LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.
+603-5525 3833
+603-5525 3832

Automotive Meters

Extech AUT-TLM Car Fuse Adapter Test Leads

Automotive Fuse Adaptor with Mini-blade connector

  • Mini-blade connector plug into the fuse block
  • Measuring range: 20A/48VDC (10 sec max)
  • 2.6ft (80cm) connector cable with standard shrouded right-angle banana plugs for use with virtually any DMM with a 20A current input
  • ±2% accuracy

Extech AUT-TL Car Fuse Adapter Test Leads

Automotive Fuse Adaptor with ATC-blade connector

  • ATC-blade connector plug into the fuse block
  • Measuring range: 20A/48VDC (10 sec max)
  • 2.6ft (80cm) connector cable with standard shrouded right-angle banana plugs for use with virtually any DMM with a 20A current input
  • ±2% accuracy

Extech MA445 400A True RMS AC/DC Clamp Meter + NCV

Clamp Meter with Non-Contact Voltage Detector and Type K

Three models to choose from, with or without True RMS and AC or AC/DC Current functions. Choose True RMS model for accurate readings of non-sinusoidal waveforms, model with DC Current function for automotive applications, or model with Type K function when applications require Temperature measurements. The MA440 Series meters are fully loaded with multimeter functions and built-in non-contact voltage (NCV) detector to meet your application needs!

  • True RMS feature for accurate readings regardless of waveforms
  • 1.2'' (30mm) jaw size fits conductors up to 500MCM
  • Built-In Non-Contact Voltage Detector (NCV)
  • Large backlit LCD display and built-in Flashlight
  • Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Diode Test, Continuity
  • Relative mode for Capacitance, DC Zero and Offset Adjustment, Data Hold, Max/Min, Auto Power Off and Low Battery Indicator
  • Complete with test leads, three AAA batteries, general purpose Type K temperature probe and pouch
       Accessories:

Extech 380950: 80A Mini AC/DC Clamp Meter

Small diameter elongated jaw fits into tight spaces

The compact Extech 380950 is a mini AC/DC clamp meter. The 380950 has an extra-small diameter jaw designed to reach into very small areas while providing a 1 mA resolution and very low-current sensitivity. This amp clamp performs essential troubleshooting tasks in plant maintenance, electrical, HVAC, and telecom work as well as residential, automotive, fleet maintenance, marine, and motorcycle electrical repair. Complete with test leads, two 1.5V AAA batteries and carrying case.

  • 4000 count LCD display
  • 1mA resolution
  • Jaw opens to 0.5'' (12.7mm)
  • AC/DC Voltage, Resistance, Frequency, Capacitance, and Duty Cycle
  • Diode Test/Continuity Beeper
  • Data Hold
  • Complete with test leads, two 1.5V AAA batteries and carrying case

Extech ET30A Automotive Circuit Tester

6-24V DC Voltage Tester

The ET30A is a Automotive Circuit Tester. Ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems. Tests DC Voltage from 6 to 24V.

  • Tests DC Voltage from 6 to 24V
  • Ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems

Extech AUT80: 80A Current Tester

Automotive Current Tester with Mini, ATC and Max-blade connectors

The AUT80 checks up to 80 amps without breaking the circuit. Mini, ATC, and Maxi blade connectors plug into the fuse block. It features a measuring range of 80 amps/48 VDC (10 seconds, max) with 0.1 amp resolution and (±2 percent + 2 digits) accuracy. Results are displayed on a 3.5-digit LCD with bargraph.

  • Mini, ATC, and Max blade connectors with 3.9ft (1.2m) cable plug into the fuse block
  • Measuring range: 80A/48VDC (10 seconds max)
  • 0.1A resolution
  • ±(2% + 4 digits) accuracy
  • 3.5 digit LCD with bargraph
  • Data Hold and Zero function
  • Includes one 9V battery

Extech AUT20M: 20A Current Tester

Automotive Current Tester with Mini-blade connector

Check up to 20 amps without breaking the circuit with the AUT20M. Mini-blade connectors plug into the fuse block. It has a measuring range of 20 amps/48 VDC (10 seconds, max) with 10 mA resolution and (±2 percent + 2 digits) accuracy. Results are displayed on a 3.5-digit LCD. Includes 29.5-inch (75cm) connector cable.

  • Mini-blade connector plug into the fuse block
  • Measuring range: 20A/48VDC (10 seconds max)
  • 10mA resolution
  • 2.3ft (71cm) connector cable
  • ±(2% + 2 digits) accuracy
  • Includes one 12V A23G battery

Extech AUT20: 20A Current Tester

Automotive Current Tester with ATC-blade connector

AUT20 is an Automotive 20A Current Tester and ATC Fuse. The ATC-blade connectors plug directly into the fuse block for ease of use. Measuring range from 20A/48VDC (10 seconds max), 10mA resolution. Includes one 12V A23G battery.

  • ATC-blade connector plug into the fuse block
  • Measuring range: 20A/48VDC (10 seconds max)
  • 10mA resolution
  • 2.3ft (71cm) connector cable
  • ±(2% + 2 digits) accuracy
  • Includes one 12V A23G battery

Switch to Mobile Version