LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

YSI ODO Sensors for Monitoring and Control

Previous 8 / 12 Next

YSI ODO Sensors for Monitoring and Control Aquaculture Process Monitor and Sensors YSI Process & Engineering Products


Engineered specifically for aquaculture applications, the optical dissolved oxygen sensor can be used with the 5500D MultiDO monitor for process control to ensure adequate oxygen levels for your livestock or for improved energy efficiency. With YSI’s ODO® optical dissolved oxygen technology you’ll benefit from reduced costs, less maintenance and better data. The ODO sensors require no membrane changes, no electrode cleaning, no stirring for accurate data and less frequent calibrations.

You can also incorporate the DO sensor directly with your PLC via the RS485 communication. Additional inputs for barometric pressure and salinity are used to accurately calculate the DO % and mg/L.

Features:

  • Non-consumptive luminescent method eliminates stirring
  • No warm-up time required
  • Smart sensor retains calibration in the probe
  • Compatible with 5500D MultiDO monitor and the IOEM and REM expansion modules
  • User-replaceable, low maintenance DO cap with +1 year life
  • Tank-side calibration when used with the YSI 5500D monitor
  • Ability to connect to PLC
  • Communication via RS485
  • 2-year cable and probe warranty

Applications:

  • Recirculating systems
  • Raceways
  • Ponds
  • Sea cages
  • Live haul
  • Aquariums
  • Research
  • Tanks
Specification:-

Accuracy

0 to 200% air saturation ±1% of the reading or ±1% air saturation, whichever is greater; 200 to 500% air saturation ±10% of the reading; 0 to 20 mg/L ±0.1 mg/L or ±1% of reading, whichever is greater; 20 to 50 mg/L ±10% of the reading; ±0.2 ºC

Certifications CE, RoHS, WEEE, C-Tick, VCCI, IP-67, Made in USA
Connectivity / Communications RS485, proprietary communication
Equipment used with 5500D
Measurement Range

0 to 500% air saturation; 0 to 50 mg/L; -5 to 70 oC (23 to 158 oF)

Parameters Measured

Dissolved Oxygen (optical), Temperature

Power 6.3 VDC at 10-20 mA
Resolution

0.1% air saturation; 0.01 or 0.1 mg/L (auto scaling); 0.1 ºC

Response Time 90% of reading in 25 seconds; 95% of reading in 45 seconds (typical response times with no stirring; sample movement will improve typical response times)
Size

Length: 19 cm (7.5 in); Diameter 2.4 cm (0.95 in)

Storage Temperature -20 to 70ºC (-4 to 158ºF)
Warranty

2-years cable and probe; 1-year sensor cap (actual sensor cap life may be longer)


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version