable reverse osmosis module removing 97- 99% of all inorganic ions and 99% of dissolved organic substances, as well as microorganisms and particles.
• The built-in 100L reservoir has a conical bottom outlet to optimize cleaning and sanitization.

Ion exchange and UV:

• RO membrane removes up to 99% of impurities. All remaining ions are removed by the low TOC, high-purity resins in the ion exchange cartridge.
• Irradiation with UV light (TII units with UV option only) eliminates any bacteria or germs that are present.

• Contact with only glass, quartz and PTFE components ensures ultimate purity and eliminates cross-contamination.
• Vertical condenser design provides maximum purity.
• High temperature cutoff shuts down the still if the temperature is too high, preventing heating element burnout.
• Quick-release cover provides easy cleaning access.
• Connection to optional Automatic Connection System (ACS) assures a 24-hour automatic system.
• Stills include feedwater solenoid valve for automatic operation.
• Stills produce water with a resistivity of 1 to 10MΩ-cm, depending on feedwater quality.

MP-1:

• Compact, easy-to-use 1L/hr. glass still
• Available with or without a storage bottle

MP-3A, MP-6A and MP-11A:

• For larger volume demands with storage and options (3.4 to 13L/hr.)

MP-12A:

• Features built-in deionizer for pretreated feed to boiler
• Distillate cooler allows product water to be used as it is produced, cooling it from 85°C (185°F) to about 55°C (131°F) for ease of handling
• No need to wait for cooling

• Double-walled boiler and preheating of feed water conserves electricity.
• Vented condenser allows for stripping of gaseous impurities.
• Unique de-concentrator removes scale forming impurities from the boiler.
• Unique Q-Baffle ensures high-quality pyrogen-free water by stripping contaminant laden water droplets from steam.
• Still includes space-saving horizontal condenser.
• Metal construction withstands years of use.
• Inert pure tin pathways assure product water quality.

Portable Stills:

• Require no permanent plumbing or electrical connections allowing for quick setup
• Include low water cutoff for safety protection
• Bench mounted

Floor Model Electric Still:

• Comes standard with floor mounting stand
• Improves safety with new overtemperature protection system
• Allows for easier installation with new plug-and-play hardware
• Processes capacities from 1 to 10 gal./hr.
• Includes low water cutoff that protects heating elements when water supply is interrupted
• Allows for unattended operation with optional fully automatic controls
• Stops still when storage tank is full, starts still when water level falls below preset level
• Drains still boiler at selected two-, four-, eight- and 16-hour intervals to reduce scale formation

Steam Still:

• Utilizes available in-house steam as heat source
• Optional fully automatic controls allow for unattended operation
• Stops still when storage tank is full, starts still when water level falls below preset level
• Drains still boiler at selected two-, four-, eight- and 16-hour intervals to reduce scale formation
• Steam pressure: 35 to 50psi
• Boiler horsepower: 3.5
• Steam flowrate: 90 lb./hr. (41kg/hr.)

Ordering Information:

Automated control systems are available for all stills: G2100 (for 1 gal./hr., 2 gal./hr. models), G2110 (5 gal./hr.), G2125 (10 gal./hr.) and G2010 (10 gal./hr.). Order separately.

This product is not available in all regions.

Includes:

Floor stand (exept for Portable Model A1007).

Requires:

Storage reservoir, UV light assembly and Ventgard Air Filter (order separately)

Recommended for:

Buffer/reagent prep, glassware washing, dishwasher feed

Product Features

• Five system options with permeate flows of 3, 7, 12, or 20, or 40L/hr.
• Space-saving design allows system to sit on the laboratory bench or be mounted on the wall
• Simple system upgrade accommodates future pure water capacity requirements

Reliable operation

• Microprocessor control offers automatic operation with continual monitoring of all important parameters
• Required filling level of the reservoir can be customized
• Automatic return to operating mode ensures recirculation during periods of standstill

Easy-to-operate clear display

• Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing
• Status of current operating mode clearly indicates ''production'', ''stand-by'', ''cleaning'' modes
• Reservoir fill-level shown as %

Integrated feed water monitoring

Good quality feed water is a prerequisite for high purity water and extends cartridge service life

GLP-compliant documentation

Real-time clock records system errors and faults

Ongoing data storage collects four weeks information displayed in clear text

Operating system is code-protected to prevent unauthorized changes to system settings

RS-232 interface with adjustable sender interval allows for customized timing of data transmission of measured values and faults to a PC or data printer

Cell constant of 0.16 cm-1 ensures precise conductivity measurements

Pacific RO pretreatment

Two 10 in. (25.4cm) cartridge filter housings with a 5Glc mum prefilter plus activated carbon to prevent entry of particles greater-than5Glc mum and high concentrations of free chlorinedash (em)includes hardness stabilizer cartridge which binds calcium and prevents its precipitation.

Worry-free pure water storage

Reservoir are constructed of pigment-free polyethylene

Conical bottom allows for easy cleaning, disinfecting and complete emptying

Advanced technology in a mobile design:

• An ultra-modern microprocessor control provides easy-to-read system parameters.
• Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component.
• Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory.
• System is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use.
• A built-in pretreatment unit — consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers and an activated carbon/5μm combi-cartridge — protects the system against free chlorine and particles, ensuring the long service life of downstream purification stages.

Compact and mobile design:

• System includes three system options with permeate flows of 20, 40 or 60L/hr.
• Stand-alone design with integrated 100L tank takes up ZERO bench space—casters allow for easy relocation.
• Systems can be upgraded later to accommodate growing water capacity demands.

Integrated 100L reservoirL

• System stores 100L of RO water in a high-purity polyethylene PE opaque reservoir.
• Adjustable reservoir volume can be programmed for times of low demand—dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.

Easy-to-operate clear display:

• Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing.
• Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” or “disinfection” modes.
• Reservoir fill-level is shown as a percent.
• System parameters are code-protected to prevent accidental changes to set points.

GLP-compliant documentation:

• LabTower RO has been developed to fulfill GLP requirements.
• Recorded and traceable data can be obtained by printout via the RS-232 interface and accessory printer.
• Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm-1.

• Produces up to 4L/min., depending on model
• Quarter-turn quick-release canisters make cartridge changes easy
• Accepts Thermo Scientific Pura-Lite™ indicator or digital purity meter to monitor water quality

Single Module:

• Simple system without draw-off valve or purity indicator
• Produces up to 4L/min.

Double Module:

• Complete with draw-off valve
• Produces up to 4L/min.
• Choose from models with digital purity meter or Pura-Lite “Go/No Go” resistivity indicator

Half-Size Holder:

• Produces up to 2L/min.
• Easily attaches to full-size B-Pure systems
• Small size for flexibility in mounting location

• Light indicator notifies user when it is time to replace the cartridge.
• Nuclear-grade resin is enclosed in a virgin polypropylene canister to purify tap water.
• Simple maintenance: quarter-turn quick-release canister is easy to replace.
• Pura-lite notifies when it is time for a new cartridge.

• Ideal for applications requiring up to 38L/hr. of purified water
• Point-of-use polishing of pretreated water or single-stage treatment of tap water
• Direct-reading purity monitor
• Mounts on benchtop or wall

Includes:

• 3′ (91cm) inlet tubing