Test & Measurements FLIR Systems Test & Measurement Products Malaysia, Selangor, Kuala Lumpur (KL), Shah Alam Supplier, Suppliers, Supply, Supplies | LELab Sdn Bhd

LELab Sdn Bhd
18, Jalan Sungai Burung U32/U,
Seksyen 32, Bukit Rimau,
40460 Shah Alam,
Selangor Darul Ehsan, Malaysia.

+603-5525 3833

+603-5525 3832

sales@lelab.com.my

Test & Measurements

25 - 48 of 48 \|<1 2 >\|
FLIR MR59 BALL PROBE MOISTURE METER WITH BLUETOOTH® The FLIR MR59 is a pinless meter with wireless connectivity, which offers the convenience to view live readings from a mobile device via the FLIR Tools® Mobile app. Thanks to the ball-shaped sensor, users can cover a large area in a short time without making a mark; measure into corners and around baseboards easily; and detect problems below the surface. LOCATE HIDDEN MOISTURE EFFICIENTLY The ball-shaped sensor helps you quickly cover a large area – or into corners and around baseboards – without leaving a mark. OPTIMIZE YOUR WORKFLOW Use Bluetooth® to view readings from a mobile device. INSPECT ANYWHERE WITH EASE Take this durable, drop-tested meter to any job. Features a backlit display and bright worklight for dim light conditions.	FLIR MR55 PIN MOISTURE METER WITH BLUETOOTH® The FLIR MR55 is a pin-based meter with wireless connectivity, which offers the convenience to view readings from a mobile device via the FLIR Tools® Mobile app. Thanks to a built-in library of 11 material groups, users can tune the meter to the appropriate test material to improve measurement accuracy. This library is easy to access on the FLIR.com website by scanning a QR code on the back of the meter with a mobile device. TAKE ACCURATE MEASUREMENTS Test from 11 material groups with pin probes. Measurements automatically compensate for ambient temperature. OPTIMIZE YOUR WORKFLOW Use Bluetooth® to view readings from a mobile device. INSPECT ANYWHERE WITH EASE Features replaceable electrode pins, standard AA batteries, a backlit display, and a bright worklight to help make your job seamless.	FLIR VT8-Series VOLTAGE, CONTINUITY, AND CURRENT TESTER The FLIR VT8-Series are high-quality voltage, continuity, and current testers. They feature an optimized, open-jaw design that can fit into tight spaces and reliably measure large-diameter cables. The VT8-600 carries a CAT III-600 V/CAT IV-300 V safety rating and a 100 A/600 V measuring range, while the VT8-1000 carries a CAT III-1000 V/CAT IV-600 V safety rating and a 200 A/1000 V measuring range. Extensive measurement features make the VT8-Series versatile tools – just one meter can get the job done. Your go-to troubleshooting electrical tester RUGGED AND SAFE Made with the quality and reliability you have come to expect from FLIR test and measurement tools RICH FEATURES Equipped with the capabilities you need including True RMS, AC/DC voltage and current, continuity, resistance, and capacitance FLEXIBLE, EASY TO USE Take measurements in tight spaces with the optimized jaw design, and measure large-diameter cables with the wide jaw opening	FLIR VP50 NON-CONTACT VOLTAGE DETECTOR + WORKLIGHT The FLIR VP50 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts - tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP50 to reliably detect voltages on the latest tamperproof outlets and electrical systems installed using modern construction methods. RUGGED AND DURABLE Designed for long product life cycles and 3m (9.8') drop tested, the VP50 will last you for years to come. ENHANCED DETECTION Reliably detects voltage in the latest safety outlets, and the low-profile probe tip gets the sensor closer to electrical sources. INTELLIGENT DESIGN Built to reduce the chance of dropping, the VP50 has an anti-roll case with double molded slip resistant grip.
FLIR VP40 NON-CONTACT VOLTAGE DETECTOR + FLASHLIGHT The FLIR VP40 is a high-quality non-contact AC voltage detector (NCV) and flashlight that offers high-end features, making it the best value product in its category. The reliable, durable detector includes a bright flashlight, a vibration feedback alarm, and a CAT IV safety rating. Use it to identify live and neutral wires in sockets and junction boxes, and to trace live and neutral wires without contact. Ideal for field-troubleshooting and electrical installation verification RUGGED AND RELIABLE Features a high-quality, durable design for safety and long-term, trouble-free operation. Detect voltage in the latest safety outlets EASY TO USE Avoid touching live wires with NCV technology, and reduce risk of dropping the VP40 with double molded slip-resistant grip and an anti-roll case TROUBLESHOOT QUICKLY Provides features that can improve work efficiency, including a bright flashlight, auto power off, and low-battery indication	FLIR RT50 RECEPTACLE TESTER WITH GFCI CHECK The RT50 is a reliable GFCI receptacle tester designed for electricians, home or building inspectors, and do-it-yourselfers who need to verify or troubleshoot operation of 3-wire receptacle circuits within residential and commercial buildings. It is durable, easy, and safe to use, and offers the quality you have come to expect from FLIR test and measurement products. Troubleshoot and verify operation of 3-wire receptacle circuits HIGH QUALITY, DURABLE, AND SAFE Made with an impact-resistant case to handle the roughest jobs, and meets C-UL-US safety standards RELIABLE PERFORMANCE Provides all the features you require to verify correct wiring and test for common wiring problems EASY TO USE Designed for long-term, trouble-free operation, with bright indicator lights, test code light legend on both sides, and an ergonomic design	FLIR DM62 TRMS DIGITAL MULTIMETER WITH NON-CONTACT VOLTAGE The DM62 offers essential measurement features including True RMS AC/DC voltage and current, non-contact voltage detection, VFD mode, and extended voltage measurement range up to 600 V. Whether you're a commercial electrician, electronics technician, or just need the right tool for DIY, the DM62 provides precise measurements and quality construction for everyday use. The right DMM for electrical, electronics, and DIY ALL THE FEATURES YOU NEED Offers rich features for various electrical applications including AC/DC measurement, safe non-contact voltage detection, a flashing backlight, and audible indicator. FAST, EFFICIENT TESTING AND TROUBLESHOOTING Navigate the meter’s on-screen menu system easily, and operate one-handed thanks to the compact design and easy-to-access buttons. TOUGH, RELIABLE, HIGH QUALITY The DM62 is drop-tested, IP40 rated, and has a CAT IV-300V, CAT III-600V safety category rating to ensure safe and accurate operation.	FLIR DM64 HVAC TRMS DIGITAL MULTIMETER The FLIR DM64 is the right choice for professionals who install, inspect, and maintain HVAC systems. It includes microamp measurement to test flame sensors, LoZ mode to prevent ghost voltage, measures capacitance and frequency, and features a Type-K thermocouple input for temperature measurement. A flashing backlight and audible indication simplify the task of checking wiring connections and switch operation in noisy work environments; and probe-contact voltage detection helps you more precisely identify live wires. The right DMM for HVAC professionals RICH FEATURES FOR HVAC PROFESSIONALS Diagnose complex systems with high- and low-voltage measurement capabilities, test flame sensors with microamps, assess temperatures up to 400°C, and identify live wires. MAKES YOUR JOB EASIER Features an intuitive on-screen menu system and enhanced ergonomics; Relative Zero mode helps you identify deviations from normal conditions. TOUGH, STABLE, AND HIGH QUALITY The DM64 is durable and drop-tested with an IP40 rating to last you for years.
FLIR DM66 TRMS MULTIMETER WITH VFD MODE The DM66 digital multimeter is ideal for automation field service or electronics technicians, providing a comprehensive feature set including low impedance (LoZ) mode, frequency, diode, capacitance, and a Type K thermocouple input for temperature measurement. The multimeter combines rich features, precise measurements, and quality construction into a tool of exceptional value. Easy to use and built to last, the DM66 offers long-term stability for everyday use. Your DMM for automation field service and electronics ALL THE FEATURES YOU NEED Provides rich features for various electrical applications including AC/DC measurement, safe non-contact voltage detection, a flashing backlight, and audible indicator. QUICK, EFFICIENT TESTING AND TROUBLESHOOTING Navigate the meter’s on-screen menu system easily, and operate one-handed thanks to the compact design and easy-to-access buttons. HIGH QUALITY, TOUGH, RELIABLE The DM66 is drop-tested, IP40 rated, and has a CAT IV-300V, CAT III-600V safety category rating to ensure safe and accurate operation.	FLIR DM90 TRMS MULTIMETER WITH TYPE K TEMP The DM90 is an affordable True RMS digital multimeter with a Type-K Thermocouple, an ideal tool for electricians, service technicians, and HVAC professionals to have on the job. With rich features including LoZ, VFD Mode and uA current measurement capability, the DM90 gives you trusted readings to troubleshoot and repair a wide range of electrical and electronic systems. The DM90 is shipped fully tested and calibrated, and with proper use, will provide years of reliable service. The tool of choice for troubleshooting TRUSTED, ACCURATE READINGS Diagnose complex systems with True RMS, LoZ, VFD, and more. Assess temperatures up to 400°C (752°F) with the Type-K thermocouple. AN IDEAL FIELD TOOL Simplify your job with LED worklights, a customizable settings option menu, a digital LCD display, and on-screen programming menu navigation. BUILT TO LAST Made tough for protection against water (IP54 rating) and a 3-meter drop.	FLIR DM91 INDUSTRIAL TRMS MULTIMETER WITH DATALOGGING (WIRELESS) The FLIR DM91 offers comprehensive features and durable design for quick and safe troubleshooting of electrical, electronic, and HVAC/R systems. Equipped with LoZ, VFD Mode, µA current measurement capability and more, the DM91 provides trusted results for the most accurate diagnosis of problems. The DM91 is enhanced with Bluetooth® technology to wirelessly connect via METERLiNK® to FLIR infrared cameras, or to mobile devices running FLIR ToolsTM or the FLIR InSiteTM workflow management system. Your tool for field inspection, troubleshooting, and diagnostics TRUSTED, ACCURATE READINGS Diagnose complex systems with True RMS, LoZ, VFD, and more. Assess temperatures up to 400°C (752°F) with the Type-K thermocouple. WORK LONGER WITHOUT INTERRUPTION DM91 offers powerful LED worklights and flexible battery options; datalogging and storage allows you to document intermittent trends. STREAMLINE REPORTING AND SHARING Bluetooth METERLiNK® allows you to wirelessly share readings with clients or embed data into FLIR thermal camera images.	FLIR DM92 TRUE RMS INDUSTRIAL MULTIMETER FLIR’s DM92 and DM93 world-class digital multimeters offer advanced variable firequency drive filtering to help you accurately analyze non-traditional sine waves and noisy signals. No matter what electrical challenge you're up against, the DM92 and DM93's powerful lighting and durable design will make the job simple. The DM93 offers additional features including Bluetooth technology to connect a compatible smartphone for remote viewing and sharing, and METERLiNK® technology, to wirelessly embed electrical readings into radiometric infrared images on compatible FLIR thermal cameras. ACCURATE READINGS The DM92 and DM93 provide features that make it easy to clearly analyze non-traditional sine wave and noisy signals including advanced variable firequency drive filtering and dual display, True RMS voltage and current, and LoZ mode. EFFICIENT ILLUMINATION AND DESIGN Constructed to make any electrical challenge easier to troubleshoot, the DM92 and DM93 offer powerful LED worklights to eliminate the need for a flashlight in dim lighting, durable double-molded construction (IP54, 3m drop test), large, easy-to-read digits, a backlit display, and an analog bargraph.
FLIR DM93 TRUE RMS INDUSTRIAL MULTIMETER The FLIR DM93 world-class digital multimeter offers advanced variable frequency drive filtering to help you accurately analyze non-traditional sine waves and noisy signals. No matter what electrical challenge you're up against, the DM93's powerful lighting and durable design will make the job simple. The DM93 also features Bluetooth® technology to connect a compatible smartphone for remote viewing and sharing, as well as METERLiNK® technology to wirelessly embed electrical readings into radiometric infrared images on compatible FLIR thermal cameras. Take the guesswork out of electrical troubleshooting ACCURATE READINGS Provides advanced variable frequency drive filtering and dual display, True RMS voltage and current, and LoZ mode. EASY TO TROUBLESHOOT Offers LED worklights to eliminate the need for a flashlight, durable construction, a backlit display, and an analog bargraph. REMOTE VIEWING AND SHARING Bluetooth® enables wireless data transfer and METERLiNK® technology embeds data into live and saved thermal images from FLIR thermal cameras.	FLIR DM166 IMAGING TRMS MULTIMETER The FLIR DM166 is the most affordable multimeter with built-in thermal imaging — a must-have tool for commercial electricians, automation, electronics, and HVAC technicians. Featuring Infrared Guided Measurement (IGM™) powered by an 80 x 60 FLIR thermal imager, the DM166 visually guides you to the precise location of temperature anomalies and potential problems faster, more safely, and efficiently. The feature-packed multimeter is an ideal tool for troubleshooting and diagnosing complex issues in both high- and low-voltage applications. The most affordable DMM with built-in thermal imaging TROUBLESHOOT FASTER Quickly scan for overheating components with IGM, and diagnose faults with broad DMM test functions WORK SAFER Identify energized and potentially faulty equipment from a safe distance using non-contact temperature measurement DIAGNOSE PROBLEMS MORE EFFICIENTLY Provides a rich feature set for both high-voltage and low-voltage applications: Variable Frequency Drive, resistance, frequency, capacitance, and more.	FLIR DM284 IMAGING MULTIMETER WITH IGM™ The FLIR DM284 is a professional, all-in-one True RMS digital multimeter and thermal imager ideal for field electronics, commercial electric, light industrial, field service, and HVAC work. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 × 120 FLIR thermal imager, the DM284 visually guides you to the precise location of an electrical problem without direct contact. You'll pinpoint hot spots faster, safer, and more efficiently. The DMM you can't afford to work without PINPOINT PROBLEMS QUICKLY AND SAFELY Find more work by visually identifying issues with IGM, and scan a panel or cabinet for hazards without direct contact. SOLVE CHALLENGING PROBLEMS EASILY Performs 18 DMM measurement functions to help you verify the most complex electrical issues with trusted readings every time BUILT TO LAST Durable and drop tested, DM284 features built-in worklights, large display screen, onboard laser pointer, and an intuitive user interface	FLIR DM285 INDUSTRIAL IMAGING MULTIMETER WITH IGM™ The FLIR DM285 is a professional, all-in-one True RMS digital multimeter and thermal imager. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 x 120 FLIR thermal imager, the DM285 visually guides you to the precise location of an electrical problem without direct contact. You’ll pinpoint hot spots faster, safer, and more efficiently. The DM285 also helps streamline inspections by connecting wirelessly to FLIR Tools® app for uploading thermal images and measurement data. PINPOINT PROBLEMS QUICKLY AND SAFELY Find more work by visually identifying issues with IGM, and scan a panel or cabinet for hazards without direct contact. SOLVE CHALLENGING PROBLEMS EASILY Performs 18 DMM measurement functions to help you verify the most complex electrical issues with trusted readings every time STREAMLINED REPORTING AND SHARING Features Bluetooth METERLiNK® to wirelessly embed data into thermal images from FLIR infrared cameras, or instantly share readings with client
FLIR IM75 INSULATION & DMM COMBO WITH METERLINK® The FLIR IM75 is both a premier handheld insulation tester and advanced multifunction digital multimeter for installation, troubleshooting, and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption, and Earth Bond Resistance. Insulation tests can be performed instantly, continuously, and over a timed duration for in-depth assessment. The meter features METERLiNK® to embed electrical measurements into thermal images captured by FLIR infrared cameras, and Bluetooth® to view real-time readings remotely. One tool for both insulation and electrical testing DMM AND INSULATION TESTER COMBO All the functions you need in one tool including multiple resistance ranges for insulation test levels and wireless capabilities. TRUE MEASUREMENTS, RELIABLE PERFORMANCE Provides features for advanced insulation tests including True RMS measurements with 1000V range, VFD mode, and three insulation modes. EFFICIENT ILLUMINATION AND RUGGED DESIGN Equipped with bright LED worklights to illuminate test areas and targets, a multi-color LED display, and durable double-molded construction.	FLIR TG297 INDUSTRIAL HIGH TEMP THERMAL CAMERA The FLIR TG297 is a one-of-a-kind industrial diagnostic tool that combines accurate temperature measurement with the ability to image up to 1030°C (1886°F). Patented FLIR MSX® (Multi-Spectral Dynamic Imaging) enhancement improves image clarity by embossing visual scene details on full thermal images. The TG297 is ideal for high-temperature industrial uses such as measuring the heat of glass furnaces, kilns, and forges as well as manufacturing applications, allowing you to accurately target potential faults, troubleshoot repairs, and monitor processes. Record images to assure your team that machinery and systems are functioning safely and at peak efficiency. IDENTIFY PROBLEMS QUICKLY Measure a wide range of temperatures from -25°C to 1030°C (-13°F to 1886°F) with a true 160 × 120 IR pixel imager (19,200 pixels) PRODUCE CRISP THERMAL IMAGES Diagnose problems faster on extreme heat targets by engaging the high temperature filter over the lens to create a detailed image WORK WITH CONFIDENCE IN RUGGED ENVIRONMENTS Work from a safe distance to measure high-temperature objects (e.g. a glass furnace) with a portable tool protected by an IP54 enclosure	FLIR TG275 THERMAL CAMERA FOR AUTOMOTIVE DIAGNOSTICS The FLIR TG275 is designed specifically for automotive maintenance and repair technicians who want to accelerate diagnostic procedures and avoid undetected problems. Featuring IGM™ (Infrared Guided Measurement), this diagnostic tool combines non-contact temperature measurement and thermal imaging to help you troubleshoot repairs, spot potential faults, and record images that will reassure your customer that the problem has been fixed. This affordable thermal imager is ideal for diagnosing problems in relays and switches, parasitic drain on the battery, drive train components, HVAC system (vents), and much more. IDENTIFY MORE PROBLEMS, FASTER 19,200 pixel IR camera and temperature range up to 550°C (1022°F) surpass the limitations of spot IR thermometers SUPERIOR IMAGE QUALITY, AFFORDABLE PRICE Get the sharp visual detail of FLIR MSX®, displayed on a vibrant 2.4-inch screen RUGGED AND RELIABLE Tough, drop-tested design with an IP54 enclosure that protects the camera from dirt, dust, and oil	FLIR TG267 THERMAL CAMERA The FLIR TG267 takes you beyond the limitations of single-spot IR thermometers to both see and evaluate the hot and cold spots that can indicate serious issues. Ideal for commercial electrical, facility maintenance, and HVAC applications, this advanced thermal camera with a brilliant 2.4 inch screen reduces diagnostic time while simplifying repair and maintenance reporting. Patented FLIR MSX® (Multi-Spectral Dynamic Imaging) enhancement improves image clarity by embossing visual scene details on full thermal images, providing added context to help you accurately target potential faults and troubleshoot repairs. Record images to monitor maintenance history and reassure your customer that problems have been resolved. IDENTIFY PROBLEMS QUICKLY Measure a wide range of temperatures from -25°C to 380°C (-13°F to 716°F) with a true 160 × 120 IR pixel imager (19,200 pixels) PRODUCE CRISP THERMAL IMAGES Display and record MSX®-enhanced thermal images or visual images with temperature readings WORK WITH CONFIDENCE IN RUGGED ENVIRONMENTS Work safely and worry-free knowing that the IP54 enclosure can withstand a 2-meter drop and protect against dust and water
FLIR TG167 SPOT THERMAL CAMERA FOR ELECTRICAL The FLIR TG167 Spot Thermal Cameras bridge the gap between single spot infrared thermometers and FLIR's legendary thermal cameras. Equipped with FLIR's exclusive Lepton® micro thermal sensor, these cameras let you see the heat so you know exactly where to target the measurement spot. Easily find unseen hot and cold spots for instant troubleshooting, and store images and data to show customers and include in reports. It's all in the details SEE SMALL DETAILS CLEARLY The 25° field of view provides image clarity on tiny details from a farther distance, including small connectors and wires. INTUITIVE TO OPERATE Easily save images and data for documentation, and download images fast over USB or via removable micro SD. RUGGED AND RELIABLE Designed for the harshest environments, the TG167 is durable enough to withstand a 2-meter drop for your toughest jobs.	FLIR TG165 SPOT THERMAL CAMERA FOR GENERAL USE The FLIR TG165 Spot Thermal Cameras bridge the gap between single spot infrared thermometers and FLIR's legendary thermal cameras. Equipped with FLIR's exclusive Lepton® micro thermal sensor, these cameras let you see the heat so you know exactly where to target the measurement spot. Easily find unseen hot and cold spots for instant troubleshooting, and store images and data to show customers and include in reports. See the big picture WIDE FIELD OF VIEW The wide 50° field of view makes it easy to frame an entire wall in a single image for building diagnostics INTUITIVE TO OPERATE Easily save images and data for documentation, and download images fast over USB or via removable micro SD. RUGGED AND RELIABLE Designed for the harshest environments, the TG165 is durable enough to withstand a 2-meter drop for your toughest jobs.	FLIR TG56 30:1 SPOT IR THERMOMETER WITH TYPE K THERMOCOUPLE The FLIR TG56 provides non-contact surface temperature readings so you can quickly and easily take measurements in places that are out of reach. Providing a distance-to-spot ratio of 30:1, the TG56 can measure smaller targets from a safer distance. The thermometer gives you control to view your current reading and last two temperature readings simultaneously, and the color screen makes it easy to navigate and select settings. Measure small targets at a safer distance WORK SAFELY Provides non-contact temperature measurement and a 30:1 spot ratio to measure smaller targets from a safer distance. SIMPLE TO USE The TG56's graphical menu structure and color display provide easy access to settings and clear navigation. PORTABLE AND RUGGED DESIGN Built to withstand a 3-meter drop, the industrial and compact design makes it easy to carry wherever you need it.	FLIR TG54 24:1 SPOT IR THERMOMETER The FLIR TG54 provides non-contact surface temperature readings so you can quickly and easily take measurements in places that are out of reach. Providing a distance-to-spot ratio of 24:1, the TG54 can measure smaller targets from a safer distance. The thermometer gives you control to view your current reading and last two temperature readings simultaneously, and the color screen makes it easy to navigate and select settings. Hard to reach just got easier MEASURE SAFELY Provides non-contact temperature measurement and a 24:1 spot ratio to measure smaller targets from a safer distance. SIMPLE TO USE The TG54's graphical menu structure and color display provide easy access to settings and clear navigation. PORTABLE AND RUGGED DESIGN Built to withstand a 3-meter drop, the industrial and compact design makes it easy to carry wherever you need it.
25 - 48 of 48 \|<1 2 >\|

© 2019 - 2024 LELab Sdn Bhd (628352-H) | Privacy Policy Visitors: 2768091

Powered by NEWPAGES

Switch to Mobile Version