Type K high temperature probe with mini connector

The 881602 is a Type K Surface Probe. For use with any meter that has a Type K connector
 

• High temperature range: -40 to 932°F (-40 to 500°C)
• 70.8'' (1.8m) coiled cable with Type K mini connector
• Compatible with most multimeters that have Type K temperature function
• 6'' (150mm) probe length; 0.314'' (8mm) diameter

Type K temperature probe with mini connector

The 881616 is a Type K Magnetic Grill Temperature Probe. For use with any meter that has a Type K connector. This grill temperature probe features a temperature range from -40 to 482°F (-40 to 250°C). Comes with a 6 month warranty.
 

• Temperature range: -40 to 482°F (-40 to 250°C)
• Probe surface area: 1'' x 0.75''
• 6ft teflon cable with strain relief

10'' Flexible Clamp Adaptor for Multimeters/Clamp-On Meters

The CA3010 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3010 is a 10 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating.
 

• Measure AC Current up to 3000A
• Flexible 10'' (25.4cm) clamp jaw easily wraps around bus bars and cable bundles
• 7.5mm cable diameter fits into tight spaces and around large conductors
• Measures AC Current in three ranges
• Easy twist clamp cable closure to Lock or Open
• Compatible with most multimeters and clamp meters with standard sized banana plug inputs
• Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs, and two AAA batteries

Allows clamp meter to measure AC Current on a 2-wire or 3-wire power cord

This Extech 480172 Line Splitter provides a fast and easy way to “open” standard 120 Volt AC electrical lines, eliminating the need to cut off the plug and separate the conductors. When connected between a 120 Volt AC outlet and a device under test, this splitter separates the hot/live conductor from the neutral and ground, which enables users to measure AC current up to 15 Amp on a two-wire or three-wire lines using a clamp meter. This splitter also features two Voltage Test jacks so that voltage can be measured using a multimeter.
 

• Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
• Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
• Also features voltage check function

18'' Flexible Clamp Adaptor for Multimeters/Clamp-On Meters

The CA3018 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3018 is an 18 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating.
 

• Measure AC Current up to 3000A
• Flexible 18'' (45.7cm) clamp jaw easily wraps around bus bars and cable bundles
• 7.5mm cable diameter fits into tight spaces and around large conductors
• Measures AC Current in three ranges
• Easy twist clamp cable closure to Lock or Open
• Compatible with most multimeters and clamp meters with standard sized banana plug inputs
• Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs, and two AAA batteries

Soft vinyl carrying case (6.7 x 3.8 x 2.3'') with shoulder strap and side pockets

The CA500 is a protective medium sized vinyl carrying case. Protects meters and accessories from dirt and debris. Comes with a 6 month warranty. The CA500 is versatile and features a belt loop and shoulder strap.

• Size: 6.7 x 3.8 x 2.3'' (170 x 97 x 58mm)

Soft vinyl carrying case (9.6 x 5.3 x 3.1'') with shoulder strap

The CA899 is a Large Protective Carrying Case. For use with Extech test meters and accessories. Comes with a 6 month warranty. The CA895 is versatile and features a belt loop and shoulder strap for hands free carry.

Size: 9.6 x 5.3 x 3.1'' (245 x 134 x 80mm)

Soft vinyl carrying case (9.5 x 7.2 x 2.9'') with wrist strap

The CA900 is a Wide Protective Carrying Case. For use with Extech multi-meter kits and accessories. Comes with a 6 month warranty. The CA900 features a wrist strap for safe carry of your Extech Test meters.

• Size: 9.5 x 7.2 x 2.9'' (241 x 182 x 73mm)

Hands-free superheat/subcooling temperature measurement

The Extech TP200 Type K Pipe Clamp Temperature Probe produces a hands-free, super heat and sub cooling temperature measurement. The spring-loaded jaw is for a secure grip on pipes from 0.25 inches (6.35mm) to 1.5 inches (38mm) in diameter. This probe is for use with any thermometer or multimeter with a Type K thermocouple input. The measurement range is from -4 to 200°F (-20 to 93°C) with and accuracy of ±3.6°F (1.8°C). The Extech TP200 Type K Pipe Clamp Temperature Probe comes complete with an attached 36 inch (0.9m) cable and a Type K connector.

• Spring-loaded jaw for secure grip on pipe from 0.25'' (6.35mm) to 1.5'' (38mm) diameter
• For use with any Thermometer or MultiMeter with a Type K thermocouple input
• Measurement range: -4 to 200°F (-20 to 93°C)
• Accuracy: ±5% full scale
• Complete with attached 36'' (0.9m) cable and Type K connector

Hands-free superheat/subcooling temperature measurement

The Extech TP400 Type K High Temperature Pipe Clamp Probe produces a hands-free, super heat and sub cooling temperature measurement. The spring-loaded jaw is for a secure grip on pipes from 0.25 inches (6.35mm) to 1.5 inches (38mm) in diameter. This probe is for use with any thermometer or multimeter with a Type K thermocouple input. The measurement range is from -4 to 450°F (-20 to 232°C) with an accuracy of ±3.6°F (1.8°C).
 

• Spring-loaded jaw for secure grip on pipes from 0.25'' (6.35mm) to 1.5'' (38mm) diameter
• For use with any Thermometer or MultiMeter with a Type K thermocouple input
• Measurement range: -4 to 450°F (-20 to 232°C)
• Accuracy: ±3.6°F (1.8°C)
• Complete with attached 36'' (0.9m) cable and Type K connector

Type K temperature probe with mini connector

The TP870 is a Type K temperature probe with mini connector and temperature range from -40 to 250-Degrees C. This type K mini connector is compatible with most meters that have Type K temperature function.
 

• Temperature range: -40 to 482°F (-40 to 250°C)
• Type K mini connector
• Compatible with most multimeters that have Type K temperature function

Type K temperature probe with mini connector and banana plug adaptor

The TP873 is a Bead Wire Type K Temperature Probe. Compatible with most test instruments that have a Type K Temperature input. Comes with a 6 month warranty.

• Temperature range: -22 to 572°F (-30 to 300°C)
• Type K mini connector and banana plug adaptor
• Compatible with most multimeters that have Type K temperature function

Type K temperature probe with mini connector and banana plug adaptor

The TP873-5M is an extra-long bead wire type K temperature probe. The TP873-5M is a 5 meter long temperature probe with a mini connector and banana plug adaptor. Comes with a six month warranty.

• Long cable - 16.4ft (5m)
• Temperature range: -22 to 572°F (-30 to 300°C)
• Type K mini connector and banana plug adaptor
• Compatible with most multimeters that have Type K temperature function

Type K high temperature probe with mini connector and banana plug adaptor

Extech's TP875 is a bead wire temperature probe. This Type K thermocouple probe measures from -58 to 1000°F (-50 to 538°C) with a subminiature (mini-ANSI) connector. Compatible with most meters that have Type K temperature function.
 

• High temperature range: -58 to 1000°F (-50 to 538°C)
• 39'' (1m) cable, type K mini connector and banana plug adaptor
• Compatible with most multimeters that have Type K temperature function

Type K high temperature probe with mini connector

Extech's TP882 is a penetration temperature probe. This Type K probe measures from -50 to 1000°F (-46 to 538°C) with a subminiature (mini-ANSI) connector. Compatible with most meters that have Type K temperature function.

• High temperature range: -50 to 1000°F (-46 to 538°C)
• Type K mini connector
• Compatible with most multimeters that have Type K temperature function